• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.889-895
• /
• 2003

In this paper, we develop a PC adapter board and application software that do not use mouse or keyboard but the infrared communication, which can control the operation remotely. The infrared communication adapter is made up of the infrared receiver part and the serial communication interface part. The infrared receiver part creates a suitable scan-code using the received signal from the infrared transmitter (remote-controller). The serial communication interface part transmits the scan-code to PC by a serial communication. We implement its application softwares to listen to music and see movies. We can control their operations such as play, stop, pause and volume control remotely.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.437-444
• /
• 2022

This paper proposes a CRC error verification method for SPI and I2C buses of automotive semiconductors. In automotive semiconductors, when an error occurs in communication and an incorrect value is transmitted, fatal results may occur. Unlike LIN communication and CAN communication, in communication such as SPI and I2C, there is no frame for detecting an error, so some definitions of new standards are required. Therefore, in this paper, the CRC error detection mode is newly defined in the SPI and I2C communication protocols, and the verification is presented by designing it in hardware.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.337-341
• /
• 1991

Fieldbus is a low level serial digital network which will be used for factory automation. This paper describes lower layer implementation of a Fieldbus network interface. Physical layer provides hardware interface between IBM-PC and Fieldbus. Also, physical layer uses manchester coding, shielded twisted pair lines and RS-485 electrical standard. Data link layer includes Intel's iDCX96 real time executive for 8797 one chip microcontroller and Fieldbus data link protocol software.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.89-92
• /
• 2000

A wire communication module for PLC controller was developed. This system consists of RF module interface part, RS232 serial communication control part, LED display part and control S/W with GUI interface. RF communication frequency is controlled by PLL controlling and communication rate is also controlled as 1200 and 4800 bps. Communication and control status are displayed on LED. As a S/W part, graphic user interface on Window 95 O.S. was developed. To show the validity of the developed system, severial communication and control of PLC system were experemented.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.652-658
• /
• 2000

TCMS(Train Control ＆ Management System) control monitor and test the main on-board equipments including propulsion/brake unit by the serial transmission line. TCMS reduces interface circuits and number of train lines by the software logic and utilizing serial communication method. This paper describes the method of powering and braking control by TCMS software logic, and the software logic is verified by running test at Seoul Subway Line＃ 6. By running test result, we can see TCMS successfully control Powering/Braking of train

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.291-298
• /
• 1999

TCMS(Train Control ＆ Management System) is the management system of train information which intensively control, monitor and test the main on-board equipments including propulsion/brake unit by the serial transmission line. TCMS reduces interface circuits and number of train lines by the software logic and utilizing serial communication method. This paper describes the method of powering and braking control by TCMS software logic, in comparison with the powering/braking control by conventional relay logic/hardwire circuits, and the software logic was verified by simulation test with TCMS simulator.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.323-326
• /
• 2001

DTV 방송 신호를 수신하거나 송신하는 장비의 경우 대부분 한두 가지 인터페이스 방식을 이용하여 서로 통신을 하고 있다. 따라서 서로 다른 인터페이스 포맷을 사용하여 스트림을 전송하는 경우 기존의 장비를 사용하지 못하는 경우가 많이 있다. 본 논문에서는 이런 장비들 사이에서 주고받는 스트림의 포맷을 자유로이 연결 가능하도록 해주는 인터페이스를 설계 및 구현하였다. 본 논문에서 구현한 인터페이스는 스트림 자체 내용은 변경하지 않고, 송·수신하기 위한 인터페이스 규격에 스트림을 적용하여 자유로이 송·수신할 수 있도록 하였다. 구현한 인터페이스 규격은 SMPTE 310M, ASI(Asynchronous Serial Inerface), SPI (Synchronous Parallel Interface)와 셋탑박스에서 사용하는 TS(Transport Stream)의 네 가지로 서로간에 송·수신 가능하도록 매트릭스 형태를 취하고 있다. 주요 블록은 YHDL 코딩을 이용하여 설계를 하였으며, FPGA(EPF10K10T144)를 사용하였다.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.183-186
• /
• 2005

WUSB is a new technology which combines the speed and the security of wired USB with the easy use of wireless technology. In this paper, GUI for WUSB is designed and implemented to show the connectivity and contents of the WUSB devices. Also, the proposed GUI shows the log window while content transfers occur between the host and device. The proposed GUI can be used for various wireless technologies which provide wireless function with existing USB hosts and devices.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1185-1187
• /
• 2001

본 논문에서는 Motorola사의 MPC555마이크로프로세서를 탑재하여 개발한 제어보드가 소개된다. 이 보드를 사용하여 하이브리드 전기자동차의 발전기를 제어하는 실험을 수행하였다. MFC555는 전력시스템 제어에 필요한 다양한 입출력 장치를 내장하고 있어서 통합제어를 위한 one-chip solution을 가능하게 해 준다. MPC555는 내부 플래시 메모리가 비교적 대용량(448kbytes)이고 부동 소수점 연산이 가능하다. 또한 A/D 채널이 32개이고 SPI(Serial Peripheral Interface) 모듈 1개, SCI(Serial Communication Interface) 모듈 2개, CAN(Contol Area Network) 모듈 2개 등의 다양한 통신채널을 내장하고 있다. MPC555는 TPU(Time Processing Unit) 채널 32개로 다양한 timing function을 구현할 수 있게 해 준다. 개발된 제어 보드를 이용하여 하이브리드 전기자동차의 유도발전기 시스템에 대한 축소 시뮬레이션을 수행하였다.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.223-226
• /
• 2004

This paper presents a feasibility study of an advanced IO board design for the next generation of low-earth orbit satellites. Advanced IO board design includes sensor interface, NO, D/A, Digital Module, Serial Module etc, and allows to process increasing data rates between IO board and CPU board. The higher data rate involved in modem IO board additionally introduce issues such as noise, fault tolerance, command and data handling, limited pin count and power consumption problems. The experience in KOMPSAT-l and 2 program with this kind of problems resulted in using SMCS chip set, a high speed serial link technology based on IEEE-1355 (Space Wire Protocol) (ESA-ESTEC 2003, Parkes 1999), as a standard for next generation of satellite IO board design.