혐기성 미생물에 의한 수소 생산에 있어서 기질 농도와 HRT의 영향에 대하여 3계열로 구분하여 실험을 수행하였다. 계열 I는 HRT가 8시간에서 기질농도를 3에서 27 g-glucose/L로 증가시키면서 실험을 수행하였고, 계열 II는 HRT가 16시간, 계열 3은 HRT가 24시간으로 설정하여 실험을 수행하였다. 연구결과, 수소 생성 수율에 미치는 HRT와 기질 농도의 영향에 대하여 표면분석법에 의하여 분석하였다. 최대 수소 생성 수율은 기질농도 15.4 g/L 및 HRT 9.6시간에서 2.05 mol $H_2/mol$ 글루코오스의 값을 구할 수 있었다. 2 mol $H_2/mol$ 글루코오스의 수소 생성 수율을 얻기 위한 기질농도 및 HRT는 각각 $13{\sim}17$ g/L 및 $5{\sim}14$시간임을 알 수 있었다. 글루코오스의 소모에 따라 유기산의 농도는 증가하였고, 주요 대사산물은 아세트산과 부틸산이었다.
근자연형 인공습지에 식재한 부들이 거의 죽지 않고 활착하였으며, 7월부터 새줄기가 일부 나오기 시작하였다. 부들의 활착과 성장은 양호한 편이었다. 개수부에는 부들의 새줄기가 나오지 않았다. 조사기간 인공습지의 평균 $NO_3-N$와 평근 TN 제거율은 각각 85.8 $mg/m^2/day$, 174.4 $mg/m^2/day$를 나타냈다. 북미에서 운영중인 인공습지의 평균$NO_3-N$ 제거율 125 mg $N/m^2/day$와 평균 TN 제거율 513 mg $N/m^2/day$ 보다는 다소 낮다. 이들 북미습지는 조성 후 수년이 지나 습지의 기질층이 $NO_3-N$ 및 TN 제거에 양호한 조건을 갖춘 습지들이다. 본 연구 인공습지의 조사기간이 조성 후 초기이고, 조사기간에 겨울철 일부 기간이 포함되어 있는 점을 고려하면 $NO_3-N$과 TN제거율이 양호한 편이라 사료된다. 본 연구습지의 부들이 2$\sim$3년 후 개수부 이외의 습지를 완전히 덮고, 부들의 잔재물이 습지바닥에 쌓여 탈질화에 필요한 탄소공급원의 역할을 하면 $NO_3-N$ 및 TN 제거율이 높아질 것으로 사료된다. 기존의 인공습지는 수질정화 측면을 강조하여 일정한 수심유지와 유입수의 단기이동 방지를 위해 습지바닥을 수평으로 균일하게 조성하여 왔다. 최근 들어 인공습지 설계에서 친환경적인 측면이 강조되는 추세이다. 본 근자연형 인공습지는 제방에 면한 습지바닥의 일부에 완만한 경사를 두고 습지외곽의 모습을 타원형으로 조성하여 자연습지의 모습과 가급적 유사한 모습으로 조성하였다. 초기 조사분석결과 질소정화가 정상적으로 이루어지고 있어, 습지일부에 완만한 경사를 도입하여 자연습지와 유사한 모습으로 수질정화 인공습지의 조성이 가능할 것으로 사료된다.
