• Korean Journal of Radiology
• /
• v.22 no.11
• /
• pp.1777-1785
• /
• 2021

Objective: To investigate the accuracy of the Agatston score obtained with the ultra-high-pitch (UHP) acquisition mode using tin-filter spectral shaping (Sn150 kVp) and a kVp-independent reconstruction algorithm to reduce the radiation dose. Materials and Methods: This prospective study included 114 patients (mean ± standard deviation, 60.3 ± 9.8 years; 74 male) who underwent a standard 120 kVp scan and an additional UHP Sn150 kVp scan for coronary artery calcification scoring (CACS). These two datasets were reconstructed using a standard reconstruction algorithm (120 kVp + Qr36d, protocol A; Sn150 kVp + Qr36d, protocol B). In addition, the Sn150 kVp dataset was reconstructed using a kVp-independent reconstruction algorithm (Sn150 kVp + Sa36d, protocol C). The Agatston scores for protocols A and B, as well as protocols A and C, were compared. The agreement between the scores was assessed using the intraclass correlation coefficient (ICC) and the Bland-Altman plot. The radiation doses for the 120 kVp and UHP Sn150 kVp acquisition modes were also compared. Results: No significant difference was observed in the Agatston score for protocols A (median, 63.05; interquartile range [IQR], 0-232.28) and C (median, 60.25; IQR, 0-195.20) (p = 0.060). The mean difference in the Agatston score for protocols A and C was relatively small (-7.82) and with the limits of agreement from -65.20 to 49.56 (ICC = 0.997). The Agatston score for protocol B (median, 34.85; IQR, 0-120.73) was significantly underestimated compared with that for protocol A (p < 0.001). The UHP Sn150 kVp mode facilitated an effective radiation dose reduction by approximately 30% (0.58 vs. 0.82 mSv, p < 0.001) from that associated with the standard 120 kVp mode. Conclusion: The Agatston scores for CACS with the UHP Sn150 kVp mode with a kVp-independent reconstruction algorithm and the standard 120 kVp demonstrated excellent agreement with a small mean difference and narrow agreement limits. The UHP Sn150 kVp mode allowed a significant reduction in the radiation dose.

• Management & Information Systems Review
• /
• v.3
• /
• pp.287-316
• /
• 1999

Cyberspace permits us to more beyond traditional face-to-face, mail and telephone surveys, yet still to examine basic issues regarding the quality of data collection: sampling, questionnaire design, survey distribution, means of response, and database creation. This article address each of these issues by contrasting and comparing traditional survey methods(Paper-and-Pencil) with Internet or Personal Computer networks-mediated (Screen-and-Keyboard) survey methods also introduces researchers to this revolutionary and innovative tool and outlines a variety of practical methods for using the Internet or Personal Computer Networks. The revolution in telecommunications technology has fostered the rapid growth of the Internet all over the world. The Internet is a massive global network and comprising many national and international networks of interconnected computers. The Internet or Personal Computer Networks could be the comprehensive interactive tool that will facilitate the development of the skills. The Internet or Personal Computer Networks provides a virtual frontier to expand our access to information and to increase our knowledge and understanding of public opinion, political behavior, social trends and lifestyles through survey research. Comparable to other technological advancements, the Internet or Personal Computer Networks presents opportunities that will impact significantly on the process and quality of survey research now and in the twenty-first century. There are trade-offs between traditional and the Internet or Personal Computer Networks survey. The Internet or Personal Computer Networks is an important channel for obtaining information for target participants. The cost savings in time, efforts, and material were substantial. The use of the Internet or Personal Computer Networks survey tool will increase the quality of research environment. There are several limitations to the Internet or Personal Computer Network survey approach. It requires the researcher to be familiar with Internet navigation and E-mail, it is essential for this process. The use of Listserv and Newsgroup result in a biased sample of the population of corporate trainers. However, it is this group that participates in technology and is in the fore front of shaping the new organizations of interest, and therefore it consists of appropriate participants. If this survey method becomes popular and is too frequently used, potential respondents may become as annoyed with E-mail as the sometimes are with mail survey and junk mail. Being a member of the Listserv of Newsgroup may moderate that reaction. There is a need to determine efficient, effective ways for the researcher to strip identifiers from E-mail, so that respondents remain anonymous, while simultaneously blocking a respondent from responding to a particular survey instrument more than once. The optimum process would be on that is initiated by the researcher : simple, fast and inexpensive to administer and has credibility with respondents. This would protect the legitimacy of the sample and anonymity. Creating attractive Internet or Personal Computer Networks survey formats that build on the strengths of standardized structures but also capitalize on the dynamic and interactive capability of the medium. Without such innovations in survey design, it is difficult to imagine why potential survey respondents would use their time to answer questions. More must be done to create diverse and exciting ways of building an credibility between respondents and researchers on the Internet or Personal Computer Networks. We believe that the future of much exciting research is based in the Electronic survey research. The ability to communicate across distance, time, and national boundaries offers great possibilities for studying the ways in which technology and technological discourse are shaped. used, and disseminated ; the many recent doctoral dissertations that treat some aspect of electronic survey research testify to the increase focus on the Internet or Personal Computer Networks. Thus, scholars should begin a serious conversation about the methodological issues of conducting research In cyberspace. Of all the disciplines, Internet or Personal Computer Networks, emphasis on the relationship between technology and human communication, should take the lead in considering research in the cyberspace.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.113-120
• /
• 2014

