• Communications for Statistical Applications and Methods
• /
• 제29권2호
• /
• pp.151-160
• /
• 2022

The total system is composed of the main system (MS) and the failure detection equipment (FDE) which detects failures of MS. The analysis of system reliability is performed when the failure of FDE is possible. Several repair policies are considered to determine the order of repair of failed systems, which are sequential repair (SQ), priority repair (PR), independent repair (ID), and simultaneous repair (SM). The states of MS-FDE systems are represented by Markov models according to repair policies and the main purpose of this paper is to derive the system availabilities of the Markov models. Analytical solutions of the stationary equations are derived for the Markov models and the system availabilities are immediately determined using the stationary solutions. A simple illustrative example is discussed for the comparison of availability values of the repair policies considered in this paper.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.131-137
• /
• 2005

In this paper, we propose a Bayesian approach to determine the adaptive preventive maintenance(PM) policy for a general sequential imperfect PM model proposed by Lin, Zuo and Yam(2000) that PM not only reduces the effective age of the system but also changes the hazard rate function. Assuming that the failure times follow Weibull distribution, we adopt a Bayesian approach to update unknown parameters and determine the Bayesian optimal sequential PM policies. Finally, numerical examples of the optimal adaptive PM policy are presented for illustrative purposes.

• Clinical Pain
• /
• 제19권2호
• /
• pp.64-69
• /
• 2020

Ultrasound (US) imaging is an efficient, easy to use, rapid, dynamic, noninvasive, with rare side-effects and inexpensive tool allowing for facilitated diagnosis and management of the painful shoulder. It also has advantages over other imaging modalities in the evaluation of the postoperative shoulder for rotator cuff integrity and correct anchor and suture placement, as well as rotator cuff analysis following repair surgery. Early postoperative tendons frequently had a hypo- echoic echo texture and the absence of a fibrillar pattern, which might be misinterpreted as recurrent tears. however, these features often normalized into tendons with an increased echo texture and the reappearance of a fibrillar pattern at 6 months. Based on these sequential findings, the US findings within 3 months after surgery should be interpreted with caution to accurately understand and monitor the repaired tendon status.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.216-231
• /
• 2001

Several methods for improving device yields and characteristics have been studied by IC manufacturers, as the options for programming components become diversified through the introduction of novel processes. Especially, the sequential repair steps on wafer level and package level are essentially required in DRAMs to improve the yield. Several repair methods for DRAMs are reviewed in this paper. They include the optical methods (laser-fuse, laser-antifuse) and the electrical methods (electrical-fuse, ONO-antifuse). Theses methods can also be categorized into the wafer-level(on wafer) and the package-level(post-package) repair methods. Although the wafer-level laser-fuse repair method is the most widely used up to now, the package-level antifuse repair method is becoming an essential auxiliary technique for its advantage in terms of cost and design efficiency. The advantages of the package-level antifuse method are discussed in this paper with the measured data of manufactured devices. With devices based on several processes, it was verified that the antifuse repair method can improve the net yield by more than 2%~3%. Finally, as an illustration of the usefulness of the package-level antifuse repair method, the repair method was applied to the replica delay circuit of DLL to get the decrease of clock skew from 55ps to 9ps.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2818-2827
• /
• 2015

본 연구는 최근 뉴질랜드 Canterbury 지역에서 연속적으로 일어난 지진의 지진계 기록과 지리정보체계(GIS)의 정규크리깅을 이용하여 최대지반속도(PGV)와 기하평균최대지반속도(GMPGV) 컨투어를 생성하였고 이들의 공간적 패턴과 특징을 조사하였다. 지진발생 후 얻어진 데이터를 이용하여 지하의 상수도관 시스템의 성능에 주안점을 두고 연구를 수행하였다. 기하평균최대지반속도의 공간분포와 일시적인 지반거동으로 인하여 발생된 상수도관 시스템의 GIS 중첩과 비액상화지역의 기하최대지반속도와의 관계를 통하여 서로 다른 재질의 상수도관에 따른 1 km 당 매설된 상수도관 손상 개수로 산정되는 손상율을 산정하였다. 또한, 본 연구는 매설된 상수도관의 지진성능을 요약하여 설명하였다.

