• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.324-331
• /
• 2016

The present study focuses on the characteristics of a supersonic jet flowing from a rectangular nozzle exit on a flat plate. Flow visualization techniques using schlieren and kerosene-lampblack tracing are utilized to investigate shock reflection structures and boundary-layer separations over a flat plate. Wall pressure measurements are also carried out to quantitatively analyze the flow structures. All observations are repeated for multiple jet flow boundary conditions by varying the flap length and nozzle pressure ratio. The experimental results show that the jet flow structures over the flat plate are highly three-dimensional with strong bleeding flows from the plate sides, and that they are sensitive to plate length and nozzle pressure ratio. A multi-component force measurement device is also utilized to observe the characteristics of the jet flow thrust vectoring over the plate. The maximum thrust deflection angle of the jet is about $8^{\circ}$, demonstrating the applicability of thrust vector control via a flat plate installed at the nozzle exit.

• KSBB Journal
• /
• 제27권4호
• /
• pp.207-214
• /
• 2012

Emulsions are mixture of immiscible liquids in which one is dispersed in all over the other. They have been applied to many applications including cosmetics, foods, drug delivery system (DDS), fine chemicals, and chemical separations. Especially, emulsion technology is one of the most useful technique to formulate cosmetics such as eye cream, foundation, and foam cleansing. In general, the emulsions can be generated by mechanical agitation of two immiscible fluids. However, the emulsions obtained by conventional method have limited in stability, monodispersity, and complicate process. We describe here preparation techniques of representative cosmetic emulsions such as liposome, liquid crystal emulsion, nanoemulsion, multiple emulsion, and pickering emulsion. Furthermore, various factors which can control the physical properties of each cosmetic emulsions are briefly discussed.

• Applied Microscopy
• /
• 제39권2호
• /
• pp.175-183
• /
• 2009

이 논문에서 50 pm 이하의 원자열 분해상을 효과적으로 보여 주는 결정 밑 표면 파동함수(EPW)의 음(-)의 2차 도함수의 시뮬레이션 영상들이 나타나 있다. 그리고 해당 EPW는 HRTEM에서 일련의 비 초점 단계의 관찰 영상으로부터 얻을 수 있다. 이 논문에 나타난 시뮬레이션한 영상들은 대체로 50 pm 이하의 원자열 간격을 주는 Si과 InAs의 [114] 및 [116] 방위 축에 대한 것이다. 이 방법의 정당성에 대한 이론적 이유가 운동학적 회절이론을 기초로 한 분석에서 주어졌다. 그리고 그 응용성의 한계도 논의되었다.

• Natural Product Sciences
• /
• 제12권1호
• /
• pp.55-61
• /
• 2006

A description of simple, isocratic and precise reversed phase HPLC methods is given for simultaneous quantification of pholcodine and ephedrine hydrochloride together with either carbinoxamine maleate or terfenadine in antitussive-antihistaminic oral pharmaceutical formulations. Separations were carried out on X-Terra and symmetry shield C18 column $(250\;{\times}\;4.6\;mm,\;5\;{\mu}m)$. The used isocratic elution systems were either $0.02\;M\;KH_2PO_4-acetonitrile$ in the ratio of 75 : 25 and pH adjusted to 7.70 with orthophosphoric acid or sodium hydroxide, for syrup (method A), or 0.02 octanesulphonic acid sodium salt solution-acetonitrile-acetic acid in the ratio of 75 : 25 : 0.5 for suspension (method B). The elution of both mixtures was achieved with a flow rate of 1 ml/min. Detection was carried out by UV absorbance at wavelengths of 220 and 250 nm for syrup and suspension, respectively. The quantification of the components in synthetic mixtures and actual syrup and suspension were calculated using the internal standard technique with metoclopramide HCl and codeine phosphate as internal standards (IS), respectively. The methods, for both mixtures, were validated and met all the requirements for the quality control analysis recommended by FDA and ICH.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 추계 총회 및 학술발표회
• /
• pp.58-58
• /
• 1993

Pervaporation has become important as a method to separate liquid mixtures, sepecially azeotropic and close boiling-point mixtures. Especially, water-alcohol separations have been carried out a lot because of the practical interests in the industries. However, outstanding membranes with high selectivity and high permeability have not been available in common use yet. In order to separate selectively out the water mixed with alcohols with an aim of the purification of the alcohols, a membrane has tO have excellent affinity to water. Among the hydrophilic polymers, polyacrylic acid and poly(vinyl alcohol) are used widely. In recent years, ionomers and polyion complexes, better hydrophitic materials, start to be used. The polyion complex membranes, consisting of polyacrylic acid (PAA) and polycation, showed excellent permeation rates and selectivities. It was known that among the polycations, ioneries, which have quaternary ammonium groups in the backbone chain, were more effective in giving membranes of higher permselectivities. On this base, syntheses and characterizations of the polycations, with different chemical structures from the published ones, for the polyion complex membrane formation were studied in this paper.

