Journal of KSNVE (소음진동)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지

Optimal Position of the Dampers in a CD-ROM Drive to Remove the Tilting Vibration mode

기울어짐 진동 모드 제거를 위한 CD-ROM 드라이브의 댐퍼 최적 위치

  • 정진태 (한양대학교 공학대학 기계공학과) ;
  • 박준민 (한양대학교 대학원 정밀기계공학과) ;
  • 노대성 (삼성전자㈜ CD-ROM 사업부)
  • Published : 1997.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study proposes a methodology with which the optimal damper positions of the feeding system in a CD-ROM drive are determined to removal the harmful tilting vibration modes. For this purpose, vibration characteristics of the feeding system are identified by a theoretical modeling as well as vibration experiments. We perform the modal testings using the impact hammer and shaker; furthermore, we establish a vibration model due to the rigid-body motion. The analysis and experiments show that the feeding system has three rigid-body vibration modes in the low-frequency region and two of them come from the tilting modes. We show that the tilting modes can be removed by determining the damper positions.

Keywords

References

  1. Automatica v.28 no.3 Adaptive Control of the Radial Servo System of a Compact Disk Player Draijer, W.;Steinbuch, M.;Bosgra, O. H.
  2. Sensors and Actuators, A: Physical v.32 no.3-1 Non-Contact Absolute Position Mea-Surement using a Compact Disk Player Optical Pick-Up During, C.;Anderson, S.;Wilkander, J.
  3. Proceedings of the American Control Conference v.3 Design and Implementation of a QFT Controller for a Compact Disc Player Chait, Y.;Park, M. S.;Steinbuch, M.
  4. Proceedings of the IEEE Conference on Decision anc Control v.2 Adaptive Repetitive Control of a Compact Disc Mechanism Dotsch, H. G. M.;Smakman, H. T.;Van den, H. ;Paul, M. J.