This study will evaluate the effectiveness of various pretreatments when fiber-reinforced composite (FRC) post is bonded to endodontically treated tooth with resin cement. Materials and methods: Canal shaping of FRC post (DT Light post, Size 3, Bisco Inc., Schaumburg, IL, USA) was performed on endodontically treated premolars at 1.5 cm from CEJ. Samples were divided into 6 groups of surface treatment after conventional washing and drying to the canal. Total of 24 FRC posts were randomly divided into 6 groups of surface treatment as follows: Group C: control - no surface treatment, Group A: airborne-particle abrasion (Cojet sand, 3M ESPE), Group S: silanization (Bis-silane, Bisco Inc.), Group M: universal primer (Monobond-plus primer, Ivoclar Vivadent Inc.), Group AS: silanization after airborne-particle abrasion, Group AM: universal primer treatment after airborne-particle abrasion. Pretreated fiber posts were cemented with resin-based luting material and photo-polymerized and cut to the thickness of 1 mm. Push-out test using a universal testing machine was performed. Bonding failure strength of post dislodgement was measured and the type of bonding failure was classified. Data were analyzed with Kruskal-Wallis test and multiple comparison groups were performed using Tukey HSD value of rank test (${\alpha}=0.05$). Results: Group AS showed significantly highest bonding strength. Group S, group AM, group A, and group M showed lower bonding strength in order. The control group showed the lowest bonding strength. Conclusion: Surface treatment with silane showed to be the most effective of the surface pretreatment methods for cementation of FRC post. Surface treatment with universal primer showed no significant difference compared with no surface treatment group as for bonding strength.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2255-2265
• /
• 2013

This study presents the width function-based Clark model. To this end, rescaled width function with distinction between hillslope and channel velocity is used as time-area curve and then it is routed through linear storage within the framework of not finite difference scheme used in original Clark model but analytical expression of linear storage routing. There are three parameters focused in this study: storage coefficient, hillslope velocity and channel velocity. SCE-UA, one of the popular global optimization methods, is applied to estimate them. The shapes of resulting IUHs from this study are evaluated in terms of the three statistical moments of hydrologic response functions: mean, variance and the third moment about the center of IUH. The correlation coefficients to the three statistical moments simulated in this study against these of observed hydrographs were estimated at 0.995 for the mean, 0.993 for the variance and 0.983 for the third moment about the center of IUH. The shape of resulting IUHs from this study give rise to satisfactory simulation results in terms of the mean and variance. But the third moment about the center of IUH tend to be overestimated. Clark model proposed in this study is superior to the one only taking into account mean and variance of IUH with respect to skewness, peak discharge and peak time of runoff hydrograph. From this result it is confirmed that the method suggested in this study is useful tool to reflect the heterogeneity of drainage path and hydrodynamic parameters. The variation of statistical moments of IUH are mainly influenced by storage coefficient and in turn the effect of channel velocity is greater than the one of hillslope velocity. Therefore storage coefficient and channel velocity are the crucial factors in shaping the form of IUH and should be considered carefully to apply Clark model proposed in this study.