작물이 자라는 토양에서 점적 관개에 의해 일어나는 토양 수분의 분포와 이동을 3차원 직교 좌표계로 예측할 수 있는 수학적 모델을 개발하였다. 모델은 지면 증발과 증산을 고려하였으며, 이들의 계절적 현화와 하루 중의 시간변화 뿐 아니라 작물 뿌리의 성장 및 뿌리의 토양 중 분포형태도 고려하였다. 모델의 해는 block centered grid system등을 적용하여 Crank-Nicolson법과 Gauss-Seidel 반복법을 사용하여 구하였다. 모델은 실험을 통해 검증하였으며, 점적 관개의 특성을 알기 위하여 모델을 이용한 컴퓨터 모사를 실시하였고, 본 연구의 조건으로부터 다음의 결과를 얻었다. (1) 관수된 물은 점적기에서 멀어짐에 따라 그 유속이 크게 감소하였고, 관수 시간이 증가함에 따라 습윤구역의 크기가 증가하는 속도도 급격히 감소하였다. (2) 1점 관수의 경우 습윤구역은 수평 방향보다는 수직 방향으로 더 깊이까지 도달하였다. (3) 본 연구조건에서 물이용 효율은 지하 25cm지점의 4점 관수가 가장 좋았으며, 지표면 1점 관수보다 증산량은 10% 증가, 지면 증발량은 20% 감소하였다. (4) disk tension infiltrometer에 의한 토양의 수분보유도 함수는 토양수분 압출에 의한 젖음 곡선과는 상당한 차이를 나타내는 것도 알 수 있었다.
성공적인 총의치를 위해서는 유지, 안정, 지지 세가지 요소가 필수적으로 요구된다. 또한 심한 치조제의 흡수나 수술에 의한 반흔으로 인해 하악 설측변연 형성이 어려운 총의치 제작시에는 무교두 치아배열, 연마면 인상, 무게 보강 내부금속 삽입, 의치 접착 크림의 사용 등의 다양한 고려사항이 필요하다. 본 환자의 경우 심한 치주염으로 심하게 골흡수가 된 무치악 치조제를 가졌고, 또한 설암으로 인한 설절제술로 인해 연조직의 문제를 가진 환자이다. 부가적인 유지와 안정을 얻기 위해 연마면 인상과 내부 보강 금속구조물의 삽입 그리고 최소 가압 인상 등의 방법을 적용하여 보다 나은 임상적 결과를 나타내었다. 또한 원하는 3차원적 형태를 정확하게 부여하고 제작시 복잡한 기공과정을 줄인 금속 구조물을 제작하기 위해 최소 가압 인상 채득과 Direct metal laser sintering이 사용되었다.
나노 입자는 암의 조기 진단과 효과적인 치유를 위한 약물 전달체 또는 영상 조영제로 연구개발 되어왔다. 이러한 나노 입자는 주로 EPR effect로 인해 효과적으로 암 세포를 표적하는 것이 가능하다고 보고되었고, 주로 구형의 나노 입자들이 이러한 실험에 적용되었다. 그러나 최근 EPR effect가 사람의 암 치료에 있어서는 큰 효과를 나타내지 않는다는 한계점이 여러 연구를 통해 제시되고 있다. 따라서 본 연구에서는 이러한 구형 나노 입자의 한계점을 극복하기 위한 새로운 형태의 디스크 나노 입자를 제안하고, 디스크 나노 입자의 생산 과정과 입자의 질을 향상시키기 위한 입자 생산방법에 관한 연구 내용을 보고하였다. 본 연구를 통해 생산된 디스크 나노 입자는 인간 유방암인 MCF7 세포에 적용하여 항암제 전달체로써의 가능성을 평가하였다.
In this study, we will develop a hybrid cross-sectional shape of steel inserted type glued-laminated timber that can improve the strength of structural glued-laminated timber and maximize the ductility by using steel plate with excellent tensile and deformation ability. A total of three specimens were fabricated and the flexural performance test was carried out to evaluate the structural performance of the steel inserted type glued-laminated timber. In order to compare the effect of steel inserted glued-laminated timber, one structural glued-laminated timber test specimen composed of pure wood was manufactured. In addition, in order to evaluate the adhesion performance of the steel inserted, one each of a screw joint test specimen and a polyurethane joint test specimen was prepared. As a result, all the specimens showed the initial crack in the finger joint near the force point. This has been shown to be a cause of crack diffusion and strength degradation. The use of finger joints in the maximum moment section is considered to affect the strength and ductility of the glued-laminated timber beam. Polyurethane-adhesive steel inserted glued-laminated timber showed fully-composite behavior with little horizontal separation between the steel plate and glued-laminated timber until the maximum load was reached. This method has been shown to exhibit sufficient retention bending performance.
