• 제목/요약/키워드: shared band

검색결과 66건 처리시간 0.03초

SUCCESS 네트워크 구조에서의 WDM-PON을 위한 스케줄링 알고리즘 (Scheduling Algorithm for WDM-PON in SUCCESS Network Architecture)

  • 김현숙
    • 한국통신학회논문지
    • /
    • 제30권7B호
    • /
    • pp.427-432
    • /
    • 2005
  • 광대역 멀티미디어의 고품질 서비스를 제공하기 위한 가입자 전송 망 분야의 변화가 요구 되고 있는 요즘, PON에 대한 연구가 이를 실현시키기 위한 방안으로 크게 부각되고 있다. 본 논문에서는 SUCCESS(Stanford University aCCESS : next generation hybrid WDM/TDM optical access network architecture) 구조에서의 WDM-PON을 위한 스케줄링 알고리즘을 제안하고자 한다. 경제적 구현을 실현하기 위해서는 공유되는 자원의 보다 효율적인 할당이 필요하며, 이를 위해 SUCCESS의 구조와 특성에 적절한 효율적인 스케줄링 알고리즘을 제안하고 있으며, 전체 시스템에서의 평균 패킷 지연시간 및 처리량에 대한 성능을 평가, 분석한다.

Design of a bluetooth-based interactive control network

  • Kwak, Jae-Hyuk;Lim, Joon-Hong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.922-925
    • /
    • 2004
  • Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

  • PDF

이동 시스템 제어를 위한 블루투스 네트워크 (Bluetooth Network for Mobile System Control)

  • 임준홍;곽재혁
    • 제어로봇시스템학회논문지
    • /
    • 제10권11호
    • /
    • pp.1052-1057
    • /
    • 2004
  • Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

DNA Fingerprinting of Red Jungle Fowl, Village Chicken and Broilers

  • Mohd-Azmi, M.L.;Ali, A.S.;Kheng, W.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권8호
    • /
    • pp.1040-1043
    • /
    • 2000
  • The genomic mapping of Red Jungle Fowl (Gallus gallus), local Village Chicken, and broiler was carried out by random amplified polymorphism DNA (RAPD) technique. Two different sets of arbitrary primers were used (Operon OPA01-20 and Genemed GM01-50). All the genomes of the three species of chickens were amplified with OPA01-20 primers. The genomes of the Red Jungle Fowl and local Village Chicken were further amplified with GM01-50 primers. Analysis of the results based on band sharing (BS) and the molecular size of individually amplified DNA fragments showed that Red Jungle Fowl and local Village Chicken shared the species similarity of 66% with Operon primers 01-20, 64% between local Village Chicken and broiler, and 63% when DNA bands between Red Jungle Fowl and broiler were compared. With GM01-50, the BS between Red Jungle Fowl and local village chicken increased to 72%. The results showed that the local village chicken is more closely related to Red Jungle Fowl than to broiler in the genetic distance. On the other hand, broiler is 1% closer in genetic distance to local village chicken than to Red Jungle Fowl. The results also indicated that primers like OPA-7, 8 and 9 can be used as species specific DNA markers for these three species of chickens.

Genetic Distances between Two Echiuran Populations Discriminated by PCR

  • Yoon, Jong-Man
    • 한국발생생물학회지:발생과생식
    • /
    • 제23권4호
    • /
    • pp.377-384
    • /
    • 2019
  • Genomic DNA extracted from representatives of two populations, Gunsan and Chinese, of Urechis spp. was amplified using PCR with several primers. The band-sharing (BS) value between individuals no. 05 from the Gunsan population and no. 22 from the Chinese population was 0.206, which was the lowest recognized value. Oligonucleotides primer OPC-04 revealed 44 unique loci, which distinguished the Chinese population. Primer OPB-17 allowed the discovery of 22 loci shared by the two populations, which were present in all samples. Based on the average BS results, individuals from the Gunsan population demonstrated lower BS values (0.661±0.012) than did those from the Chinese population (0.788±0.014; p<0.05). The shortest genetic distance (GD) displaying a noteworthy molecular difference was between individuals CHINESE no. 12 and no. 13 (GD=0.027). Individual no. 06 from the Gunsan population was most distantly related to CHINESE no. 22 (GD=0.703). A group tree of the two populations was constructed by UPGMA Euclidean GD analysis based on a total of 543 fragments generated using six primers. The explicit markers recognized in this study will be used for genetic analysis, as well as to evaluate the species security and proliferation of echiuran individuals in intertidal regions of the Korean Peninsula.

