• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.68-78
• /
• 2020

Crop models have been used to predict vegetable crop yield, which would have a considerable economic impact on consumers as well as producers. A small number of models have been developed to estimate growth and yield of vegetables due to limited availability of growth observation data in high-quality. In this study, we aimed to analyze the protocols designed for collection of the observation data for major vegetable crops including cabbage, radish, garlic, onion and pepper. We also designed the protocols suitable for development and verification of a vegetable crop growth model. In particular, different measures were proposed to improve the existing protocol used by Statistics Korea (KOSTAT) and Rural Development Administration (RDA), which would enhance reliability of parameter estimation for the crop model. It would be advantageous to select sampling sites in areas where reliable weather observation data can be obtained because crop models quantify the response of crop growth to given weather conditions. It is recommended to choose multiple sampling sites where climate conditions would differ. It is crucial to collect time series data for comparison between observed and simulated crop growth and yield. A crop model can be developed to predict actual yield rather than attainable yield using data for crop damage caused by diseases and pests as well as weather anomalies. A bigdata platform where the observation data are to be shared would facilitate the development of crop models for vegetable crops.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.175-181
• /
• 2015

In this paper, we propose a design method for a digital filter using software in order to analyze the radio astronomy observation data. Recently the analysis method for radio astronomy observing system is transferring from hardware to software by developing of state-of-the-art of computer system. The existing hardware system is not able to easily change the specification because it is implemented to meet special requirements and it takes a high cost and time. In case of software, however, it has an advantage to implement with small cost if open software is used, and flexibly changes to satisfy the desired specification. But, in order to analyze the massive data like radio astronomy with software, the good performance system is needed for computer. Therefore, this paper proposes a digital filter design method using software with the same performance as that of digital filter implemented with hardware in observation system which is operated by the KVN(Korean VLBI Network). To design a digital filter, the proposed method is performed with standard C language and the simulation is conducted with GNU(GNU's Not Unix) Octave and investigated to show its effectiveness. In addition, for the high speed operation of the designed digital filter, the SSE(Streaming SIMD Extensions) library is adopted for available parallel operation. By the proposed digital filter, the digital filtering is performed for the wide band observation data in the KVN observation mode, the filtering result of narrow band observation has no ripple inside of stop band, and confirmed the effectiveness of the proposed method.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.3
• /
• pp.89-104
• /
• 2017

Considering the advent of the Fourth Industrial Revolution, this study examines the changes and influences of intelligent information technology and the role of consumer education in the context of consumption life. The purpose of this study is to provide a theoretical foundation to effectively respond to the future consumption society as an independent consumer by enhancing the understanding of the Fourth Industrial Revolution in terms of consumption life. First, in terms of changes in the consumption paradigm in the Fourth Industrial Revolution, production and consumption are converged by being shared through a comprehensive connection platform in real time. Regarding the meaning of consumption, mental experience is being emphasized; moreover, usage and sharing, rather than ownership, are being highlighted. In terms of major changes in consumption life, the emergence of a more convenient smart consumption life and the possibility of personalized consumption optimized for individual demand are anticipated. Moreover, sustainable eco-friendly consumption is expected to increase further, and rapidly changing consumption trends will experience accelerated progress in consumer-centered changes. Next, the predicted problems in consumption life in the Fourth Industrial Revolution include unequal consumption due to intelligent information technology power center and the use and management of personal information data. Furthermore, ethical concerns related to the introduction of new technologies will become prominent, eventually resulting in issues concerning consumption satisfaction. To effectively respond to these new paradigm changes, consumer education should be value-centered. Ethical aspects of consumption should be considered, and consumption life should include trust and mutual cooperation. Furthermore, consumer education should facilitate creative convergence.

• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.149-164
• /
• 2014

The representative landscapes in Jeju Island called as Ten sceneries of Yeongju originates with Ten sceneries of Tamra which were organized in the late seventeenth century by Jeju governor Lee Iktae. In order to compose ten representative sceneries in Jeju Island, he selected four strongholds such as Jocheon, Byeolbang, Seogwi and Myeongwol and six places of scenic beauty such as Seongsan, Baekrokdam, Yeonggok, Cheonjiyeon, Sanbang and Chwibyeongdam, and made a painting named as Ten sceneries of Tamra. Since the scenes of strongholds also exhibit a lot of geomorphic landscapes, the painting could be considered a collection of representative landforms in Jeju Island. The painting depicts several types of landform such as volcano, crater, river, waterfall, pool, wetland, cavern, tor and rocky coast. The volcanic edifice appears most frequently in the painting, reflecting the particular emotion of Jeju people on Mt. Halla and oreums. However, another volcanic landform, a lava tube, was not highly evaluated due to its negative images. Three famous waterfalls in Jeju Island were included in Ten sceneries of Tamra, and it suggests that they are essentially outstanding landforms, and besides, there are few sites related with fresh water in Jeju Island. The ten sceneries were entirely organized in spite of the limitation of selecting places at that time. The landscape images of Jeju Island, which had been shared as collective representation by Jeju people, were firstly externalized through Lee Iktae's painting, and have long been passed down and established a kind of scenic stereotype.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.3
• /
• pp.207-236
• /
• 2013

This article aims to understand the process of effective leadership in the Community Care Centers for the Disabled(CCCD). Using a qualitative approach and the concept of 'Sensemaking', a term introduced by Weick (1995), I described and explored the process of leadership. Sensemaking enables leaders to have a better grasp of what is going on in their environments. Sensemaking theory offers a perspective on leadership that resolves successfully complex situations surrounding the CCCD. The CCCDs face the environmental changes such as a paradigm shift of disability and a rivalry system with private services. In this time of uncertain change, the CCCDs are in need of leadership of the executives who could reduce complexity with shared meaning. Data were collected over 5 weeks from the 6 CCCDs, through semi-structured interviews, with practitioners, middle managers and chief executives. The interview scripts were thematically analyzed through Atlas-ti programme. The findings showed three subjects, the people's perception of environment, organizational visioning and interactions among post positions. Even though the 6 CCCDs were under the same environment, the perceptions and the enactments of the practitioners were influenced by the chief executives' sensemaking. The important factors of the chief executives' sensemaking were the daily interaction as well as ongoing reflection on their experiences.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.298-309
• /
• 2019

Objectives: This study aimed to investigate stages of safety and health culture change through a reflection on 40 years of hearing conservation history at a multinational company. Methods: The target workplaces were multinational companies with more than 1,000 employees. The research used the clinical case study and system analysis methods based on direct observation of the research from 1994 to 2009. The latter method performed an analysis of the equilibrium state of the cross-section in the given period and the longitudinal profile of the change during the given period. Results: The stages of cultural change are divided into five stages and summarized as follows. In the first stage, workplace noise was not widely recognized as a hazard, while in the second stage, the measurement of noise levels and audiometric testing were conducted under the Korean Occupational Safety and Health Act (KOSHA). The driving force for change in the second stage was the amendment of the KOSHA. In the third stage, noise came to be recognized as a hazard factor through awareness training. The driving force of change during the third stage was the strong executive power exerted by the audit of the industrial hygiene program from the US head office. In the fourth step, there was a change to actually reduce noise. The driving force in this stage was a change in company executives' risk perception resulting from lawsuits over noise-induced hearing loss and the task force team activities for culture change based on the action learning protocol. At the fifth stage, a 'buy quiet policy' was institutionalized. The management's experience that noise reduction was difficult was the motivation to manage noise from the time of purchase of equipment. Conclusions: The activities of a hearing conservation program are determined by the improvement of the legal system and by the way it is enforced. Noise control activities to reduce noise areas may be possible through the shared risk perception of noise-induced hearing loss and by a change agent role as a facilitator to implement noise control.

