• Korean Journal of Human Ecology
• /
• v.17 no.2
• /
• pp.305-313
• /
• 2008

This subject investigated visual evaluation of preference and fitness level of set-in sleeve in sleeve types(form)and studied suitable sleeve type at silhouette and targeted female students in twenties. The results of study were as follows: 1. Visual evaluation factors in set-in sleeve of sleeve types were selected 6 factors; the 1st factor is decorativeness, the 2nd factor is attractiveness, the 3rd factor was activeness, the 4th factor was feminine, the 5th factor was charming and 6th factor was a figural element. Decorativeness and attractiveness factors in visual evaluation of sleeve types were the most important level. 2. The visual evaluation differences of sleeve types in set-in sleeve were as follows; in the 1st factor, S and P2 were the most decorative sleeve type. in the 2nd factor, S, P2 and P3 are the most attractive sleeve type. in the 3rd factor, B and P3 were the most active sleeve type. in the 4th factor, L was the most feminine sleeve type. in the 5th factor, P1, L and P3 were charming sleeve type. in the 6th factor, P3 was evaluated that it shows narrowened shoulder sleeve types. 3. The analysis result of preference and wearing level in each sleeve types were as follows. 20's female university students like to wear S, P1, P2 and P3 sleeve types and the most favorite sleeve types are S, P2 and P3. 4. The analysis result of silhouette set-in sleeve in sleeve types; S, B and P2 in H-type silhouette, P2, S and P1 in A-type silhouette, B and P3 in O-type silhouette, L and P3 in X-types silhouette were show the most suitable sleeve types.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.85-94
• /
• 2010

Comparative analysis of marker efficiency in blouse patterns, based on different sleeve designs, was carried out. Sleeve designs used included set-in-sleeve, laglan sleeve, and epaulet sleeve. The two types of epaulet sleeves, A and B, are based on pattern arrangement methods of center back. Cloth and production conditions are the width of cloth, the number of marking pieces, and the direction for marking deployment. A blouse pattern saved to the PAD CAD System was graded with different sizes and arranged for industrial purpose to calculate the marker efficiency in different conditions. The results were as follows. On the whole, the marker efficiency of small pattern sized set-insleeve was higher than laglan and epaulet sleeve designs. It was also established that marker efficiency is dependent on cloth and production conditions. For small number of marking pieces, efficiency was higher in the condition of 110cm cloth widths compared with that condition of 150cm cloth widths. However the efficiency of large number of marking pieces was higher in the condition of 150cm cloth widths.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.59-71
• /
• 2011

As an exaggerated-shoulder becomes a growing trend women's clothing, the crescent shaped sleeve with parallel style lines in the arm hole is a highly used women's sleeve pattern. This study develops and provides an applicable method for making the crescent shaped power shoulder sleeve. An efficient basic method for making the 2 piece crescent shaped sleeve was developed and the sensory appearance test was carried out with experimental clothes. There are two principles for making the crescent shaped sleeve: having a style line in the sleeve and pasting part of the cut arm hole of the bodice to the sleeve. The latter would be more convenient for a 2 piece sleeve, mostly used for jackets. The crescent shaped sleeve used in power shoulder jackets should set the shoulder angle as you wish to extend and raise the shoulder point of the bodice and sleeve to the same height. For a stronger power shoulder image, a 3 piece sleeve has a better appearance. Also, the height of the shoulder has to be enhanced with a shoulder pad for a more stable sleeve.

• Journal of Korea Foundry Society
• /
• v.25 no.4
• /
• pp.168-172
• /
• 2005

In this study, the effects of chill layers occurred in shot sleeve on the molten metal filling were analyzed through computer simulation and the behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. And particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the big reduction in chill layers, excellent trimmed surface and the highest densification were achieved, suggesting that as the optimal sleeve condition in diecasting, especially for the highly complex parts like valve body.

