• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.124-129
• /
• 1992

The goal of the proposed Intelligent Assisting System - IAS is to assist human operators in an intelligent way, while leaving decision and goal planning instances for the human. To realize the IAS the very important issue of manipulation skill identification and analysis has to be solved, which then is stored in a Skill Data Base. Using this data base the IAS is able to perform complex manipulations on the motion control level and to assist the human operator flexibly. We propose a model for manipulation skill based on the dynamics of the grip transformation matrix, which describes the dynamic transformation between object space and finger joint space. Interaction with a virtual world simulator allows the calculation and feedback of appropriate forces through controlled actuators of the sensor glove with 10 degrees-of-freedom. To solve the sensor glove calibration problem, we learn the nonlinear calibration mapping by an artificial neural network(ANN). In this paper we also describe the experimental system setup of the skill acquisition and transfer system as a first approach to the IAS. Some simple manipulation examples and simulation results show the feasibility of the proposed manipulation skill model.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.789-797
• /
• 2004

The nanoscale sensing and manipulation have become a challenging issue in micro/nano-robotic applications. In particular, a feedback sensor-based manipulation is necessary for realizing an efficient and reliable handling of particles under uncertain environment in a micro/nano scale. This paper presents a piezoresistive MEMS cantilever for nanoscale force measurement in micro robotics. A piezoresistive MEMS cantilever enables sensing of gripping and contact forces in nanonewton resolution by measuring changes in the stress-induced electrical resistances. The calibration of a piezoresistive MEMS cantilever is experimentally carried out. In addition, as part of the work on nanomanipulation with a piezoresistive MEMS cantilever, the analysis on the interaction forces between a tip and a material, and the associated manipulation strategies are investigated. Experiments and simulations show that a piezoresistive MEMS cantilever integrated into a micro robotic system can be effectively used in nanoscale force measurements and a sensor-based manipulation.

• Journal of Sensor Science and Technology
• /
• v.25 no.4
• /
• pp.291-296
• /
• 2016

The ideal chemical sensor must show the similar result under the same condition for accurate measurement of gases regardless of time. However, the actual responses of chemical sensors have been shown the lacks of repeatability and reproducibility because of the drift which has been caused by aging and pollution of the sensor and the environment change such as temperature and humidity. If the problems are not properly taken into considerations, the stability and reliability of the system using chemical sensors would be decreased. In this paper, we analyzed the sensor's drift and applied the three different compensation methods(DWT( Discrete Wavelets Transform), Baseline Manipulation, Internal Normalization) for reducing the effects of the drift in order to improve the stability and the reliability of short term of the chemical sensors. And in order to compare the results of the methods, the standard deviation was used as a criterion. The sensor drift was analyzed by a trend line graph. We applied the three methods to the successive data measured for three days and compared the results. As a result of comparison, the standard deviation of DWT showed lowest value. (Before compensation: 7.1219, DWT: 1.3644, Baseline Manipulation: 2.5209, Internal Normalization: 3.1425).

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2445-2450
• /
• 2003

Recently, biological technology industry shows great development. Instruments and systems related biological technology have been developed actively. In this paper, we developed a new micro end-effector for biological cell manipulation. The existing micro end-effector for biological cell manipulation has not any force sensing mechanism. Usually, excessive contact force occurring when the end-effector and a cell collide might make a damage on the cell. However, unfortunately, user can not notice the condition in case of using the existing end-effector. In order to overcome we proposed the improved micro end-effector having a force sensing mechanism. This paper presents the design concepts of the new micro end-effector. We carried out calibration of the force sensor and tested the performance of the proposed micro end-effector. Through a series of experiments the new micro end-effector shows the possibility of application for precision biological cell manipulation such as DNA operation

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.899-900
• /
• 2012

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2162-2167
• /
• 2014

Robots are widely used in various automation processes in industrial applications. Traditionally, it operated under fixed condition by teaching operating positions. Recently, diverse 2D/3D sensors are used together with robot to give more flexibility in operation. In this paper, we deal with automatic manipulation of tie rod in automotive production line. Sensor system consisted of a camera and slit laser is used for the acquisition of 3D information and it is used attached on the robot. Nut runner is used for the manipulation of stop nut and adjust bolt on the tie rod. Detailed procedures for the automatic manipulation of tie rod are presented. In the presented approach, we effectively use 3D information in whole procedure such as computing distance to the tie rod, rotation angle of bolt and nut. Experimental results show the feasibility of the proposed algorithm.