• Journal of Korea Port Economic Association
• /
• v.32 no.1
• /
• pp.79-95
• /
• 2016

This study identifies themes and trends in maritime economics and logistics by examining 303 papers published in international journals from 2000 to 2014 using keyword network analysis. Network analysis can be used because the collected data follow Zipf's law and the power law. Utilizing the degree centrality and betweenness centrality, we find the important keywords in each five year period and determine the importance of shared keywords. To further explain keyword centralities, we invented a Delta-C algorithm to show the trends of keywords over time. We found that degree centrality is useful for identifying important research themes in each period because it is mainly concerned with the number of connections. On the other hands, betweenness centrality is useful to determine the unique themes that emerge in each of the specific periods.

• Journal of Korean Theatre Studies Association
• /
• no.48
• /
• pp.5-50
• /
• 2012

In these days, we come across a growing interest in animals from various perspectives. Considering that the posthumanistic point of view forms the major stream of postmodern humanities, ethics and philosophies, this paper tries to study the liminality between human beings and animal as appear in postmodern plays. The cases of a middle-aged architect falling in love with a goat (The Goat, or Who is Sylvia? by Edward Albee); An abandoned (human-)dog that encounters his old mistress under the moonlight (A leaseholder by Yoon Young-sun); Coexistence of men, dog, plants in a Country life (White Cherry by Bae Sam-sik); A Mutual sympathy between a swarm of bees and a woman dying of cancer(Bee by Bae Sam-sik) were discussed referring such concepts as 'Otherness' of Derrida, 'Becoming'of Deleuze, 'a bare life' of Agamben and ecological co-existence. In The Goat, the moment of Martin who happened to meet a goat's eyes in a suburbs can be paralleled with that of Derrida who one day found himself caught up with the gaze of a cat in the bathroom while he was naked. They shared the common experience in that they went through the ontological and mysterious abyss that rendered them to raise the question of "Who am I ?" In A leaseholder, a young woman returns to her hometown exhausted by the calculating human society and meet her old time (human-dog). This story reminds us of Agamben's werewolf, Levinas's dog Bobby and Derrida's Zootobiography. He, an abandoned pet, both excluded and included from human society, now appearing as a mysterious human-dog, welcomes, embraces, and comprehends his old mistress and exposes his individual remorses and passions as an animal-subject. In White Cherry, the author describes the coexistence of all the life-beings such as an old dog, a golden bell tree, the deceased daughter and even a fossil remains in a country life. Bee is a story of a beekeeping village where bees were leaving and disappearing. A swam of bees fly down on a woman who was dying of cancer. With physical and spiritual empathy the dying woman helps the swarm of bee to conduct a new birth and a new life.

• Cross-Cultural Studies
• /
• v.53
• /
• pp.193-218
• /
• 2018

In this essay, I examine the interactions of chronotopes in the narrative of Gangnam Blues, a film written and directed by Yu Ha and released in 2015. Bakhtin's chronotope, the connectedness of temporal and spatial relationships in literary narratives, provides the background for the representability of events and becomes the organizing center for the events. Each chronotope offers a different way of acting, interacting and understanding experience, and chronotopes can interact with each other in a single text or between the reader and the represented world. Gangnam Blues is a gangster movie, first of all, showing an individual's illusion of an unlimited possibility for achieving wealth and power. At the same time, the film describes the government's project to transform Gangam, a rural area in the south of the Han, into a new downtown and residential area for Seoul. As the world in the narrative and the world of the author or the reader are all chronotopic, we can see the interactions of chronotopes between the narrative of an individual and the historical narrative, as well as between the narrative about the beginning of Gangnam and the audience's perception of the present Gangnam. In this film, the main character's ambition is shown as part of the social desire for rapid economic achievements in the 1970s, along with high social mobility. The social desire can be explained as envy, as it is fueled by social comparisons and competitions. The main character's pursuit of money and power through the possession of Gangnam land overlaps with the envious desire for the present Gangnam shared by many. The individual's exceptional ambition and violence are not fully examined in this text. Moreover, the film's dependence on the feelings of envy to represent the individual's choice and violence can be a symptom of the lack of critical distance from social desire and envy.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.466-477
• /
• 2018

Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.