• 한국인공지능학회지
• /
• 제6권1호
• /
• pp.1-10
• /
• 2018

Compressed Air is an important energy source used in most factories nowadays. The automation trend using air compressor has been gradually increasing with the interest of the 4th industry in recent years. With the air compressor system, it is possible to construct the device at low cost and easily achieve automation and energy saving. In addition, With trend of FA, miniaturation and light weight manufacturing trend expand their use in the electronics, medical, and food sectors. Research method is to design the technology for the remote control of the following information as USN base. Development of flexible sensing module from real time observation module for fusion of IT technology in compressed air systems, design and manufacture of flexible sensing module, and realiability assessment. Design of real-time integrated management system for observation data of compressed air system - Ability to process observation data measured in real time into pre-processing and analysis data. This study expects unconventionally decreasing effect of energy cost that takes up 60~70% of air compressor layout and operation and maintenance management cost through USN(Ubiquitous Sensor Network) technology by using optimum operational condition from real time observation module. In addition, by preventing maintenance cost from malfunction of air compressor beforehand, maintenance cost is anticipated to cut back.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.544-547
• /
• 2008

As the mobile electronic product is getting slimmer and smaller, the necessity of keypad is being increased. But the possibility of mis-typing keypad is increased rapidly due to the integrated keypad in the small mobile product. The business division has not considered the methodology of keypad design essentially. In this paper, analysis method and design evaluation standard to reduce the mis-typing of UMPC(Ultra Mobile Personal Computer) is suggested. First, the finite element analysis model and the biomechanical human body model are implemented in order to simulate the exact contact characteristic between finger and keypad. The reliability of analysis model is guaranteed by the comparison of the contact pressure between analysis result and experiment result of the pressure sensor. The design optimization of key shape and layout is derived through the response surface method. The prototype model is produced with the optimized design of keypad, and then it verified the advanced function with user mis-typing detection test. The optimized keypad design reduced the mis-typing ratio from 35% of existing model to 75 of proposed model. If this paper is widely applied to not only UMPC but also the other electronic products, the emotional quality of all products could be improved considerably.

• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.141-163
• /
• 2016

Fiber models have been developed and applied to various structural elements such as shear walls, beams and columns. Only scarcely have fiber models been applied to circular foundation systems such as cast in drilled holes shafts (CIDH). In pile foundations with constraint head boundary conditions, shear deformations can easily contribute to the lateral pile response. However, soil structure interaction formulations such as the p-y method, commonly used for lateral pile design, do not include structural shear deformations in its traditional derivation method. A fiber model that couples shear and axial-bending behavior, originally developed for wall elements was modified and validated on circular cross sections (columns) before being applied to a 0.61 m diameter reinforced concrete (RC) pile with fixed head boundary conditions. The analytical response was compared to measured test results of a fixed head test pile to investigate the possible impact of pile shear deformations on the displacement, shear, and moment profiles of the pile. Results showed that shear displacements and forces are not negligible and suggest that nonlinear shear deformations for RC piles should be considered for fixed-head or similar conditions. Appropriate sensor layout is recommended to capture shear deformation when deriving p-y curves from field measurements.

• 한국정보통신학회논문지
• /
• 제17권5호
• /
• pp.1106-1112
• /
• 2013

키넥트는 이용자의 신체를 이용하여 게임과 엔터테인먼트를 경험할 수 있는 주변기기로 2010년 초 마이크로소프트사에서 발표하여 공개하였다. 본 논문은 키넥트에서 제공하는 세 가지 센서를 이용한 동작 인식 기능을 이용한 기타리듬 게임의 개발과 관련 기술에 대하여 다룬다. 리듬 게임은 게임의 여러 장르 중에서 매우 단순하고 학습기간이 짧으며, 신체의 활발한 활동성과 리듬성을 이용하기 때문에 피씨, 콘솔기기, 스마트폰 등 다양한 기기에서도 널리 활용되고 있는 장르이다. 본 논문에서 구현한 리듬게임은 화면구성과 게임화면을 DirectX 11버전에서 구현하였으며, 키넥트를 이용하여 게이머의 손동작 인식을 수행하기 위하여 OpenNI API를 사용하였으며 신체 움직임을 표현하기 위하여 OpenGL 라이브러리를 사용하였다.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.607-616
• /
• 2019

The video deflectometer based on digital image correlation is a non-contacting optical measurement method which has become a useful tool for characterization of the vertical deflections of large structures. In this study, a novel imaging model has been established which considers the variations of pitch angles in the full image. The new model allows deflection measurement at a wide working distance with high accuracy. A monocular video deflectometer has been accordingly developed with an inclination sensor, which facilitates dynamic determination of the orientations and rotation of the optical axis of the camera. This layout has advantages over the video deflectometers based on theodolites with respect to convenience. Experiments have been presented to show the accuracy of the new imaging model and the performance of the monocular video deflectometer in outdoor applications. Finally, this equipment has been applied to the measurement of the vertical deflection of Yingwuzhou Yangtze River Bridge in real time at a distance of hundreds of meters. The results show good agreement with the embedded GPS outputs.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.294-300
• /
• 2017

The offshore installations and ships are the structures most likely to be exposed to hazards such as hydrocarbon fire and/or explosion. Developing proactive measures to prevent the escalation of such events thus requires detailed knowledge of the related phenomena and their consequences. $CO_2$ extinguishing systems are extensively used for fire accidents of on-and offshore installations because of outstanding performance and low cost. There is, however, the risk of carbon dioxide system which enumerates many of the fatalities by suffocation associated with industrial fire protection requirements. Therefore, the aim of this study is to perform the prediction of fire suppression characteristics of the carbon dioxide system in realistic enclosed compartment area of ships and propose $CO_2$ extinguish fire fighting system for preventing suffocation accidents during fire fighting. According to CFD calculations, it can be observed and assessed that various fire profiles with $CO_2$ and $O_2$ mole fraction in the target enclosed compartment area are applicable within the proposed system. Additionally, the design of fire safety system of ships and offshore installations can utilize ventilation system and/or layout arrangement through the proposed system.

• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.827-838
• /
• 2021

The dynamic displacement is considered to be an important indicator of structural safety, and becomes an indispensable part of Structural Health Monitoring (SHM) system for high-speed railway bridges. This paper proposes an indirect strain based dynamic displacement reconstruction methodology for high-speed railway box girders. For the typical box girders under eccentric train load, the plane section assumption and elementary beam theory is no longer applicable due to the bend-torsion coupling effects. The monitored strain was decoupled into bend and torsion induced strain, pre-trained multi-output support vector regression (M-SVR) model was employed for such decoupling process considering the sensor layout cost and reconstruction accuracy. The decoupled strained based displacement could be reconstructed respectively using box girder plate element analysis and mode superposition principle. For the transformation modal matrix has a significant impact on the reconstructed displacement accuracy, the modal order would be optimized using particle swarm algorithm (PSO), aiming to minimize the ill conditioned degree of transformation modal matrix and the displacement reconstruction error. Numerical simulation and dynamic load testing results show that the reconstructed displacement was in good agreement with the simulated or measured results, which verifies the validity and accuracy of the algorithm proposed in this paper.

• 터널과지하공간
• /
• 제29권4호
• /
• pp.243-261
• /
• 2019

미소진동기술을 활용한 계측 및 안전관리는 전통적인 방법에 비해 우수성이 인정되어 국내외 광산 등에서 활용되고 있다. 그러나 국내 지하광산의 비정형화와 채굴적과 암반 등이 혼재한 복잡한 구조는 미소 진동 전파속도 산정과 미소진동 신호의 초동발췌를 어렵게 한다. 본 연구에서는 여러 초동발췌방법과 차원에 따른 음원위치의 결정에 대해 실험적 연구를 수행하였다. 초동발췌방법은 FTC(First Threshold Cross), Picking window, AIC(Akaike Information Criterion)을 사용하였으며, 2차원 센서 배열일 때 2차원과 3차원 음원발생 실험을 수행하였다. 각 실험에서 음원위치결정 알고리즘은 반복법과 유전자 알고리즘을 사용하였다. 반복법은 센서 배열과 음원발생이 동차원인 경우 효과적이나 음원발생이 상위차원인 경우에는 적합하지 않았다. 반면, RCGA를 이용한 음원위치결정의 경우 상위차원 음원위치를 결정할 수 있었으나 계산속도가 다소 느렸다. 초동발췌방법의 정확도는 음원위치결정 방법에 따라 다르게 나타났으나, Picking window가 전반적으로 높은 정확도를 나타냈다.

• 센서학회지
• /
• 제8권1호
• /
• pp.38-44
• /
• 1999

본 논문에서는 8빔 압저항형 가속도센서에서 하나 이상의 빔이 파손되는 대부분의 경우에 대하여 에러신호를 검출할 수 있는 자기진단회로를 구현하고, 이를 PSPICE를 사용하여 시뮬레이션으로 그 기능을 확인하였다. 또한 현재 상용으로 나오는 KA 324 증폭기의 레이아웃을 사용하여 자기진단회로를 표준 바이폴라(bipolar)공정을 이용하여 IC칩으로 제조하고, 24핀 플라스틱 패키지 한 후 자기진단 특성을 조사하였다. 이때, 측정된 회로의 자기진단 특성을 시뮬레이션 결과와 비교하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.291-299
• /
• 2001

Recently, severe wear on the shutdown rod cladding of Ulchin Nuclear Power Plant #1, #2 were observed by the Eddy Current Test(E.C.T.). In particular, the wear at the sixth card location was up to 75%. The test results indicated that the Flow Induced Vibration(F.I.V.) might be the cause of the fretting wear resulting from the contact between Rod Cluster Control Assemblies(RCCAs) and their spacing cards(guide plates) arranged in the guide tube. From reviewing RCCAs fretting wear repots and analyzing the general characteristics of F.I.V. mechanism in the reactor, geometric layout and flow conditions around the control rod, it is concluded that the turbulence excitation is the most probable vibration mechanism of RCCA. To identify the governing mechanism of RCCA vibration, an experiment was performed for a representative rod position in which the most serious fretting wear experienced among the six rod positions. The experimental rig was designed and set up to satisfy the governing nondimensional numbers which are Reynolds number and mass damping parameter. The vibration amplitude measurement by the non-contact laser displacement sensor showed good agreements in the frequency and the maximum wearing(vibration) location with Ulchin E.C.T. results and Framatome report, respectively. The sudden increase in the vibration amplitude was sensed around the 6th guide plate with mass flow rate variation. Comparing the similitude rod behaviour with the idealized response of a cylinder in flow induced vibration, it was found that he dominant mechanism of vibration was transferred from turbulence excitation to periodic shedding at the mass flow ate 90ι/min. Also the critical velocity of the vibration in RCCAs was determined and the vibration can be prevented by reducing the bypass flow rate below the critical velocity.