• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.521-537
• /
• 2016

Laboratory-scale experiments were carried out to investigate the adsorption equilibrium, the adsorption kinetics and facilitated transport of two cationic dyes (Methylene Blue (MB) and Rhodamine B (RB)) on Polymer Inclusion Membrane (D2EHPA-PIM). Different adsorption isotherms (Freundlich, Langmuir and Temkin models) as well as kinetics models indicated that the adsorption process is spontaneous and exothermic. Under the optimal conditions, the adsorption removal efficiencies reach about 93% and 97% for MB and RB respectively. Different extraction values by D2EHPA-PIM were obtained for the two cationic dyes: MB is weakly extracted at pH 2.0 (E% = 18.7%) whilst E% = 82.4% was observed for RB at the same pH. This difference was exploited in a mixture containg both the 2 cationic dyes for the selective extraction of RB at pH 2. Desorption of both dyes was achieved from the membrane by using acidic aqueous solutions and desorption ratio up to 90% was obtained. The formulas of the extracted complexes by the PIMs were, determined by the method of slopes. The dyes transport was elucidated using mass transfer analysis where in it found relatively high values of the initial flux ($J_0$) as 41.57 and $18.74{\mu}mol.m^2.s^{-1}$ for MB and RB respectively.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.474-478
• /
• 2013

The most general photocatalyst, $TiO_2$ and $WO_3$, are acknowledged to be ineffective in range of visible light. Therefore, many efforts have been directed at improving their activity such as: band-gap narrowing with non-metal element doping and making composites with high specific surface area to effectively separate electrons and holes. In this paper, the method was introduced to prepare a photo-active catalyst to visible irradiation by making a mixture with $TiO_2$ and $WO_3$. In the $TiO_2-WO_3$ composite, $WO_3$ absorbs visible light creating excited electrons and holes while some of the excited electrons move to $TiO_2$ and the holes remain in $WO_3$. This charge separation reduces electron-hole recombination resulting in an enhancement of photocatalytic activity. Added Ag plays the role of electron acceptor, retarding the recombination rate of excited electrons and holes. In making a mixture of $TiO_2-WO_3$ composite, the mixing route affects the photocatalytic activity. The planetary ball-mill method is more effective than magnetic stirring route, owing to a more effective dispersion of aggregated powders. The volume ratio of $TiO_2(4)$ and $WO_3(6)$ shows the most effective photocatalytic activity in the range of visible light in the view point of effective separation of electrons and holes.

• 한국수자원학회논문집
• /
• 제35권1호
• /
• pp.109-124
• /
• 2002

본 연구는 간헐 수문사상인 시간강수계열의 구조적 특성을 고찰하여 강수발생의 군집성을 고려한 강수발생과정에 대한 추계학적 모의발생 모형을 개발한 것이다. 먼저 강수사상의 발생패턴을 기술하기 위해 Poisson 군집과정을 사용하였고, 이 과정에서 군집간의 시간과 군집내의 사상 수는 지수분포로 기술하였다. 둘째로 사상의 지속기간과 군집내에서 사상간의 시간은 음대수혼합분포로 기술하였다. 마지막으로 이상과 같은 시간강수사상의 발생패턴과 사상기간내의 강수의 종속구조를 구명하기 위해 서울을 대상으로 하여 실적강수자료를 분석하였다. Monte Carlo 모의결과는 모형이 강수발생의 계절적 패턴, 사상특성의 주변 및 조건부 분포를 잘 재현하고 있음을 보여주었다.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.249-256
• /
• 2016

Porous $Al_2O_3$ hollow fiber membranes were successfully prepared by dry-wet spinning/sintering method. The SEM image shows that the $Al_2O_3$ hollow fiber membrane consists mostly of sponge pore structure. The contact angle and the breakthrough pressure were $126^{\circ}$ and 1.91 bar, respectively. This results indicate that the $Al_2O_3$ hollow fiber membranes were successfully modified to hydrophobic surface. The hydrophobic modified $Al_2O_3$ hollow fiber membranes were assembled into a membrane contactor system to separate $CO_2$ from a model gas mixture of the flue gas at elevated gas velocity. The $CO_2$ absorption flux was enhanced when the gas velocity increased from $1{\times}10^{-3}$ to $6{\times}10^{-3}$ m/s. Whereas the $CO_2$ absorption flux was decreased with the number of hollow fiber membrane of a module because of the concentration polarization. Furthermore, we developed an lab-scale $Al_2O_3$ hollow fiber membrane contactor modules and their system (i.e., $CO_2$ absorption using the $Al_2O_3$ membrane and monoethanolamine (MEA)) that could dispose of over $0.02Nm^3/h$ mixture gas (15% $CO_2$) with the removal efficiency higher than 95%. The results can be useful in a field of the membrane contactor for $CO_2$ separation, helping to design and extend a equipment.

• 멤브레인
• /
• 제20권1호
• /
• pp.62-68
• /
• 2010

Cermet 분리막 제조를 위한 혼합 분말은 60 vol.% vanadium과 $Y_2O_3$-stabilized $ZrO_2$ (YSZ)를 기계적으로 혼합하여 준비하였다. 혼합 분말을 원판으로 압축한 후 진공 분위기에서 $1600^{\circ}C$로 2시간동안 소결하였다. 소결 분리막은 치밀하였고, 브레이징 필러를 이용하여 스테인레스 링에 장착되었다. V/YSZ 분리막의 수소 투과량은 100% 수소를 흘려 $200{\sim}350^{\circ}C$ 범위에서 측정되었다. $350^{\circ}C$, 0.5 bar압력에서 분리막의 양 표면에 균열이 형성되었다. 투과실험 동안에 V/YSZ 분리막의 vanadium은 수소와 반응하여 $V_2H$를 생성하였으며, 이로 인해 분리막이 균열되는 것을 알 수 있었다.

