1 |
Abbe, A. and Jubran, B. A., "Numerical Modelling of Film Cooling from Converging Slot-hole", Heat Mass Transfer Journal Springer, Vol. 43, No. 4, 2007, pp. 381-388. DOI 10.1007/s00231-006-0115-9
DOI
|
2 |
Bunker, R. S., "A Review of Shaped Hole Turbine Filmcooling Technology," ASME Journal of Heat Transfer, Vol. 127, No. 4, 2005, pp. 441-453.
DOI
|
3 |
Goldstein, R. J., Eckert, E. R. G. and Ramsey, J. W., "Film Cooling with Injection through Holes: Adiabatic Wall Temperatures Downstream of a Circular Hole", Journal of Engineering for Power, Vol. 90, No. 4, 1968, pp. 384-393.
|
4 |
Goldstein, R. J., Film Cooling, Academic Press, Chapter- Advances in Heat Transfer, New York, 1971.
|
5 |
Yuen, C. H. N. and Martinez-Botas, R. F., "Film Cooling Characteristics of a Single Round Hole at Various Streamwise Angles in a Crossflow: Part I Effectiveness", International Journal of Heat and Mass Transfer, Vol. 46, 2003, pp. 221-235.
DOI
|
6 |
Yuen, C. H. N. and Martinez-Botas, R. F., "Film Cooling Characteristics of Rows of Round Holes at Various Streamwise Angles in a Crossflow: Part II. Heat Transfer Coefficient", International. Journal of Heat and Mass Transfer, Vol.46, 2003, pp. 237-249.
DOI
|
7 |
Wang, T. and Li, X., "Mist Film Cooling Simulation at Gas Turbine Operating Conditions", International Journal of Heat and Mass Transfer, Vol. 51, 2008, pp. 5305-5317.
DOI
|
8 |
Li, G., Zhu, H. and Fan, H., "Influence of Hole Shapes on Film Cooling Characteristics with CO2 Injection", Chinese Journal of Aeronautics, Vol. 21, 2008, pp. 393-401.
DOI
|
9 |
Asghar, F. H. and Hyder, M. J., "Computational Study of Film Cooling Effectiveness for a Comparison of Cylindrical, Square and Triangular Holes of Equal Cross-Sectional Area", Mehran University Research Journal of Engineering & Technology, Vol. 29, No. 4, 2010.
|
10 |
Jindal, P., Roy, A. K. and Sharma, R. P., "Numerical Study of Film Cooling For Various Coolant Inlet Geometries", International Journal of Engineering and Technology (IJET), Vol. 7, No. 5, 2015, pp. 1659-1670.
|