고정된 MIMO 환경에서의 최적의 직교 오버레이 시스템 설계 (An Optimal Orthogonal Overlay for Fixed MIMO Wireless Link)

  • 윤여훈;조준호
    • 한국통신학회논문지
    • /
    • 제34권10C호
    • /
    • pp.929-936
    • /
    • 2009
  • 기존의 MIMO 다중 송수신기들이 협대역 flat 채널을 공유하고 있는 환경에서 오버레이 MIMO 시스템의 디자인을 고려한다. 오버레이 시스템의 수신기로 수신되는 기존 시스템 신호의 2nd-order 통계량과 오버레이 송신단으로부터 기존 시스템들의 수신단 사이의 채널이 모두 알려져 있다고 가정한다. 평균 송신 전력 제약과 이미 관심대역을 차지하고 있는 기존 시스템들의 수신단에 간섭을 일으키지 않는다는 제약 아래 오버레이 시스템의 각 수신안테나 출력에서의 데이터 심볼의 평균 제곱 오차 (MSE: mean-squared error)의 합인 전체 MSE를 최소화 하는 최적 오버레이 시스템의 선형 precoding과 decoding 행렬을 유도한다. 최적 해가 존재하기 위한 필요충분 조건 또한 유도하고, 제안된 시스템의 성능에 대한 모의 실험 결과를 제공한다.

SDN에서 데이터 평면 장애를 해결하는 빠른 우회 기법 (Faster Detouring for Data Plane Failures in Software Defined Networks)

  • ;염상길;추현승
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2016년도 춘계학술발표대회
    • /
    • pp.124-126
    • /
    • 2016
  • Successful deployment of the Software Defined Network (SDN) depends on its ability to cope up with network failures. There are various types of failures that may occur in an SDN. The most common are switch and link failures. It is necessary to recover the network from failures for a continuous service availability. But for the real-time services fast recovery from the failure is required to minimize the service disruption time. In the proposed work, we focused on minimizing the recovery time after the failure is detected. Once the failure is detected, the controller involvement is needed to dynamically reroute the failure disrupted flows from the failed component to an alternate path. The aim of the proposed scheme is to provide a traffic management scheme which can react to the dynamic network events by rapidly modifying the forwarding behavior of the switches for faster in-band network adaptability. The proposed scheme (1) Considers the shared data and control path delay (2) Optimally utilize the network resources (3) Eliminates the need of constant monitoring overhead at the controller which results into faster detouring and ultimately rapid recovery.

고속 이앙기의 유압 수평 제어 장치 개발에 관한 연구 (Development of a Hydraulic Level Control System for High-speed Rice Transplanting Machines)

  • 정연근;정병학;김경욱
    • Journal of Biosystems Engineering
    • /
    • 제27권2호
    • /
    • pp.79-88
    • /
    • 2002
  • This study was conducted to develop system for high speed rice transplanting machines. The control system includes a sensor detecting the tilt angle of the seedling bed, a micro-controller and a hydraulic system consisting of a double acting cylinder, a four-way three-position solenoid valve, a relief valve and a hydraulic pump. The levelling system shared the pump with the existing steering control, resulting in a tandem center circuit for the steering and levelling control systems. Using the input signal from the sensor, the micro-controller determined and generated the output signal to control the cylinder through the solenoid valve to keep the seedling bed always parallel to the water surface regardless of soil unevenness during the transplanting operations. Both an ON/OFF and a PWM control schemes were tested. When the flow rate was more than 1 ι/min in the ON/OFF control, the system showed unstable rolling. However, in the PWM control, the system worked stably although the flow rate was more than 1 ι/min. The PWM control showed a better performance when a large difference between the angle and the dead band of the control system occurred. The characteristics of tile system response to given tilt angles were predicted by a computer simulation. Both the ON/OFF and the PWM control systems worked well providing that the operating and waiting times were properly adjusted.