Although the radioisotope liver scan has primarily been of use in the detection of the intra-hepatic space occupying lesions, there has been an increasing awareness of its use in evaluation of liver function. In this study, the degree of hepatomegaly, changes in shape and mottling radiodensity on each lobe and splenic visualization in the liver scans done with colloidal radiogold were numerically expressed as scores under the arbitrary standard in 210 patients with liver cirrhosis. The clinical value of this scoring system was studied with special regards to the correlation between the radiogold hepatic uptake half time and conventional liver function tests. Following were the results; 1) The normal scan appeared in 6.7% of 210 patients with liver cirrhosis. 2) The colloidal radiogold hepatic uptake half time was abnormally and progressively prolonged in parallel to severity of hepatocellular dysfunction. The mean hepatic uptake half time in cirrhosis showing normal scan was $2.76{\pm}0.73$ minutes. 3) The scoring system was well correlated with the serum albumin and globulin levels, A/G ratio and BSP retention. There was some correlative tendency in alkaline phosphatase activity. 4) There was no correlation with the thymol turbidity test, cholesterol levels, transaminase activities and bilirubin levels. 5) The spleen was visualized in 38.6% of total patients with liver cirrhosis. Excluding normal scans in liver cirrhosis, the spleen was visualized in 41.3%. 6) The scoring system appears to confirm the clinical diagnosis and to give a reliable estimate of the degree of hepatocellular dysfunction in patients with liver cirrhosis.
Polytrimethylene Terephthalate (PTT) is an eco-fiber with good elastic properties; however, it requires more detailed studies related to spinnability according to blending of various kinds of fibers. The evolution of spinning technology was focused on improved productivity with good quality; in addition, air vortex spinning was recently invented and applied on the spinning factory as the facility with good productivity and quality. More detail spinning technology according to the blending of various kinds of fibers on the air vortex spinning system is required to obtain good quality yarns for high emotional fabrics. In this paper, the physical properties of air vortex, compact and ring staple yarns using PTT/wool/modal blend fibers were investigated with yarn structure to promote high functional PTT that includes fabrics for high emotional garments. Unevenness of air vortex yarns was higher than those of compact and ring yarns; in addition, imperfections were greater than those of compact and ring yarns, which was attributed to a fascinated vortex yarn structure. Tenacity and breaking strain of air vortex yarns were lower than those of compact and ring yarns, caused by higher unevenness and more imperfections of air vortex yarns compared to compact and ring yarns. Vortex yarns showed the highest initial modulus and ring yarns showed the lowest ones which results in a stiff tactile feeling of air vortex yarns in regards to the initial modulus of yarns. Dry and wet thermal shrinkages of air vortex yarns were lower than ring yarns. Good shape retention of vortex yarns was estimated due to low thermal shrinkage.
The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.
This study investigated the physical properties of warm up yarns and their knitted fabrics including the dye affinity and color fastness to washing of these knitted fabrics according to the various dyeing times and temperatures on dyeing process. The results were summarized as follows. The tenacity of Nylon/PP warm-up yarn was 4g/d and breaking strain was 4.5%. The wet and dry thermal shrinkages were higher than those of PET warm-up yarn. The maximum heat flow rate(Qmax) of Nylon/PP warm-up knitted fabric was lower than that of PET warm-up knitted fabric and heat keeping rate(a) of Nylon/PP warm-up knitted fabric was higher as 47% than that of PET warm-up knitted fabric. It was shown that the shape retention and wearing comfort of Nylon/PP warm-up knitted fabric were better than those of PET warm-up knitted fabric. The dye-affinity(K/S) of Nylon/PP warm-up knitted fabric showed maximum value at the dyeing condition of 40minute or 50minute dyeing time with $80^{\circ}C$ dyeing temperature, but PET warm-up knitted fabric showed maximum value at the 30minute or 40minute with $110^{\circ}C$ dyeing temperature. Finally, the color fastness to washing of Nylon/PP warm-up knitted fabric showed good value as between 4 and 5 grade.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.