• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.201-211
• /
• 1997

A clearly consistent finite element formulation for geometrically non-linear analysis of space frames is presented by applying incremental equilibrium equations based on the updated Lagrangian formulation and introducing Vlasov's assumption. The improved displacement field for symmetric cross sections is introduced based on inclusion of second order terms of finite rotations, and the potential energy corresponding to the semitangential rotations and moments is consistently derived. For finite element analysis, elastic and geometric stiffness matrices of the space frame element are derived by using the Hermitian polynomials as shape functions. A co-rotational formulation in order to evaluate the unbalanced loads is presented by separating the rigid body rotations and pure deformations from incremental displacements and evaluating the updated direction cosines of the frame element due to rigid body rotations and incremental member forces from pure deformaions. Finite element solutions for the spatial buckling and post-buckling analysis of space frames are compared with available solutions and other researcher's results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.105-111
• /
• 2003

Wheel for passenger car support the car weight with tires, and they transmit rolling and braking power into the ground. Whittling away at wheel weight is more effective to boost fuel economy than lighting vehicle body structure. A shape of hole in disk is optimized for minimizing the weight of steel wheel. Pro/ENGINEER program is used for formulating the design model, and ANSYS package is selected for analyzing the design model. It has difficulties to interface these commercial software directly. For Combining both programs, response surface methodology is applied to construct approximation functions for maximum stresses and maximum displacements are obtained by full factorial design of five levels. This steel wheel is modeled in 14-inch diameter of rim, and wide parameter of hole in disk is only selected as design variable for reducing the weight of steel whee. PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm, which used the second-order information in the direction finding problem and uses the active set strategy, is used for solving optimization problems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.335-341
• /
• 2009

In this paper, review of developed MLS-based finite elements and a proposal for their applications are described. The shape functions and their derivatives of MLS-based finite elements are constructed using Moving-Least Square approximation. In MLS-based finite element, using the adequate influence domain of weight function used in MLS approximation, kronecker delta condition could be satisfied at the element boundary. Moreover, because of the characteristics of MLS approximation, we could easily add extra nodes at an arbitrary position in MLS-based finite elements. For these reasons, until now, several variable-node elements(2D variable element for linear case and quadratic case and 3D variable-node elements) and finite crack elements are developed using MLS-based finite elements concept. MLS-based finite elements could be extended to 2D variable-node triangle element, 2D finite crack triangle element, variable-node shell element, finite crack shell element, and 3D polyhedron element. In this paper, we showed the feasibility of 3D polyhedron element at the case of femur meshing.

• Korean Journal of Environment and Ecology
• /
• v.22 no.2
• /
• pp.145-151
• /
• 2008

The purpose of this study was to understand users' attitudes for trail structure conditions in Dobong district, Bukhansan National Park, Korea. For this purpose, the research conducted a respondent's-personal entry-method based questionnaire survey on 250 visitors using inquiry routes in Dobong areas in Bukhansan National Park in July, 2007. The survey result showed that the 6 types of pedestrian trail structures were relatively in better shape in its quality and quantity while the responses for 3 types of structures, such as wood deck, wood railings, and stone paving, were positive in terms of harmony with landscape, preservation of resources, and user convenience. In conclusion, it is considered to be essential to bring in nature-friendly materials for walking facilities in National Parks and also necessary to consider the visual effect arising from the harmony with landscape together with the functions of conservation of resources and inquiry convenience.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.335-341
• /
• 2008

This study aims to present the basic information on ready-made clothes production for middle-aged women by examining the clothing-related problems due to the body-shape changes of middle-aged women, and accordingly analyzing the satisfaction level with the purchasing and size of ready-made clothes among the 40-50's women. For this study, a survey was conducted to find out the satisfaction level with the purchasing and size of ready-made clothes. Among the total of 450 copies of questionnaires, 443 were collected, 400 of which were used in the analysis leaving out the rest imperfect ones. SPSS 11.0 Program was used in data analysis to get the frequency and percentage of each item. As for the preferred styles according to the age, respondents aged 45-49 preferred sweaters and trousers most, while most of middle-aged women preferred blouses and trousers most. As for the preferred styles according to occupations and body figures, most of middle-aged women preferred blouses and trousers most. The findings of this study examining the actual conditions of ready-made clothes purchase and wearing, and size satisfaction among the 40-50's women, who will be at the center of the aging populations in the Super-aged society highlight the need to correct the problems of adherence only to the prices, measures, and aesthetic aspects of fashion trends, to meet the requirements and preferences of ready-made clothes for aging women, and fulfill satisfactory functions according to the body figures in the upcoming Super-aged society.