Design, Analysis, and Equivalent Circuit Modeling of Dual Band PIFA Using a Stub for Performance Enhancement

  • Yousaf, Jawad;Jung, Hojin;Kim, Kwangho;Nah, Wansoo
    • Journal of electromagnetic engineering and science
    • /
    • 제16권3호
    • /
    • pp.169-181
    • /
    • 2016
  • This work presents a new method for enhancing the performance of a dual band Planer Inverted-F Antenna (PIFA) and its lumped equivalent circuit formulation. The performance of a PIFA in terms of return loss, bandwidth, gain, and efficiency is improved with the addition of the proposed open stub in the radiating element of the PIFA without disturbing the operating resonance frequencies of the antenna. In specific cases, various simulated and fabricated PIFA models illustrate that the return loss, bandwidth, gain, and efficiency values of antennas with longer optimum open stub lengths can be enhanced up to 4.6 dB, 17%, 1.8 dBi, and 12.4% respectively, when compared with models that do not have open stubs. The proposed open stub is small and does not interfere with the surrounding active modules; therefore, this method is extremely attractive from a practical implementation point of view. The second presented work is a simple procedure for the development of a lumped equivalent circuit model of a dual band PIFA using the rational approximation of its frequency domain response. In this method, the PIFA's measured frequency response is approximated to a rational function using a vector fitting technique and then electrical circuit parameters are extracted from it. The measured results show good agreement with the electrical circuit results. A correlation study between circuit elements and physical open stub lengths in various antenna models is also discussed in detail; this information could be useful for the enhancement of the performance of a PIFA as well as for its systematic design. The computed radiated power obtained using the electrical model is in agreement with the radiated power results obtained through the full wave electromagnetic simulations of the antenna models. The presented approach offers the advantage of saving computation time for full wave EM simulations. In addition, the electrical circuit depicting almost perfect characteristics for return loss and radiated power can be shared with antenna users without sharing the actual antenna structure in cases involving confidentiality limitations.

고려인삼 신품종 '천량' 특이적 DNA 판별 마커 개발 (A Rapid Identification of Korean Ginseng Cultivar, Cheonryang, using Specific DNA Markers)

  • 조익현;김영창;김장욱;이승호;임지영;문지영;노봉수;현동윤;김동휘;김기홍;방경환
    • 한국약용작물학회지
    • /
    • 제22권6호
    • /
    • pp.429-434
    • /
    • 2014
  • This study describes the efficient method for the discrimination of 'Cheonryang' in Panax ginseng Meyer using a STS primer. A total of 208 STS primers were applied to polymerase chain reaction (PCR) amplification for discriminating Korean ginseng cultivars. Co-dominant polymorphic band patterns were generated with two primers, MFGp 0019, MFGp 0248, and successful identification of 'Cheonryang' was achieved from out of 11 Korean ginseng cultivars. Two different sizes of DNA band patterns were detected with MFGp 0019 primer. Ten Korean ginseng cultivars shared the same size of amplified DNAs (389 bp), but 'Cheonryang' showed a different size. Thus 'Cheonryang' can be efficiently distinguished from the other ten ginseng cultivars by using the MFGp 0019 primer. In the case of MFGp 0248, two different sizes of DNA band patterns were detected in the eleven ginseng cultivars. Same sized amplified DNA bands (307 bp) were shown in five cultivars (Chunpoong, Gopoong, Kumpoong, Cheongsun, Sunhyang) and 254 bp sized DNA bands were identified in the other 6 cultivars (Yunpoong, Sunpoong, Sunun, Sunone, Cheonryang, K-1). In conclusion, the two STS primers, MFGp 0019, and MFGp 0248, provide a rapid and reliable method for the specific identification of 'Cheonryang' cultivar from a large number of samples.