• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.177-184
• /
• 2008

In this study, in order to reduce appeals regarding vibration and noise from blasts, the optimum delay-time of the electronic detonator, which can minimize blast vibration, is found through blast-waveform composition and blasting simulation, and we have developed the full-face Sequential Blasting Method based on the studies of damping properties of full-face section blasting. The optimum delay-time of the electronic detonator and Full-face Sequential Blasting Method using electronic detonator was applied to the Gyeongbu high-speed railway construction site to test the feasibility of this method.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.108-114
• /
• 2001

Petri nets have been introduced as a powerful analyzing and design tool for the discrete systems such as sequential control systems. However, one of the important problems in its applications is that the model can be analyzed hardly when we deal with large scale systems because of increase of the number of Petri net components. To overcome this problem, some methods for dividing or reducing of Petri net have been suggested. In this paper, an approach for hierarchical expression of Petri net based on Sequential function Chart(SFC) and Bottom Up oriented Mehodology(BUM) is proposed. Especially, some definitions and rules are defined in order to divide and compose sub Petri nets. A measuring tank system will be described as a typical kind of discrete systems and modeled by some sub Petri nets based on the SFC and BUM by the proposed method in this paper.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.26-31
• /
• 2001

Petri nets(PN) have been introduced as a poweful analyzing and design tool for the discrete systems such as sequential control systems. However, one of the important problems in its applications is that the model can not be analyzed easily when we deal with large scale systems because of increase of the number of components of the systems. To overcome this problem, some methods for dividing or reducing of PN have been suggested. In this paper, an approach for hierarchical expression of PN based on Sequential Function Chart(SFC) and Bottom Up oriented Mehodology(BUM) is proposed. Especially, some definition and rules are defined in order to divide and compose sub PN. A measuring tank system will be described as a typical kind of discrete systems and modeled by some sub PN based on the SFC and BUM by the proposed method in this paper.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.231-237
• /
• 2008

Biodegradable poly($\varepsilon$-caprolactone-co-L-lactide)-b-poly(ethylene glycol) (PCLA-b-PEG) copolymers were synthesized via solution polymerization by varying the feed composition of $\varepsilon$-caprolactone ($\varepsilon$-CL) and L-lactide (LLA) ($\varepsilon$-CL: LLA= 10:0, 7:3, 5:5, 3:7, 0: 10). The feed ratio based on weight is in accordance with the copolymer composition except for the case of $\varepsilon$-CL: LLA=3:7 (C3L7), which was verified by $^1H$-NMR. Two different approaches were used for the exceptional case, which is an extension of the reaction time or the sequential introduction of the monomer. A copolymer composition of $\varepsilon$-CL: LLA=3:7 could be obtained in either case. The chemical microstructure of PCLA-b-PEG was determined using the $^{13}C$-NMR spectra and the effect of the sequential structure on the thermal properties and crystallinity were examined. Despite the same composition ratio of the copolymer, the microstructure can differ according to the reaction conditions.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.153-158
• /
• 2003

Catalytic Combustion used to be applied to specific conditions because of the characteristics different from flame combustion. However, many researches are focused on widening the applicant range of catalytic combustion with the competences of catalytic combustion. The development of many catalytic combustion appliances is one of the trials to overcome the restrictions of reaction and maximize the merits. In this research, past developments of appliances are depicted and new conceptual system will be introduced - sequential system. Sequential catalytic combustion system is composed of units - existing catalytic heat exchangers. This system is performed with parallel in composition and serially in operation. First, the burden of the preheating can be dramatically reduced. Second, stable operation control is expected. Lastly, Capacity expansion is flexible.