• Radiation Oncology Journal
• /
• v.14 no.1
• /
• pp.77-85
• /
• 1996

Purpose : Multileaf collimator(MLC) is very suitable tool for conformal radio-therapy and commissioning measurements for a multileaf collimator installed on a dual energy accelerator with 6 and 10MV photons are required, For modeling the collimator with treament planning software, detailed dosimetric characterization of the multileaf collimator including the penumbra width, leaf transmission between leaf leakage and localization of the leaf ends and sides is an essential requirement. materials and Methods : Measurement of characteristic data of the MLC with 26 pair block leaves installed on CLINAC 2100C linear accelerator was performed. Low sensitive radiographic film(X-omatV) was used for the penumbra measurement and separate experiments using radiographic film and thermoluminescent dosimeters were performed to verify the dose distribution, Measured films were analized with a photodensitometer of WP700i scanner. Results : For 6 & 10 MV x-ray energies, approximately $2.0\%$ of photons incident on the multileaf collimator were transmitted and an additional $0.5\%$ leakage occurs between the leaves. Localizing the physical end of the leaves showed less than 1mm deviation from the $50\%$ decrement line and this difference is attributed to the curved shaped end on the leaves One side of a sin히e leaf corresponded to the $50\%$ decrement line, but the opposite face was aligned with a lower value. This difference is due to the tongue and groove used to decrease between leaf leakage. Alignment of the leaves to form a straight edge resulted larger penumbra at far position from isocenter as compare with divergent alloy blocks. When the MLC edge is stepped by sloping field, the isodose lines follow the leaf pattern and Produce scalloping isodose curves in tissue. The effective penumbra by 45 degree stepped MLC is about 10mm at 10cm depth for 6MV x-ray. The difference of effective penumbra in deep tissue between MLC and divergent alloy blocks is small (5mm). Conclusion : Using the characteristic data of MLC, the MLC has the clinlical acceptability and suitability for 3-D conformal radiotherapy except small field size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.62-75
• /
• 2007

This paper describes a shaped-beam antenna for increasing the antenna gain of a radiating element. The proposed antenna structure is composed of an exciting element and a multi-layered disk array structure(MDAS). The stack micro-strip patch elements were used as the exciter for effectively radiating the electromagnetic power to the MDAS over the broadband, and finite metallic disk array elements - which give the role of a director for shaping the antenna beam with the high gain - were finitely and periodically layered onto it. The efficient power coupling between the exciter and the MDAS should be carried out in such a way that the proposed antenna has a high gain characteristic. The design parameters of the exciter and the MDAS should be optimized together to meet the required specifications to meet the required specifications. In this study, a shaped-beam antenna with high gain was optimally designed under the operating conditions with a linear polarization and the frequency band of $9.6{\sim}10.4\;GHz$. Two methods constructed using thin dielectric film and dielectric foam materials respectively were also proposed in order to implement the MBAS of the antenna. In particular, through the computer simulation process, the electrical performance variations of the antenna with the MDAS realized by the thin dielectric film materials were shown according to the number of disk array elements in the stack layer. Two kinds of antenna breadboard with the MDAS realized with the thin dielectric film and dielectric foam materials were fabricated, but experimentation was conducted only on the antenna breadboard(Type 1) with the MDAS realized with the thin dielectric film materials according to the number of disk array elements in the stack layer in order to compare it with the electrical performance variations obtained during the simulation. The measured antenna gain performance was found to be in good agreement with the simulated one, and showed the periodicity of the antenna gain variations according to the stack layer number of the disk array elements. The electrical performance of the Type 1 antenna was measured at the center frequency of 10 GHz. As the disk away elements became the ten stacks, a maximum antenna gain of 15.65 dBi was obtained, and the measured return loss was not less than 11.4 dB within the operating band. Therefore, a 5 dB gain improvement of the Type 1 antenna can be obtained by the MDAS that is excited by the stack microstrip patch elements. As the disk array elements became the twelve stacks, the antenna gain of the Type 1 was measured to be 1.35 dB more than the antenna gain of the Type 2 by the outer dielectric ring effect, and the 3 dB beam widths measured from the two antenna breadboards were about $28^{\circ}$ and $36^{\circ}$ respectively.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.380-386
• /
• 2010

