• 대한한의학회지
• /
• 제29권5호
• /
• pp.104-110
• /
• 2008

Objectives : The purpose of this study is to develop the method of selecting representative pulse wave. Methods : The pulse waves were acquired at the right and the left Guan point(關部) with 1420 people who were apparently healthy. The shape agreement of right and left pulse wave and the floating-sinking ratio were compared with three cases, which were the pulse height based method, the pulse area based method, and the pulse time based method. Results : In the point of the shape accordance, the pulse time based method was the best, and the pulse area based method was the worst. In the point of the floating-sinking ratio, the pulse height based method was the worst, and the pulse time based method was the best. Conclusions : So, the pulse time based method was recommended for selecting the representative pulse wave. This study compared the selection methods of representative pulse using the physiological characteristics of pulse wave. Further studies are required, because the representative pulse wave is the main factor of determining the shape and the floating-sinking characteristic of the pulse wave.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.62-66
• /
• 2015

Induction generator is easy to durability and maintenance than the synchronous generator. So, recently Induction generator has been widely applied to small-scale hydroelectric power plant. When the rotor is operating faster than synchronous speed, induction machine can generate electric power. Induction generator has a large inrush currents, such as the starting current of the induction motor. Induction motor has been designed a variety of rotor shape in order to reduce starting current. Since the occurrence of high inrush current cause a voltage drop to the system, it will need to reduce possible. Because the starting current of the squirrel-cage induction motor varies in accordance with the rotor shape, it is necessary to analyze the magnitude of inrush current in order to apply to the generator. In this study, we analyzed the inrush current and the voltage drop caused in accordance with the rotor shape of 1500kw induction generator.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1817-1824
• /
• 1990

This paper describes a shape matching algorithm for occluded or distorted two-dimensional objects. In our approach, the shape matchin is viewed as a segment matching problem. A shape matching algorithm, based on both the stochastic labeling technique and the hypothesis generate-test paradigm, is proposed, and a simple technique which performs the stochastic labeling process in accordance with the definition of consisten labeling assignment without requiring an iterative updating process of probability valiues is also proposed. Several simulation results show that the proposed algorithm is very effective when occlusion, scaling or change of orientation has occurred in the object.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2006년도 춘계학술발표회 논문집
• /
• pp.153-153
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1375-1376
• /
• 2011

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.326-331
• /
• 2015

In this paper, we study the insulating properties of the liquid nitrogen(LN2) including the thermal bubbles. The shape of the thermal bubbles in accordance with the current change was observed in the 77 K and 65 K LN2. According to the temperature of liquid nitrogen, bubbles were generated differently. The round shape of the bubble is occurred in 77 K LN2. But the layer shape of bubble is occurred in 65 K LN2. When the bubbles present, the dielectric strength of liquid nitrogen is low. However, the breakdown patterns were different according to the electrode arrangement. AC breakdown voltage(BDV) was lower than the DC BDV due to the influence of bubbles. Therefore, the design of a high-voltage superconducting equipments should consider the bubbles.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.154-159
• /
• 2004

This study is aimed to diminish the errors which created during transforming from 3D shape created with CAD program to STL file formation. The length strain which created on X-Y axises at STL file transforming is diminished by using the relation between common shape error and shrinkage rate. As the result of study, we have confirmed the length strain in accordance with facetres value. Also, the shape error is compensated with shrinkage rate by error of length strain. so, we could diminish to shape error by several tens micrometer.

• 한국컴퓨터정보학회논문지
• /
• 제24권2호
• /
• pp.85-93
• /
• 2019

The purpose of this study is to provide basic data for the development of clothing which can improve the satisfaction of male university students' body shape by classifying the perception of body shape and examining characteristics by type. The types of recognition of body shape of male college students were classified into five types: developed upper body with protruding under abdomen, normal body with long legs, developed under body with big skeleton, skinny body, and ladder type normal body. The actual body shape was classified into three. The Y type had a long chest length and a shoulder developed, and the lower body silhouette was plain and short. Type H was flat with little protrusion from the chest to the hip. Type X has a larger hip and longer hip length than the waist. Body type was classified based on bust, waist, and hip circumference, but recognition body type was classified based on visual characteristics. It is thought that ergonomic consideration is needed to cover the disadvantages of each body type considering the aesthetic part as well as wearing comfort in accordance with the trend of the fashion market nowadays that the slim fit is generalized. This study was limited to male university students in their early 20s in Chungbuk province. Therefore, we could not grasp attitudes and perceptions of male university students living in other provinces. Therefore, we should pay attention to the generalization of the results of this study.

• Structural Engineering and Mechanics
• /
• 제35권2호
• /
• pp.127-140
• /
• 2010

This paper focuses on a number of criteria that enable controlling the influence of geometric simplification on the quality of finite element (FE) computations. To perform the mechanical simulation of a component, the corresponding geometric model typically needs to be simplified in accordance with hypotheses adopted regarding the component's mechanical behaviour. The method presented herein serves to compute an a posteriori indicator for the purpose of estimating the significance of each feature removal. This method can be used as part of an adaptive process of geometric simplification. If a shape detail removed during the shape simplification process proves to be influential on mechanical behaviour, the particular detail can then be reinserted into the simplified model, thus making it possible to readapt the initial simulation model. The fields of application for such a method are: static problems involving linear elastic behaviour, and linear thermal problems with stationary conduction.

• 한국의류산업학회지
• /
• 제15권1호
• /
• pp.130-137
• /
• 2013

The percentage of overweight people has increased in older people due to the change of body shape (including pregnancy and giving birth for women). Obesity is accompanied by body shape changes; subsequently, there are more pattern design considerations compared to standard body shapes. This paper classifies the upper body shape of overweight women in Korea, analyzes features by body shape and proposes basic pattern design data that reflects the features of plus-size women body shapes. The data on 540 subjects in the overweight group (from 20 to 69 years old)whose BMI was over 25 was selected. The following features by shape were identified in accordance with the upper body shape classification of overweight women. Body Shape1 had lower body obesity with long stature and arms in proportion to the trunk length and represented 22.2% of the subjects. Body Shape2 had most parts near average sizes for overweight body shapes with short height and arms that represented 37.6% of the subjects (the highest ratio). Body Shape3 was the smallest body shape in the four groups with the most distinct body figure and represented 30.7% of the subjects. Body Shape4 (9.4% of the subjects)was the upper body obesity type (the fattest group)and with of the waist bigger abdominal obesity type.