• Spatial Information Research
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2011

This study performed quantitative assessment of the performance of adjustment models by a-priori analysis of the statistics of the surface parameter estimates against modeling factors. Lidar, airborne imagery, and SAR imagery have been used to acquire the earth surface elevation, where the shape properties of the surface need to be determined through neighboring observations around target location. In this study, parameters which are selected to be estimated are elevation, slope, second order coefficient. In this study, several factors which are needed to be specified to compose adjustment models are classified into three types: mathematical functions, kernel sizes, and weighting types. Accordingly, a-priori standard deviations of the parameters are computed for varying adjustment models. Then their corresponding confidence regions for both the standard deviation of the estimate and the estimate itself are calculated in association with probability distributions. Thereafter, the resulting confidence regions are compared to each other against the factors constituting the adjustment models and the quantitative performance of adjustment models are ascertained.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.535-542
• /
• 2015

This study performs statistical analysis through a questionnaire in order to examine effects of shapes of beards on a formation of male image in male/female workers in their 30s-40s. The findings suggest that sensitive image response factor depending on the shapes of beards functions as an important one in the modifications of attraction, character and image. Although there is a difference between male and female, in the preference for beards' shapes effective in the change of image, no difference is found in sensitive responses of them according to quantities of beards. This study has an implication for quantifying sensitive responses to the formation effect of male image depending on the shapes of them. It provides a guideline for total image making to males who want to change their external image formation according to shape changes of beards in the future, and is simultaneously expected to be used as basic and applied materials in the beauty industry for males.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.81-94
• /
• 2005

This study is aimed at giving the basic information for individual farm households to make decisions for optimizing their farm sizes and for the government to implement farm size optimization policies through the identification of combinations among rice production factors in plain areas like Cheolwon district and the suggestion of the optimal farm sizes of individual farmers based on the scale of economy calculated. The data of agricultural production costs of 50 rice farmers in the plain area which is located in Dongsong-eup Cholwon district, Kangwon province were used in the analysis. The 'translog' cost function among various methods which is a flexible function type was adopted to calculate the scale of economy in rice production. Seemingly unrelated regression(SUR) method was used in forecasting functions and processing other statistics by SHAZAM which is one of the computer aid program for quantitative econometric analysis. In conclusion, the long-run average cost(LAC) curve showed 'U-shape' which was different from 'L-type' one which was shown in the previous studies by others. The lowest point of the LAC was 9.764ha and the concerned production cost amounted to 633 Won/kg. Based on these results, it have to be suggested that around 10 ha of paddy is the target size for policy assistances to save costs under the present level of farming practices and technology. The above results show that the rice production costs could be saved up to 10ha in Cheolwon plain area which is a typical paddy field. However, land use, land condition, land ownership and manager's ability which may affect scale of economy should be considered. Furthermore, reasonable management will have to be realized by means of labor saving technology and cost saving management skill like enlargement of farm size of rice.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.293-300
• /
• 2012

In this study, the delamination analysis has been implemented to investigate the initiation and propagation of crack in composite laminates composed of orthotropic materials. A simple modeling was achieved by moving nodal technique without re-meshing work when crack propagation occurred. This paper aims at achieving two specific objectives. The first is to suggest a very simple modeling scheme compared with those applied to conventional h-FEM based models. To verify the performance of the proposed model, analysis of double cantilever beams with composite materials was implemented and then the results were compared with reference values in literatures. The second one is to investigate the behavior of interior delamination problems using the proposed model. To complete these objectives, the full-discrete-layer model based on Lobatto shape functions was considered and energy release rates were calculated using three-dimensional VCCT(virtual crack closure technique) based on linear elastic fracture mechanics.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.57-64
• /
• 1999

To effectively identify near-surface faults with vertical slips from seismic refraction data, the GRM interpretation technique is tested and investigated in terms of various parameters through computer modeling. A characteristic change in shape of the velocity-analysis function near faults is noticed, and a new strategy of `Slope Variation Indicator (SVI)' is developed and tested in this study. The SVI is defined as a first horizontal derivative of the difference of velocity analysis functions for a large XY value and a small one, respectively. As the dip of refractor decreases and as the difference in XY value increases, the peak value of SVI increases and its duration decreases. Consequently, the SVI indicates accurately the location of buried fault in the test models. The SVI is believed to be an efficient tool in seismic refraction method to investigate location and distribution of shallowly buried faults.