Objectives: The introduction of nickel-titanium alloy endodontic instruments has greatly simplified shaping the root canal systems. However, these new instruments have several unexpected disadvantages. One of these is tendency to screw into the canal. In this study, the influence of taper on the screw-in effect of the Ni-Ti rotary instrument were evaluated. Materials and Methods: A total of 20 simulated root canals with an S-shaped curvature in clear resin blocks were divided into two groups. ProFile .02, .04, .06 (Dentsply-Maillefer) and GT rotary files .08, .10, .12 (Dentsply) were used in Profile group, and K3 .04, .06, .08, .10, and .12 (SybronEndo, Glendora) were used in K3 group. Files were used with a single pecking motion at a constant speed of 300 rpm. A special device was made to measure the force of screw-in effect. A dynamometer of the device recorded the screwin force during simulated canal preparation and the recorded data was stored in computer with designed software. The data were subjected to one-way ANOVA and Tukey's multiple range test for post-hoc test. p value of less than 0.05 was regarded significant. Results: The more tapered instruments generated more screw-in forces in Profile group (p < 0.05). In K3 group, 0.08, 0.10. and 0.12 tapered instruments showed more screw-in force than 0.04 tapered one, and 0.08 and 0.12 tapered instruments showed more screw-in force than 0.06 tapered one (p < 0.05). Conclusions: The more tapered instruments seems to produce more screw-in force. To avoid this screw-in force during instrumentation, more attention may be needed when using more tapered instruments.

• Korea Science and Art Forum
• /
• v.19
• /
• pp.293-305
• /
• 2015

At the same time the unique cultural traits of each country are valued, it has become an essential element to establish the cultural identity of a country. This study is aimed at comparing the residence architectural cultures in East-Asia and thus identifying Korea's own unique traits by determining the application characteristics of traditional architectures of Korea, China and Japan through practical investigation of materials, a basic element of architectural shaping. Literature survey and field study were conducted in parallel for this study, and architectural buildings under investigation included Mucheomdang House in Korea, Prince Gong Mansion in China and Dokyudo Building in Japan. Construction materials in Korea, China and Japan include natural materials such as wood, stone and clay, and artificial materials such as metals, paper, roof tiles, plug and glass. and the buildings were constructed with the combination of these materials. This commonality can be often found in the architectural composition. However, in the interior composition, the choice and application of different materials were clear between three countries, which were shown to be different depending on climates, processing methods and living culture of each country. First of all, since each country selected materials under the influence of its own vegetation and climates, living environment of each country could be seen via its residence. Also, it could be seen that while Korea and Japan show a certain similarity such as the traits of standing-sitting culture and the finish of paper in the interior, China is clearly different. In particular, regarding the material processing, the artificial processing was minimized in Korea, which mainly gave rough and crude feelings while due to the use of straight timbers, the architectural representation with organized and refined feelings was made in Japan. China showed the highest percentage of artificial processing of materials among three countries, which was highly associated with the coloring culture of China. Also, it could be seen that technology related to fine architectural materials such as bricks and glass was greatly advanced in China. Thus, how immaterial elements such as natural characteristics, functionality and aesthetics were applied in relation to residence in Korea, Japan and China could be determined through the comparison of architectural materials.