• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.415-420
• /
• 1999

본 연구의 목적은 SEA모델링 기법을 이용하여 시스템 응답 특성을 예측 하는데 있어서 연견 손실 계수(coupling loss factor). 내부 손실 계수(internal loss factor)와 같은 주요 변수의 값을 압전 지능 구조물을 이용하여 도출 하는 .것이다. 관심 주파수 대역에서 임피던스(impedance) 해석기를 이용해 압전 지능 구조물의 임피던스를 측정하고 랜덤 가진 시 압전 지능 구조물의 부하전압을 측정, 시스템에 가해지는 전기적 파워를 구하였다. 이 값을 전기-기계적 연결 계수(electro-mechanical coupling coefficient)를 이용 기계적 파워로 상사 시키고 이때 시스템에 저장되는 에너지를 가속도계를 이용해 측정 하였다. 이 결과 값을 이용하여 연결 손실 계수와 내부 손실 계수를 구하여 보았다. 또한 이론식을 이용하여 얻은 이론 값과 기존의 가진기(shaker)를 이용하여 얻은 실험 값과 비교 분석 하였다.

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.239-249
• /
• 2018

Physical tests are performed at various stages of the development cycle of a product, from prototype validation to product qualification. Although costly, there are growing demands for qualification tests like endurance vibration testing to be more representative of the real world. At the same time there are growing demands to assess the durability of these items based on FEA simulation. In this paper, we will explain how to set up a CAE-based test and how to correlate the results with some physical measurements. Specific assumptions will be explained and some advantages of using virtual tests will be highlighted such as the reduction of the number of prototypes needed, investigations on failures, evaluation of the level of reliability via sensitivity analysis, evaluation of the margins are at the end of a successful test. This presentation will therefore focus on explaining and showing how virtual tests can enrich the exploitation of physical tests.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.291-294
• /
• 2000

Marine fungus, Thraustochytrium aureum ATCC 34034, was incubated in artificial sea water media in order to produce docosahexaenoic acid(DHA). Cultures were performed at $24^{\circ}C$ in light for 3 days with orbital shaker at 200rpm. Maximum cell productivity of 1.34g/L and DHA yield of 41.4 mg/L were obtained by using this method, which is almost the twice level of DHA yield obtained for the strains reported previously. This strain did not produce DHA in YM media and YPG media. The results indicate that salinity influenced cell growth and production of DHA.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.352-356
• /
• 1996

Alcoholic distillery wastes are utilized as dual purposes to produce PHB in lower production cost and to reduce the amount of waste to be treated. In this study, various attempts were made to increase PHB production under various conditions by Actinobacillus sp. EL-9 in a shaker culture. The addition of glucose, NH$_{4}$NO$_{3}$ to alcoholic distillery wastes slightly promoted cell mass and PHB production. Enzyme hydrolysis of alcoholic distillery wastes increased the production of PHB than that of untreated waste and acid hydrolysis treatment. The PHB weight in alcoholic distillery wastes was 1.91 g/l. Fermentation process of PHB production reduced the amount of COD value up to 54%, which reduced organic loading rate and capacity of activated sludge system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.718-721
• /
• 2007

The ionic-polymer-metal-composite actuators have the best merit for bio-mimetic locomotion because of their large bending performance. Especially, they have the advantage for mimicking a fish-like motion because IPMCs are useful to be actuated in water. So we have developed IPMC actuators with multiple electrodes for realization of biomimetic motion. This actuator is fabricated by combining electroless plating and electroplating techniques capable of patterning precisely and controlling a thickness of Pt electrode layer. The FRF analysis was conducted by a mechanical shaker and direct electrical excitation which is based on sweep sine wave function. From this result, the proper young‘s modulus of Platinum was investigated and applied on expecting the vibration characteristics of patterned IPMC actuator. The calculated maximum displacement of the patterned IPMC was 2.32mm under an applied 4mN/mm. The natural frequency was increased however displacement was decreased in according to increase a thickness of Pt.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.898-902
• /
• 2006

The motion of a system composed of a plate, constant springs and varying dampers is considered when the system is subject to harmonic force. Letting the frequencies of harmonic force and damper variation ${\Large f}_1\;and\;{\Large f}_2$ respectively, the displacement at the center of the plate has the strongest component at frequency ${\Large f}_1$. The angular displacement of the plate has strong components at ${\Large f}_1-{\Large f}_2$ and the natural frequency of the rotational mode of the system. If these two frequencies coincide, the plate oscillates with almost single frequency and a large amplitude. Part of these simulation results are proved analytically.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.393-399
• /
• 1997

This study proposes a methodology with which the optimal damper positions of the feeding system in a CD-ROM drive are determined to removal the harmful tilting vibration modes. For this purpose, vibration characteristics of the feeding system are identified by a theoretical modeling as well as vibration experiments. We perform the modal testings using the impact hammer and shaker; furthermore, we establish a vibration model due to the rigid-body motion. The analysis and experiments show that the feeding system has three rigid-body vibration modes in the low-frequency region and two of them come from the tilting modes. We show that the tilting modes can be removed by determining the damper positions.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.699-704
• /
• 1996

About 600 microorganisms isolated from soil, marsh, compost, etc. were examined for their flocculating ability in the kaolin suspension and swine wastewater. Among them, K-199 was the best producer of flocculant and was identified to be a species belong to the genus Corynebacterium. The maximum production of the flocculant from Corynebacterium sp. K-199 was observed in culture medium containing 2% glycerol, 0.4% peptone, 0.3% K$_{2}$HPO$_{4}$, 0.1% CaCO$_{3}$, 0.05% NaCl, 0.1% yeast extract, 0.1% MgSO$_{4}$,7H$_{2}$O and initial pH 7.5 when cultured with rotary shaker controlled at 25$\circ$C and 150 rpm. Under the optimal culture condition with jar fermentor, the maximum production was reached to flocculating activity of 780 units/ml after 4 days. From the results of the activity be fully maintained by periodate oxidization, it suggests that the activity is due to the protein.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.104.2-105
• /
• 2003

Plant steryl esters have good effects on plasma cholesterol level and are used as functional food ingredient. Conjugated linoleic acid (CLA) presents mainly in animal foods and has a good benefit and medium chain fatty acids (MCFAs) are a rapid energy source for human. In this study, we produced the ${\beta}$-sitosterol esters from CLA and MCFAs using various lipases as catalysts. Among lipases, AYS (from Candida rugosa) was the most effective for synthesis of ${\beta}$-sitosterol esters in the presence of water (24.35% conversion) or hexane (25.33% conversion). The second esterification extent was obtained by lipase AK (from Pseudomonas sp), showing 10.26% conversion in water and 15.94% conversion in hexane, respectively. The reaction condition was 1:3 molar ratio (${\beta}$-sitosterol:fatty acid, 1:3) and stirred (175 rpm) at 55$^{\circ}C$ in water bath shaker for 48h.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.90.5-90
• /
• 2002

In this research, we are trying to develop an automatic sorting system, which is mostly affected by frictional forces between a veneer and plank. So we will make a suitable dynamic model and mechanism to control the velocity feedback. We will suggest stick-slip motion model which can predict the stability behavior of this system. The control system has a feedback loop, in which the following operations are included. A kind of sensor can get the velocity of the mass to adhesive veneer. The output of result signal should be passed to a filter, then to a phase shifter, which applies an adjustable phase-shift, to a variable-gain amplifier. A shaker will be attached to the mass, which ex...