• 대한의용생체공학회:의공학회지
• /
• 제40권3호
• /
• pp.116-124
• /
• 2019

The rehabilitation training robots for treating the upper limbs of stroke patients were mainly focused on the upper proximal treatment of it, but recently studies of the distal parts of the upper limbs for rehabilitation of the hand is making some progress even though it is still a small number so far. In this paper, we present the hand robot for the rehabilitation training of stroke patients that is the fingertip contact-typed mechanism, and it has also equipped with the wrist rehabilitation unit to be worked like human hand that enables any movements through mutual cooperation by fingers while picking up or grasping objects. The robot that is presented for this purpose supports the movement of fingers with 5-DoF and the wrist with 3-DoF that moves independently, and operates with a structure that allows the joints of the wrist and fingers to be collaborated organically together to each other. Also, hereby the simulation and evaluation test on its robot mechanism are performed to ensure that fingers with 5-DoF and the wrist with 3-DoF of the serial kinematical mechanism are designed to comply with or exceed ROM for ADL.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1771-1772
• /
• 2007

The purpose of this project is to develop the visual servoing system with 5d.o.f robot manipulator. For this, we developed robot manipulator by using 5 serial RC motors and the visual system is also developed by using low cost USB CCD camera. RISC MPU ATMEGA128 is main controller MPU for the robot manipulator. To control the manipulator Kinematics was analyzed and GUI, API for vision system also were developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.107.1-107
• /
• 2002

$\textbullet$ Robot fingers $\textbullet$ Kinematics and dynamics of robot fingers $\textbullet$ 3 bar linkages $\textbullet$ Microprocessor control1er $\textbullet$ Serial communication $\textbullet$ Simulation Studies

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.401-401
• /
• 2000

A mobile manipulator-a serial connection of a mobile robot and a task robot is redundant by itself. Using its redundant freedom, a mobile manipulator can move in various modes, and perform dexterous tasks. An interesting question,

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1575-1579
• /
• 2003

This paper present the control of an intelligent home robot based on home network. The existing research is almost research of independent robot. home network will be a way that equipments in home exchange information. As robot combine home network, robot will be more intelligent and more powerful. We benefit for that load is divided in home network environment. The robot which has ultrasonic sensors performs obstacle avoidance with the Fuzzy Algorithm. Ethernet serial converter transmit the measuring data of home to a home server and the home server accumulates data. The home server controls the robot and manages home according to the acquired data. This paper supposed the home network system that consist of home server, embedded robot and intelligent home robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.734-739
• /
• 2003

A new method of estimating the pose of a mobile-task robot is developed based upon an active calibration scheme. The utility of a mobile-task robot is widely recognized, which is formed by the serial connection of a mobile robot and a task robot. For the control of the mobile robot, an absolute position sensor is necessary. This paper proposes an active calibration scheme to estimate the pose of a mobile robot that carries a task robot on the top. The active calibration scheme is to estimate a pose of the mobile robot using the relative position/orientation to a known object whose location, size, and shape are known a priori. Through the homogeneous transformation, the absolute position/orientation of the camera is calculated and that is propagated to getting the pose of a mobile robot. With the experiments in the corridor, the proposed active calibration scheme is verified experimentally.

• 제어로봇시스템학회논문지
• /
• 제12권2호
• /
• pp.194-200
• /
• 2006

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC presents many advantages such like lower power consumption, greater reliability, and lower cost. However, it is nearly impossible to use the SoC without operating systems because the SoC is included with many peripherals and complex architecture. It is required to use embedded operating systems and real-time operating systems may be used as an embedded operating system. So far, real-time operating systems are widely used to implement a Real-Time system since it meets developer's requirements. However, real-time operating systems have disadvantages including a lack of standards, expensive development, and license. Embedded Linux is able to overcome their disadvantages. In this paper, the implementation of control system platform for a mobile robot using real-time Embedded Linux is described. As a control hardware system platform, XScale board is used. As the real-time Embedded Linux, RTAI is adopted which is open source and royalty free, and supports various architectures and real-time devices, such like real-time CAN and real-time COM. This paper shows the implementation of RTAI on XScale board that means the porting procedure. We also applied the control system platform to the mobile robot and compared the Real-Time serial driver with non real-time serial driver. Experimental results show that that using RTAI is useful to build real-time control system with powerful functionalities of Linux.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.9-18
• /
• 2001

• 제어로봇시스템학회논문지
• /
• 제6권3호
• /
• pp.309-316
• /
• 2000

A coordination method for a macro/micro robot with separate controllers is proposed and evaluated. The macro/micro robot system generally has independent controllers for the macro and the micro robot respectively. A controller for the coordination of the macro and the micro robot has been designed based on the stable independent controller of each system. The method and trajectory generation method is also proposed to track the moving desired position rapidly. The control method and trajectory generation method is also proposed to track the moving desired position rapidly. The control strategy has been implemented to the macro/micron robot system to evaluate the performance. The experimental results show that the proposed method for maintaining the micro robot within its workspace has uniform performance over the various range of the bandwidth and the proposed trajectory generator is shown to be efficient.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1823-1824
• /
• 2008

We propose a remote controlled robot manipulator using force feedback joystick. User can control easily 5 d.o.f robot manipulator in 3 demensional space using general joystick. A force sensor attached in developed gripper sends signal to main robot controller so as to know gripper grasp the object. The signal also sent to user through force feedback joystick. We designed a dexterous 5 d.o.f robot manipulator analysis the kinematics and inverse kinematics. The robot was simply developed using serial RC motor. As a main robot controller, we use 32bit MPU(AT91SAM7256) and micro C/OS. To show the validity of our developed robot, a several experiments were demonstrated.