• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.434-437
• /
• 1996

Symmetry is one of the important structural properties of shapes both in perceptual psychology and in computer vision. Recently, a number of automatic symmetry finding algorithms have been reported. Among them, the algorithm based on the use of principal axes of objects is the most general and practical. It is, however, of no use when shapes concerned have some asymmetry. Asymmetric shapes which make us associate with certain kinds of symmetry are practically important and they are called shapes with potential symmetry in this paper. The algorithm we have already proposed can cope with those shapes having potential axial symmetry. The algorithm employs a reflected image of the original and a certain evaluation function. In the former paper, areal minimization was employed for the evaluation function and it yielded satisfactory experimental results. However, it could not cope with those shapes which have larger asymmetry. In this paper, we propose the employment of variance as an alternative evaluation index with respect to the difference image between the reflected and the original shape. The technique is examined its performance by real video images as well as synthetic data. Experimental results are shown and discussion is given.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.341-351
• /
• 2016

In this present work, the effect of hole shapes, orientation and hole arrangements on film cooling effectiveness has been carried out. For this work a flat plate has been considered for the computational model. Computational analysis of film cooling effectiveness using different hole shapes with no streamwise inclination has been carried out. Initially, the model with an inclination of $30^{\circ}$ has been verified with the experimental data. The validation results are well in agreement with the results taken from literature. Five different hole shapes viz. Cylindrical, Elliptic, Triangular, Semi-Cylindrical and Semi-Elliptic have been compared and validated over a wide range of blowing ratios. The blowing ratios ranged from 0.67 to 1.67. Later, orientation of holes have also been varied along with the number of rows and hole arrangements in rows. The performance of film cooling scheme has been given in terms of centerline and laterally averaged adiabatic effectiveness. Semi-elliptic hole utilizes half of the mass flow as in other hole shapes and gives nominal values of effectiveness. The triangular hole geometry shows higher values of effectiveness than other hole geometries. But when compared on the basis of effectiveness and coolant mass consumption, Semi-elliptic hole came out to give best results.

• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.209-213
• /
• 2006

The 3-D information is useful as basic data which has been utilized in the development of simulating technology as fit-simulation. The experiment is designed to take some useful data on the variant shapes which contribute in simulating the adaptability of the clothes. The general figure of the clothes are made after the figure of the basic standing posture of the human body. The shape of the clothes fits with kinetic characteristic of the human body as the form of the clothes gets twisted, the ease of the clothes changes, and the clothes itself expands. We studied the dressed shapes of blouse according to two types of the arm movement(basic posture and reach forward) and three types of clothes(foundation, blouse with short sleeves and sleeveless) in the sit-down-posture. We accomplished some experimental data on three-dimensional measurement of the dressing shapes using TDS-3100 3-D scanner made in Japan PULSTECH. It is considered that the variant of shapes and distribution of gaps in the dressed shapes of blouse are determined by the adaptability of clothes made in arm movement.

• 복식문화연구
• /
• 제13권1호
• /
• pp.6-17
• /
• 2005

The purpose of this research is to define low body shapes of Plus-sized women at ages between 21 and 69 whose satisfied the Plus-sized judgment criteria took part in this study. This research also classifies different body types, and provides basic data for designing skirt's and slacks' prototypes according to each body type. Based on factor analysis of the measured data, seven key factors are grouped. And four different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall in stature and balanced. This body type is characterized by trapezoid body shape when looked from the front, and slim the abdomen, bulge the belly and flat the buttocks when looked from the side. Type 2 refers to short and an obese body shapes, with trapezoid front and bulge abdomen and belly and flat the buttocks. Type 3 refers to those who are of medium height and long-legged body shapes, with rectangular front, protruding belly and buttocks. Type 4 refers to obese body shapes, with rectangular front, protruding abdomen and belly, flat the buttocks. 9 items are available to judge Plus-sized women's low body types and the hit ratio is 93.5%.

• 감성과학
• /
• 제9권2호
• /
• pp.101-109
• /
• 2006

판매원이 소비자의 얼굴외모를 보고 구매 선호도를 판단할 수 있다면 이에 대응하는 판매전략을 수립할 수 있을 것이다. 이를 위한 선결과제는 얼굴외모에 따라 구매 선호도의 차이를 밝히는 것이다. 따라서 본 연구의 목적은 눈썹유형별로 의복 구매 선호도의 차이를 분석하는 것이다. 관상학적인 방법으로 눈썹유형을 다섯 가지로 분류하고, 눈썹유형에 따라 의복 구매 선호도의 차이를 분석하였다. 분석결과, 눈썹 끝이 처진 사람들은 눈썹 끝이 오른 사람들에 비하여 평범한 이미지, 단순한 이미지, 점잖은 이미지, 얌전한 이미지의 의복을 더 선호하는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1286-1291
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLS) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spital shapes of identical line width, gap and margin. SFCLS were fabricated from YBCO thin films grown on two-inch diameter Al$_2$O$_3$ substrates under the same conditions. The total length of current limiting paths was the shortest at the spital shape due to its larger useless space. Inductance component of SFCLs with the spiral shape was around two times as high as those of other two shapes. This is not desirable since impedance characteristics of existing power systems can be changed. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, hi-spital shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.29-45
• /
• 1997

