• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.439-447
• /
• 2012

In this paper, an input-series auxiliary power supply scheme is proposed, which is suitable for high input voltage and multiple-output applications. The power supply scheme is based on a two-transistor forward topology, all of the series modules have a common duty ratio, all the switches are turned on and off simultaneously, and the whole circuit has a single power transformer. It does not require an additional controller but still achieves efficient input voltage sharing (IVS) for each series module through its inherent transformer-integration strategy. The IVS process of this power supply scheme is analyzed in detail and the design considerations for the related parameters are given. Finally, a 100W multiple-output auxiliary power supply prototype is built, and the experimental results verify the feasibility of the proposed scheme and the validity of the theoretical analysis.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.5
• /
• pp.221-228
• /
• 2001

In this paper, a new control algorithm of series active power filter is proposed to reduce harmonic generated from nonlinear load in power system. In conventional control algorithm, harmonic current must be calculated firstly, and then compensation voltage was calculated by using the results but the proposed control algorithm can calculate compensation voltage directly. Compensating principle of proposed control algorithm is presented in detail. A combined system of series active filter and passive filter is composed in order to experiment. Experiment was carried out to verify proposed control algorithm of series active filter and experimental results are analyzed.

• The Korean Journal of Applied Statistics
• /
• v.25 no.4
• /
• pp.641-650
• /
• 2012

Spatial time series data can be viewed as a set of time series simultaneously collected at a number of spatial locations. This paper studies Bayesian inferences in a spatial time bilinear model with a Gibbs sampling algorithm to overcome problems in the numerical analysis techniques of a spatial time series model. For illustration, the data set of mumps cases reported from the Korea Center for Disease Control and Prevention monthly over the years 2001~2009 are selected for analysis.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.7-12
• /
• 2005

This paper presents several time series methods to analyze the chatter mechanics by using the power spectrum of these algorithms considering the cutting dynamics. In this study, several time series models such as AR(burg, forwardbackward, geometric lattice, instrument variable, least square, Yule Walker), ARX(1s, iv4), ARMAX, ARMA, Box Jenkins, Output Error were modeled and compared with one another. Finally, it was proven that time series modelings are also a desirable and reliable algorithm than the other conventional methods(FFT) for the calculation of the chatter mode in turning operation. Also, the spectrum of times series methods is a little bit more powerful than the FFT fer the detection of a high noisy and weak chatter mode. The radial cutting force Fy has been used for spectrum and chatter stability lobe analysis in this study.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.6
• /
• pp.235-240
• /
• 2002

This paper presents a new method for estimating the block pulse series coefficients by using the Lagrange's second order interpolation polynomial. Block pulse functions have been used in a variety of fields such as the analysis and controller design of the systems. When the block pulse functions are used, it is necessary to find the more exact value of the block pulse series coefficients. But these coefficients have been estimated by the mean of the adjacent discrete values, and the result is not sufficient when the values are changing extremely. In this paper, the method for improving the accuracy of the block pulse series coefficients by using the Lagrange's second order interpolation polynomial is presented.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.917-918
• /
• 2006

In this paper, a novel new pulse power generatorbased on IGBT stacks is proposed for pulse power application. Proposed scheme consists of series connected 9power stages to generate maximum 60kV output pulse and one series resonant power inverter to charge DC capacitor voltage. Each power stages are configured as 8 series connected power cells and each power cell generates up to 850VDC pulse. Finally pulse output voltage is applied using total 72 series connected IGBTs. The synchronization of gating signal is importantfor series operation of IGBTs. For gating signal synchronization, full bridge inverter and pulse transformer generates on-off signals of IGBT gating and specially designed gate power circuit was used.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.527-534
• /
• 2020

This study aims to monitor the displacement of the bridges using Stanford Method for Persistent Scatterers (StaMPS) time-series Persistent Scatterer Interferometric Synthetic Aperture Radar analysis. For case study bridges: Kimdaejung bridge and Deokyang bridge, we acquired 60 and 33 Cosmo-Skymed Synthetic Aperture Radar (SAR) data over the Mokpo region and Yeosu region, respectively from 2013 to 2019. With single-look interferograms, we estimated the long-term time-series displacements over the bridges. The time-series displacements were estimated as -8.8 mm/year and -1.34 mm/year at the mid-span over the selected bridges: Kimdaejung and Deokyang bridge, respectively. This time-series displacement provides reliable and high spatial resolution information to monitor the structural behavior of the bridge for preventing structural behaviors.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.316-320
• /
• 2008

This paper described the design and fabrication of a series arc detection module to monitor electrical insulation in low-voltage system. The module consists of a passive high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage by 80 dB and an active band-pass filter with a frequency of 4 kHz to detect series arc signals only. For the application experiment, we simulated series arcing phenomena on various loads such as incandescent lamp controlled by dimmer and inverter fed induction motors by an arc generator specified in UL1699. From the experimental results, we could detect series arc signals without an influence of noises.

• Nuclear Engineering and Technology
• /
• v.43 no.3
• /
• pp.287-300
• /
• 2011

Counting statistics modified by introducing two dead times in series under a Poisson input distribution are discussed. A previous study examined the two cases of series combinations of nonextended-extended (NE-E) and extended-extended (EE) dead times. The present study investigated the remaining two cases of extended-nonextended (E-NE) and nonextended-nonextended (NE-NE) dead times. For the three time origins of the counting processes - ordinary, equilibrium, and shifted processes - a set of formulae was newly developed from a general formulation and presented for the event time interval densities, total densities, and exact mean and variance of the counts in a given counting duration. The asymptotic expressions for the mean and variance of the counts, which are most convenient for applications, were fully listed. The equilibrium mean count rates distorted by the three dead times in series were newly derived from the information obtained in these studies. An application of the derived formulae is briefly discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.467-476
• /
• 2004

Recently, an approximation of a wavelet series has been developed in the analyses of an unknown function. Most of articles have been studied on thresholding and shrinkage methods for its wavelet coefficients based on (non)parametric and Bayesian methods when the sample size is considered as a maximum resolution in wavelet series. In this paper, regardless of the sample size, we are focusing only on the choice of a maximum resolution in wavelet series. We propose a Bayesian approach to the choice of a maximum resolution based on the linear combination of the wavelet basis functions.