• Archives of Plastic Surgery
• /
• 제42권4호
• /
• pp.424-430
• /
• 2015

Background Reconstruction of combined orbital floor and medial wall fractures with a comminuted inferomedial strut (IMS) is challenging and requires careful practice. We present our surgical strategy and postoperative outcomes. Methods We divided 74 patients who underwent the reconstruction of the orbital floor and medial wall concomitantly into a comminuted IMS group (41 patients) and non-comminuted IMS group (33 patients). In the comminuted IMS group, we first reconstructed the floor stably and then the medial wall by using separate implant pieces. In the non-comminuted IMS group, we reconstructed the floor and the medial wall with a single large implant. Results In the follow-up of 6 to 65 months, most patients with diplopia improved in the first-week except one, who eventually improved at 1 year. All patients with an EOM limitation improved during the first month of follow-up. Enophthalmos (displacement, 2 mm) was observed in two patients. The orbit volume measured on the CT scans was statistically significantly restored in both groups. No complications related to the surgery were observed. Conclusions We recommend the reconstruction of orbit walls in the comminuted IMS group by using the following surgical strategy: usage of multiple pieces of rigid implants instead of one large implant, sequential repair first of the floor and then of the medial wall, and a focus on the reconstruction of key areas. Our strategy of step-by-step reconstruction has the benefits of easy repair, less surgical trauma, and minimal stress to the surgeon.

• 한국시뮬레이션학회논문지
• /
• 제20권3호
• /
• pp.119-127
• /
• 2011

전면정비란 일정기간동안 사용한 장비(기계, 설비 등)를 부품 단위로 분해하여 부품별로 수리를 한 후 재조립하는 과정을 의미다. 전면정비는 주로 항공기, 선박, 철도차량, 무기체계, 중장비 등과 같이 수명이 길고 고가인 장비를 운영하는 과정에서 발생한다. 이러한 정비 사업에서는 리드타임(Lead Time)을 단축시키는 것이 중요하며, 납기에 맞추어 정비를 완료할 수 있도록 생산시스템을 설계하는 것이 주요 관심사이다. 본 논문에서는 전면정비를 하는 정비 공장을 대상으로 3D시뮬레이션 도구인 $QUEST^{TM}$를 이용하여 시뮬레이션을 수행한 사례를 소개한다. 먼저 전면정비 공장의 공정특성과 시뮬레이션 모델 구축시 고려해야 하는 사항들을 중점적으로 설명하였다. 그리고 흐름생산방식과 셀생산방식 등 두 가지 해체작업 방식을 포함한 다양한 시뮬레이션 시나리오에 대해 시뮬레이션 실험을 통한 분석결과를 제시하였다.

• 응용통계연구
• /
• 제26권1호
• /
• pp.111-118
• /
• 2013

이 논문에서는 고장감지장치(FDE)가 시스템 가용도에 미치는 영향을 연구한다. 주시스템(MS) 수리 도중에 고장이 발생한 FDE를 수리하기 위한 새로운 수리 정책을 고려한다. 이 논문의 주요 목적은 MS의 가용도를 계산하고 비교하는 데에 있다.

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 1996년도 정기총회 및 학술발표회
• /
• pp.18-18
• /
• 1996

Bacteriophage T4 endonuclease V initiates the repair of ultraviolet (UV)-induced pyrimidine dimer photoproducts in duplex DNA. The mechanism of DNA strand cleavage involves four sequential steps: linear diffusion along dsDNA, pyrimidine dimer-specific binding, pyrimidine dimer-DNA glycosylase activity, and AP lyase activity. (omitted)

• 한국시뮬레이션학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2000

When a new manufacturing line is constructed, its production capacity can be substantially affected in its design stage. Computer simulation often provides better design by evaluating feasible alternatives. In this paper we study an automobile engine manufacturing line which is under construction. Three alternatives are considered in the design; (1) to use machining tools of longer life; (2) to reassign the buffer space to each sequential processes while maintaining the same total buffer length; and (3) to reduce the machine repair time to 30 minutes using TPM and maintenance team. Simulation results using AutoMod indicates that employing the three alternatives will save about 1.5 million dollars per year.