• Korean Journal of Materials Research
• /
• v.16 no.11
• /
• pp.698-704
• /
• 2006

In this study, the effect of chill layers occurred in shot sleeve on the molten metal filling was analyzed through computer simulation. The behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. Particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the biggest reduction in chill layers, excellent trimmed surface and the highest density were achieved, suggesting that as the optimal sleeve condition in aluminum high pressure diecasting, especially for highly complex parts like valve body.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.641-650
• /
• 2008

In this study, seven models with distinctly different body types were researched and explanatory variables were reviewed. Review was done by using body measurements and the measurements of the appropriate bodice patterns in 1D, 2D, and 3D measurement methods in order to review the pattern making system and the equations for calculating the dimensions of the sleeve caps, which are readily available. Data on human bodies, which can be the criteria for each body part required for the new system for making sleeve cap part, were selected considering conditions such as items with a significantly high contribution rate from the results of regression analysis and the easiness of measurement. As a result of research, an explanatory variable required for the system for making sleeve caps with high general use was extracted. All items with the exception of the waist circumference and upper arm circumference were about the measurement of the form of human bodies, which were newly set in this study. As a result of this study, the equations for calculating the dimensions of each part of the sleeve caps showed distinct differences in comparison to the conventional system of construction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.123-137
• /
• 2017

The purpose of this study is to suggest sleeve cap height with a satisfying wearing sensation and appearance on jackets for women in their twenties so that high-consumer demand jackets can be produced. Five experimental jackets with sleeve cap heights of [(AH/3)-1cm], [(AH/3)-0.5cm], [AH/3], [(AH/3)+0.5cm] and [(AH/3)+0.8cm] were made for 30 subjects to try on after which the subjects were then surveyed for their assessment of appearance, wearing sensation and preference. On the basis of the results, the optimum height of the sleeve cap has been proposed along with the following contents and results of this research. 1. [AH/3] [(AH/3)+0.8cm] of sleeve cap height was assessed to beof desirable appearance. 2. [AH/3] of sleeve cap height garnered a high opinion in terms of intuitive wearing sensation, while [(AH/3)-1cm] [AH/3] were the heights with overall satisfaction of intuitive and movement wearing sensations. If discomfort in the upper sleeve at 'straight arm' posture can be tolerated, the sleeve cap height can be set to [(AH/3)-1cm]~[(AH/3)+0.5cm]. 3. [AH/3] and [(AH/3)+0.5cm] were found to have a high preference among wearers, which indicated that the women in their twenties prefer a slim type of sleeve, putting appearance above wearing sensation. Consequently, [AH/3] is desirable when appearance, wearing sensation and preference are considered, [(AH/3)+0.5cm] is fit for business uniform for static duties or formal dress focused on aesthetic impression and [(AH/3)-1cm]~[AH/3] are desirable for work clothes when considering active duties.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.7
• /
• pp.1008-1019
• /
• 2007

The purpose of this study was to develop an appropriate jacket pattern for elderly women over sixty years old, providing a good fit and appearance. Results were as follows: The length of the jacket was made long enough to cover the area 22.0cm below the waistline. The waist back length was made 1.7cm longer than the actual size of the waist back length. The armhole length was made 0.5cm longer than B/4, enhacing the appearance and functionality while allowing freer movement of the arms. As for the front and back interscye breadths, the front interscye breadth was made 1.7cm larger than the actual size while the back interscye breadth was only 1.0cm larger, providing the front interscye breadth more space. The bust breadth was made 10.0cm larger than the bust circumference measure(B/4+2.5cm), the waist breadth was made 6.0cm larger than the waist circumference measure(W/4+1.5cm), The hip breadth was made 12.0cm larger than the him circumference measure(H/4+3.0cm). The sleeve length was made 3.0cm larger than the arm length measure, as the sleeve length of a jacket is usually long enough to cover the ulnar styloid. The sleeve width was made 5.0cm larger than the upper arm circumference measure, as the upper arm circumference measure of the model pattern was too large than necessary, worsening the overall appearance. The sleeve cap height was set at AH/4+4.7cm. The wrist circumference of 27.0cm was set, allowing 2/3 and 1/3 for the large sleeve and small sleeve respectively.