• KIISE Transactions on Computing Practices
• /
• v.23 no.12
• /
• pp.698-702
• /
• 2017

Since the introduction of Deep Neural Networks to the Natural Language Processing field, two major approaches have been considered for modeling text. One method involved learning embeddings, i.e. the distributed representations containing abstract semantics of words or sentences, with the textual context. The other strategy consisted of composing the embeddings trained by the above to get embeddings of longer texts. However, most studies of the composition methods just adopt word embeddings without consideration of the optimal embedding unit and the optimal method of composition. In this paper, we conducted experiments to analyze the optimal embedding unit and the optimal composition method for modeling longer texts, such as documents. In addition, we suggest a new discourse-based composition to overcome the limitation of the sequential composition method on composing sentence embeddings.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.3
• /
• pp.397-410
• /
• 2023

This study examined the efficacy of various chlorinating agents in partitioning light water reactor spent fuel, with the aim of optimizing the chlorination process. Through thermodynamic equilibrium calculations, we assessed the outcomes of employing MgCl₂, NH₄Cl, and Cl₂ as chlorinating agents. A comparison was drawn between using a single agent and a sequential approach involving all three agents (MgCl₂, NH₄Cl, and Cl₂). Following heat treatment, the utilization of MgCl₂ as the sole chlorinating agent resulted in a moderate separation. Specifically, this method yielded a solid separation with 96.9% mass retention, 31.7% radioactivity, and 44.2% decay heat, relative to the initial spent fuel. In contrast, the sequential application of the chlorinating agents following heat treatment led to a final solid separation characterized by 93.1% mass retention, 5.1% radioactivity, and 15.4% decay heat, relative to the original spent fuel. The findings underscore the potential effectiveness of a sequential chlorination strategy for partitioning spent fuel. This approach holds promise as a standalone technique or as a complementary process alongside other partitioning processes such as pyroprocessing. Overall, our findings contribute to the advancement of spent fuel management strategies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1490-1495
• /
• 2006

The purpose of this research was to develop an optimum composition model for a new synbiotic fermented dairy product with high probiotic cell counts, and to experimentally verify this model. The optimum composition model indicated the growth promoter ratio that could provide the highest growth rate for probiotics in this fermented product. Different levels of growth promoters were first blended with milk to improve the growth rates of probiotics, and the optimum composition model was determined. The probiotic viabilities and chemical properties were analyzed for the samples made using the optimal formula. The optimal combination of the growth promoters for the synbiotic fermented milk product was 1.12% peptides, 3% fructooligosaccharides (FOS), and 1.87% isomaltooligosaccharides (IMO). A product manufactured according to the formula of the optimum model was analyzed, showing that the model was effective in improving the viability of both Lactobacillus spp. and Bifidobacterium spp.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.301-314
• /
• 2000

Marine surface sediments in the vicinity of Samcheonpo coal-fired power plant were analyzed by a total analysis($HF+HNO_3+HClO_4$) and sequential extraction procedure for heavy metals in order to investigate the total concentrations and geochemical phases of heavy metals. The result showed that the concentrations of Cr, Cu, Fe and Zn were within ranges typical for coastal areas, which reflected the mineralogical composition of the sediments in the studied area. However, the distributions of Cd, Co, Mn, Ni and Pb were rather different from the former, indicating that these heavy metals had a different origin, or that they were affected by a different geochemical mechanism. Chemical partitioning of heavy metals using sequential extraction procedure revealed that Cu, Fe, Pb, Zn were significantly bound to the residual phases of the sediments, whereas carbonate phases contained considerable amounts of Mn. The significant association of Pb with the exchangeable fraction also indicated that Pb was more mobile and bioavailable than Cu, Fe, Mn, Zn.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.783-794
• /
• 2001

This research focuses its study on the expressions of the visual images of the fashion illustration as a part of visual art and utilizes it to formulate the theoretical basis. Main findings of our research are as follows: The structure of communications in the fashion illustration is based on the four elements. They are the expression of the texture, drawings, composition, and the human body and dress. The characteristics in expression of texture level in fashion illustration can be the expression of creative texture in pattern or crease, and also can be expressed as various collage and photomontage by computer graphics. Secondly, the analysis on the characteristics of the drawings show that the drawing skills are imagination and sequential drawings. Thirdly, the characteristics of composition method are mainly shown as the application of plane composition which was previously used in avant-garde arts. Fourthly, most of the human body in the fashion illustrations are shown as the results of simplification, exaggeration and deformation in human body and also expressed or analyzed by the method of the body modification. Based on the above findings of this research we conclude that the way of expression in the fashion illustration is very similar in its composition as in visual art. However, they also show differences between the two in expression method or the method for the image development in specific expressions.