This study aims at designing sleeves which are suitable for arm shapes and arm movements. With the samples of of ordinary 24 women aged from 20 to 22, the arm shapes and movements were measured 3-dimensionally using a motion analyzer and a sonic digitizer, and then clasified into three characteristic types (A, B, and C). Our analysis leads to the following conclusion. The factors classifying arm shapes are the length from acromion to posterior armpit point, arm hole length, the cap height, difference in height between anterior and posterior armpit points, armhole circumference, upper arm circumferemce, armhole depth, and underarm circumference. The characteristics of arm type A is that the armhole depth and the length from acromion to posterior armpit point are the largest, while the circumference inbe- tween upper arm and elbow is the smallest among the three arm types. Thus, the large circumference difference between upper and lower arms is the most notable in arm type A. The factors classifying arm shapes for arm type B are the smallest except for the circumference inbetween upper arm and elbow which is larger than that for arm type A. The circumference difference betweemn upper and lower arms is small for arm type B. Arm type C has the smallest armhole depth, while other factors are similar to those for arm type B. In type C, the size of upper arm is comparatively small on the frontal plane, while it is the largest on the sagital plane.

• 한국결정성장학회지
• /
• 제10권2호
• /
• pp.122-127
• /
• 2000

불규칙 입자형성을 갖는 Ce-TZP와 알루미나가 분산된 Ce-TZP 세라믹스를 세라아 도핑조선과 열처리 조건을 변화시켜 제조한 다음, 미세구조를 관찰하였다. 제조된 시편들은 상대밀도가 99% 이상인 고밀도의 소결체였으며, 정방정 및 입방정상 지르코니아 입자로 구성되었다. 도핑하지 않거나 소결만 시킨 시편의 경우 직선적인 입계와 정상적인 입자형성을 나타낸데 비하여 세리아를 침적법으로 도핑한 후 고온으로 열처리한 시편에서는 확산구동 입계이동이 일어나 입계 및 입자형성이 불규칙하였으며. 이러한 Ce-TZP에서는 입자당 평균 입계같이 정상입자에 비하여 크게 증가하였다. 알루미나를 분산시켜 소결한 {{{{ { Al}_{2 }{ O}_{3 } }}}}/Ce- TZP 시편의 경우, 알루미나 입자에 의해서 입성장이 크게 억제되었고, 세리아를 도핑한 후 소결과 열처리를 행한 {{{{ { Al}_{2 }{ O}_{3 } }}}}/Ce-TZP에서는 불규칙 입자형상이 형성되면서도 입성장이 억제되어 입자크기에 비하여 입계면적이 크게 증가하였다. 분산된 알루미나 입자들은 소결과 열처리 과정 중 입자크기가 증가하였고, 열처리 동안 많은 입자들이 입계에서 입내로 위치가 변화하였다. 정상적인 입자형성을 갖은 시편에서는 균열진전시 입계파괴가 주로 일어났으나 불규칙 입자형성을 갖는 시편에서는 주로 입내파괴가 관찰되었다.

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.975-991
• /
• 2014

The objective of this study is to develop a reliable method for locating cracks in a beam using data fusion of fractal dimension features of operating deflection shapes. The Katz's fractal dimension curve of an operating deflection shape is used as a basic feature of damage. Like most available damage features, the Katz's fractal dimension curve has a notable limitation in characterizing damage: it is unresponsive to damage near the nodes of structural deformation responses, e.g., operating deflection shapes. To address this limitation, data fusion of Katz's fractal dimension curves of various operating deflection shapes is used to create a sophisticated fractal damage feature, the 'overall Katz's fractal dimension curve'. This overall Katz's fractal dimension curve has the distinctive capability of overcoming the nodal effect of operating deflection shapes so that it maximizes responsiveness to damage and reliability of damage localization. The method is applied to the detection of damage in numerical and experimental cases of cantilever beams with single/multiple cracks, with high-resolution operating deflection shapes acquired by a scanning laser vibrometer. Results show that the overall Katz's fractal dimension curve can locate single/multiple cracks in beams with significantly improved accuracy and reliability in comparison to the existing method. Data fusion of fractal dimension features of operating deflection shapes provides a viable strategy for identifying damage in beam-type structures, with robustness against node effects.

• 방송공학회논문지
• /
• 제13권6호
• /
• pp.962-965
• /
• 2008

2차원 형상기술자는 형상의 특성을 수치화하여 형상의 분류와 비교를 가능하게 하며, 영상 검색 및 3차원 모델 검색 등에 적용되어왔다. 기존에 개발된 기술자들은 한 형상의 외곽선에 해당하는 폐곡선만을 기술하거나 정밀성이 떨어진다는 한계가 있었다. 이에 따라 본 논문에서는 하나 이상의 폐곡선으로 이루어진 다중형상에 적용하기 위한 다중 곡률-단계 공간 (Multi Curvature-Scale Space) 기술자를 제안한다. 구체적으로, 하나의 폐곡선을 기술하는데 뛰어난 곡률-단계공간 기술자를 각 폐곡선에 적용하고, 이와 함께 전체 형상내의 각 폐곡선들의 배치 형태를 수치화하여 전체 형상을 기술한다. 또한, 기술자를 구성하는 각 값의 가중치를 조절할 수 있게 하여 사용자에 따른 유사도의 모호함을 극복할 수 있게 하였다. 제시하는 다양한 실험 결과는 제안하는 기술자의 유용함을 나타낸다.