• International Journal of Fluid Machinery and Systems
• /
• 제3권3호
• /
• pp.260-270
• /
• 2010

Reducing the losses of the tip clearance flow is one of the keys in an unshrouded centrifugal compressor design and development because tip clearances are large in relation to the span of the blades and also centrifugal compressors produce a sufficiently large pressure rise in single stage. This problem is more acute for a low flow high-pressure ratio impeller design. The large tip clearance would cause flow separations, and as a result it would drop both the efficiency and surge margin. Thus a design of a high efficiency and wide operation range low flow coefficient centrifugal compressor is a great challenge. This paper describes a recent development of high efficiency and wide surge margin low flow coefficient centrifugal compressor. A viscous turbomachinery optimal design method developed by the authors for axial flow machine was further extended and used in the centrifugal compressor design. The compressor has three main parts: impeller, a low solidity diffuser and volute. The tip clearance is under a special consideration in this design to allow impeller insensitiveness to the clearance. A patented three-dimensional low solidity diffuser design method is used and applied to this design. The compressor test results demonstrated to be successful to extend the low solidity diffusers to high-pressure ratio compressor. The compressor stage performance showed the total to static efficiency of the compressor being about 85% and stability range over 35%. The test results are in good agreement with the design.

• 오토저널
• /
• 제3권2호
• /
• pp.18-26
• /
• 1981

The purpose of this paper is to study the possibility of practical use of gasoline-methanol mixed fuel as an alternative fuel of gasoline engines in the light of engine performances and harmful exhaust emissions as well as mixings and separations of the mixed fuels. When the methanol of 99.8% purity is mixed with super or regular gasoline available on the market today, the experimental results obtained without modifying carburetor in this study are as follows; 1.The separation ratio depends upon the gasoline-methanol mixing ratio only, regardless of fuel temperature and fuel additives for preventing separation of phase. 2.The critical absorption ratio is affected by the gasoline-methanol mixing ratio, its temperature and the quantity of fuel additives. 3.Concerning the distillation temperature, the initial point of all sorts of fuels is almost same,but 10% point and 35-60% point of mixed fuels are lower than those of gasoline only. 4.In case of throttle valve opening set, engine output using the mixed fuels is decreased compared to gasoline, but thermal efficiency is increased as a consequence of decreasing specific energy consumption. 5.In case of fixed load test, thermal efficiency is increased at low engine speed even under low part-load as well as under comparatively high part-load including full load. 6.CO and NOx emissions are reduced remarkably with the mixed fuels.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.786-791
• /
• 2007

고속열차의 속도가 300km/h 이상이 되면 난류의 박리나 와류발산 등에 의한 공력소음의 영향이 지배적이 된다. 본 연구에서는 KTX와 한국형고속열차의 외부에서 발생하는 공력소음, 특히 차간 공간에서 발생하는 소음의 특성을 시험을 통해 규명한다. 차량 실내외의 소음 측정을 통해 이 소음의 특성을 분석하였고, 풍동시험을 통해 머드플랩 사이의 틈의 크기가 저주파 소음 발생에 직접적인 영향을 준다는 것을 규명하였다. 또한 마이크로폰어에이 시험으로 고속열차의 외부에서 발생하는 소음의 주파수 특성을 분석하였다.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.431-439
• /
• 2006

Due to the limitation of size of the test section, blockage effects could not be avoided in the model test of yacht sails for common wind tunnels. In this paper, a numerical analysis is performed to investigate the blockage effects on the lift and drag forces measured from wind tunnel experiments for a 30 feet sloop yacht sail. Complex airflows around the jib and main sails including three-dimensional flow separations are calculated for various close-hauled conditions. It is found that the blockage of a wind tunnel changes the flow separation and consequently the lift and drag forces of the sails, especially the main sail, reduce and increase, respectively, due to the blockage effects.

• Fisheries and Aquatic Sciences
• /
• 제5권4호
• /
• pp.311-313
• /
• 2002

Proteolytic activity of live Uronema manum was analyzed by fluorescence polarization (FP) technique. Protease activity was measured by a decrease in FP value using fluorescein isothiocynate (FITC)-casein as a protein substrate. The results demonstrated an inverse linear relationship between fluorescence polarization (FP) values and live ciliate concentration over the range $1\times10^4\;to\;2\times10^5$ cells/well. However, the FP values of $10-10^3$ live parasites were not different significantly from that of control. Time-dependent decrease in FP value was shown in the wells containing live U. marinum. In the present study, FP assay had the benefit to provide measurements of substrate hydrolysis by live parasites in real-time, and did not require separations, precipitations, or transfers of reaction mixture.