• 자원리싸이클링
• /
• 제26권3호
• /
• pp.47-52
• /
• 2017

중액선별(HMS, heavy medium separation)을 통해 회수된 인운모(lepidolite) 정광(Li: 2.3%)으로부터 리튬을 수 침출하기 위해 황산칼슘 반수화염(CSH, calcium sulfate hemihydrate, $CaSO_4{\cdot}1/2H_2O$)과 혼합분쇄하여 기계화학적 효과를 연구하였다. 인운모를 CSH와 함께 고강도 분쇄한 결과, 리튬의 침출율이 4.48%에서 93.5%로 급격히 증가하였다. 이는 고강도 혼합분쇄 과정 중 발생되는 기계화학적 효과로 인해 결정구조가 파괴되면서 인운모와 CSH의 혼합물이 새로운 화합물로 형성되어 나타난 결과로 판단된다. 결과적으로 인운모로부터 상온에서 리튬의 수 침출이 가능함을 확인하였다.

• 멤브레인
• /
• 제30권6호
• /
• pp.385-394
• /
• 2020

기체분리공정에서 사용되는 분리막은 높은 기체 투과 및 분리성능과 고온·고압 조건에서 높은 안정성을 보여야 한다. 하지만 고분자분리막(특히, 유리상 고분자)은 응축 가능한 기체 분자(예를 들어, CO2, H2S, hydrocarbon 등)에 노출되면 고분자 사슬이 부풀어 오르는 가소화 현상을 보여 안정성 측면에서 한계를 보인다. 이러한 가소화 현상은 고압의 복합기체 분리공정에서 선택도를 감소시켜 장기적으로는 고분자분리막이 분리공정에 도입될 수 없는 문제를 가져온다. 이러한 가소화 현상 문제를 해결하기 위해서 분리막 연구자들은 분리막 열처리, 고분자 혼합, 고분자구조의 열적 재배열, 혼합매질분리막 제작, 가교화 방법 등을 통하여 분리막의 가소화 저항을 향상시켰다. 본 총설에서는 고분자 분리막의 가소화 저항의 개념 및 현상에 대해서 알아보고 이를 해결할 수 있는 인자들과 그와 연관된 연구들을 살펴보도록 할 것이다.

• 멤브레인
• /
• 제29권2호
• /
• pp.67-79
• /
• 2019

고순도 프로필렌(프로펜)은 옥탄가를 높이는 화합물이며 산업적으로 중요한 화합물들의 원료가 된다. 프로판 혼합물로부터 프로펜을 정제하는 것은 비슷한 끓는점으로 인해 기술적으로 어려우며, 큰 비용이 요구된다. ZIF-8 분리막은 분자체 메커니즘에 의해 효율적으로 프로판으로부터 프로필렌을 분리할 수 있는 가능성 때문에 많은 연구가 진행되고 있다. ZIF-8 분리막에 대한 관심이 커지는 것은 소위 "gate opening" 효과 때문이다. 프로필렌/프로판 혼합물로부터 프로필렌 분리를 높이기 위해 "gate opening" 효과는 분리막 기공을 확장시켜 더 크고 무거운 프로판은 피드 흐름에 유지시키며, 프로필렌만 선택적으로 투과할 수 있도록 한다. 본 논문에서는 ZIF-8 분리막 제조에 널리 적용되는 방법들과 분리막을 통한 프로필렌 투과도 및 선택도에 영향을 주는 인자들에 대해 살펴보고자 한다.

• 한국초지조사료학회지
• /
• 제17권1호
• /
• pp.27-34
• /
• 1997

This experiment was carried out to determine growth characteristics, dry matter (DM) yield, seasonal yield distribution and nutritive value of early- and late maturity orchardgrass, 1990 to 1992. The cultivars used in this study were Potomac, Hallmark (early maturing cultivar) and Lidacta, Rancho (late maturing cultivar), and a mixture plot (Potomac 25% + Hallmark 25% + Lidacta 25% + Rancho 25%) was involved. The seeding rate was 20 kgha in all treatments. Plant height of Potomac and Hallmark was longer than that of Lidacta and Rancho. The dates of initial heading and 50% heading of early maturing cultivars (Apr. 30 and May 10) were 10 days earlier than those of late matuing cultivars. Potomac and Hallmark were upright, and Lidacta and Rancho were semi-upright type, and severe disease and weeds (30 ~ 40%) were observed at Lidacta plot. On an average of three years, the DM yields of Potomac (10,549 kglna), Hallmark (10,435 kg) and mixture (10,356 kg) were significantly (P<0.05) higher than those of Rancho (9,457 kg) and Lidacta (8,218 kg). However, seasonal yield distribution of late maturing cultivars was better than that of early maturing cultivars. The contents of crude protein, crude fat, crude fiber, nitrogen %ee extract, aude ash, neutral detergent fiber, P, K, Ca, and Mg were not significantly different between cultivars, but higher aude protein yield was found at Potomac, Hallmark and mixture plots. Based on the above results, it may be concluded that early maturing cultivars for high productivity, late maturing cultivars for seasonal yield distribution, and seeding of mixture andlor separation of early- and late maturing cultivars are recommended. Also Lidacta was a not promising cultivar due to low productivity, severe disease, and high weeds development.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.69-76
• /
• 2018

PURPOSES : This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed. METHODS : First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content. RESULTS : After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at $60^{\circ}C$ for two days. CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).