• Journal of Acupuncture Research
• /
• v.31 no.4
• /
• pp.11-19
• /
• 2014

Objectives : Acupuncture manipulation, a kind of sophisticated hand movements, has been considered a fundamental skill for acupuncture practice. In this study, we aimed to develop acupuncture manipulation education system(AMES) using visual feedback of acupuncture manipulation. We also investigated whether or not acupuncture practice-$na{\ddot{i}}ve$ students could enhance their acupuncture manipulation skills after AMES training. Methods : Using AMES and motion sensor, we visualized a time-series motion template(intended motion) and participant's own motion(actual motion) manipulating an acupuncture needle. Ten students were trained with complex lifting/thrusting techniques for 8 training trials. We compared the motion pattern error of the students between the first and the last trials. Results : In our pilot experiment, half of the participants showed significantly improved manipulation skills in complex lifting/thrusting techniques after training with AMES which is developed in this study, while the other half of the participants did not show significant improvements. Conclusions : The AMES could be useful in acupuncture-manipulation training for students. Our findings suggest that novice can improve sophisticated hand movement for acupuncture manipulation with sensorimotor learning using visual feedback.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.32-39
• /
• 2009

Most mobile devices provide limited input interfaces in order to maximize the mobility and the portability. In this paper, the author proposes a small cubic-shaped tangible input interface which tracks the location, the direction, and the velocity using MEMS sensor technology to overcome the physical limitations of the poor input devices in mobile computing environments. As the preliminary phase for implementing the proposed tangible input interface, the prototype design and implementation methods are described in this paper. Various experiments such as menu manipulation, 3-dimensional contents control, and sensor data visualization have been performed in order to verify the validity of the proposed interface. The proposed tangible device enables direct and intuitive manipulation. It is obvious that the mobile computing will be more widespread and various kinds of new contents will emerge in near future. The proposed interface can be successfully employed for the new contents services that cannot be easily implemented because of the limitation of current input devices. It is also obvious that this kind of interface will be a critical component for future mobile communication environments. The proposed tangible interface will be further improved to be applied to various contents manipulation including 2D/3D games.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1071-1075
• /
• 2003

In this paper, we present a DNA manipulation device in the reaction chamber, which consists of a center electrode and circular outer electrodes of a reaction unit. The charged bio-molecules, DNA, are manipulated by the charge of the electrode in reaction unit. Controlling the induced dynamic electric field between the center electrode and the outer electrodes, concentration / repulsion / manipulation of bio-molecules are enabled at a periphery of electrode. Concentration of the fluorescent DNA at the center electrode is observed by applying ＋2V. Subsequently, applying －2V, the concentrated DNA is repelled rapidly from the center electrode, which makes dispersion completely in 0.5second. Furthermore, repeated applying ＋1V/－1V every 5 seconds at each outer electrode, we can circulate the DNA. We also investigate a micro-heater and sensor for DNA manipulation and reaction temperature. The coefficient of heat-resistance and heater temperature characteristic is 0.0043 and 100$^{\circ}C$/sec, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1593-1597
• /
• 2003

The home service robot supports human beings by performing various kinds of works at home. This paper presents a simple control method for opening a door from the viewpoint of the mobile manipulation. The simulation shows various results of path planning and motion planning for opening a door. The joint trajectories were generated by the simulation system. In general, a six-axis force/torque sensor at an end-effector is needed in order to maintain the static equilibrium of the manipulator. But we show another method. From three components of applied forces which was directly obtained by the three-axis force sensor and three components of applied forces which was indirectly estimated by the joint-torque sensors, all of joint torques that will exactly balance forces at the end-effector in the static situation can be found. It is more practical method than using a six-axis force sensor in a wrist. Experimental results have shown that the opening a door can be realized more effectively from the suggested control method of mobile manipulation.