• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.11-17
• /
• 2003

In this paper, we implemented 2-wire (data gnd) RS232C serial communication interface by applying the Collision Sensing Multiple Access(CSMA) Protocol. The transmitting and receiving wires of RS232C pert are connected together by the interface circuit forming data wire without hardware modification On two-wired common channel connection simultaneous transmission Don mere than two hosts causes data collision. The collision is detected by loop-back test of transmission data comparing with the fed back data to detect the data distortion. Various models are adopted to reduce the probability of retransmitted data collision and experiments show the performance of each cases. Due to allowing multiple hosts to be accessed through the common communication channel with minimum circuit addition the result of this paper can be easily applied for conventional RS232C instruments and machines to connect to the single data communication line.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2252-2254
• /
• 1997

There are increasing demands on high accruacy DC power supplies for varous basic science reseach, such as accelerators and plasma applications, in Korea. In this paper, we present a study on 1kW class DC power supply using the parell operation method of the flyback converters. This DC power supply is equipped with a remote controller for computer interface. A Serial Communication Controller(SCC) is also developed for large scale scientific facilities which is capable of handling upto 32 power supplies simultaneously with one serial port in the host computer.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.341-350
• /
• 2005

In this study, fault diagnosis and monitoring of serial wound pre-engaged starter motors have been carried out. Starter motors are DC motors that enable internal combustion engine (ICE) to run. In case of breakdown of a starter motor, internal combustion engine can not be worked. Starter motors have vital importance on internal combustion engines. Kohonen network based fault diagnosis system is proposed for fault diagnosis and monitoring of starter motors. A graphical user interface (GUI) software has been developed by using Visual Basic 6.0 for fault diagnosis. Six faults, seen in starter motors, have been diagnosed successfully by using the developed fault diagnosis system. GUI software makes it possible to diagnose the faults in starter motors before they occur by keeping fault records of past occurrences.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.148-151
• /
• 2005

This paper proposes a high speed interface using redundant multi-valued logic for high speed communication ICs. This circuit is composed of encoding circuit that serial binary data are received and converted into parallel redundant multi-valued data, and decoding circuit that convert redundant multi-valued data to parallel binary data. Because of the multi-valued data conversion, this circuit makes it possible to achieve higher operating speeds than that of a conventional binary logic. Using this logic, a 1:4 demultiplexer (DEMUX, serial-parallel converter) IC was designed using a 0.35${\mu}m$ standard CMOS Process. Proposed demultiplexer is achieved an operating speed of 3Gb/s with a supply voltage of 3.3V and with power consumption of 48mW. Designed circuit is limited by maximum operating frequency of process. Therefore, this circuit is to achieve CMOS communication ICs with an operating speed greater than 3Gb/s in submicron process of high of operating frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2499-2502
• /
• 2005

Universal Serial Bus (USB) is one of the most popular communication interfaces. When USB is used in more extended range, especially configuring home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of Time Division Multiplexing (TDM) so that the bottleneck of bus bandwidth can be brought under the heavy traffic. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring real-time moving picture data among digital information devices, we analyze USB transfer types and descriptors and introduce the method to enhance the detailed performance of isochronous transfer that is one of USB transfer types.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.115-126
• /
• 1999

A two-dimensional Navier-Stokes solver using hybrid meshes is parallelized with a domain decompostion method. The focus of this paper is placed on minimizing the amount of effort in parallelizing the serial version of the solver, and this is achieved by adding an additional layer of cells to each decomposed domain. Most subroutines of the serial solver are used without modification, and the information exchange between neighboring domains is achieved using MPI(Message Passing Interface) library. Load balancing among the processors and scheduling of the message passing are implemented to reduce the overhead of parallelization, and the speed-up achieved by parallelization is measured on the transonic invisicd and turbulent flow problems. The parallelization efficiencies of the explicit Runge-Kutta scheme and the implicit point-SGS scheme are compared and the effects of various factors on the results are also studied.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.671-676
• /
• 2010

In this paper, an effort has been made to design and develop a meteorological data logger for meteorological purpose. This data logger is proposed to be included various sensor interface that used in weather sensors. Besides, numbers of meteorological process libraries are added into this data logger to make it able to perform as unattended weather monitoring system. Data output of this data logger are also design to support multiple protocol that commonly used in data logger, and several communication devices that commonly used in the market. Each data that logged will be logged together with date and time and able to retrieve via serial port using hyper terminal. It is also configurable via serial port.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.507-513
• /
• 2012

Objective: This study developed a hierarchy of conditions of applications(devices), situations and functions which are applicable to gesture interface. Background: Gesture interface is one of the promising interfaces for our natural and intuitive interaction with intelligent machines and environments. Although there were many studies related to developing new gesture-based devices and gesture interfaces, it was little known which applications, situations and functions are applicable to gesture interface. Method: This study searched about 120 papers relevant to designing and applying gesture interfaces and vocabulary to find the gesture applicable conditions of applications, situations and functions. The conditions which were extracted from 16 closely-related papers were rearranged, and a hierarchy of them was developed to evaluate the applicability of applications, situations and functions to gesture interface. Results: This study summarized 10, 10 and 6 conditions of applications, situations and functions, respectively. In addition, the gesture applicable condition hierarchy of applications, situation and functions were developed based on the semantic similarity, ordering and serial or parallel relationship among them. Conclusion: This study collected gesture applicable conditions of application, situation and functions, and a hierarchy of them was developed to evaluate the applicability of gesture interface. Application: The gesture applicable conditions and hierarchy can be used in developing a framework and detailed criteria to evaluate applicability of applications situations and functions. Moreover, it can enable for designers of gesture interface and vocabulary to determine applications, situations and functions which are applicable to gesture interface.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.427-436
• /
• 2018

HADAX is a serial communication converter of train control computer. It is connected with various signal equipments such as wayside signal equipments, station signal equipments, train control computers, and transmits control information and signal condition information for train control. And transmits information to several electronic interlocking devices through a splitter interface. Since HADAX interfaces with many signaling devices through serial communication, frequent communication connection faults necessitate improvement of performance such as dual system configuration, integration of external splitter, and multi-channelization of communication card. The improved HADAX device should have compatibility with the dimensions of existing enclosure and enclosure, and verify the performance of dual system and splitter integration. Therefore, we verified the performance of HADAX through the route control test, dual system test, and multi-channel communication test with splitter integrated connection by connecting with the existing signal equipment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1053-1061
• /
• 2008

In this paper, a moving target tracking using a binocular vision for an omni-directional mobile robot is addressed. In the binocular vision, three dimensional information on the target is extracted by vision processes including calibration, image correspondence, and 3D reconstruction. The robot controller is constituted with SPI(serial peripheral interface) to communicate effectively between robot master controller and wheel controllers.