• 한국방사선학회논문지
• /
• 제18권1호
• /
• pp.27-36
• /
• 2024

본 연구에서는 갑상샘 신티그래피 영상 획득 시 평행다공형 조준기를 적용해보고 각 영상획득 조건에서 바늘구멍형 조준기와의 차이를 정량적으로 분석해보고자 하였다. 이를 위해 갑상샘 팬텀과 점 선원을 이용하여 육안상 크기와 해상력, 민감도, 신호 대 잡음비(Signal to Noise Ratio, SNR), 대조도 대 잡음비(Contrast to Noise Ratio, CNR)를 평가 하였다. 육안상 크기를 비교하였을 때 평행다공형 조준기 적용 시 약 2.00~2.09배 정도의 확대율을 적용해야 바늘구멍형 조준기를 적용 했을 때와 비슷한 크기의 영상을 획득할 수 있는 것을 확인할 수 있었다. 점 선원을 이용한 FWHM(mm)측정에서는 경향성이 보이지 않았고 민감도는 평행다공형 조준기에서 높은 값이 나타났다. SNR, CNR은 낮은 확대율, Matrix Size 128×128, 평행다공형 조준기를 사용하였을 때 높게 나타났다. 육안상 크기가 비슷한 영상에서는 Matrix Size가 같을 때 바늘구멍형 조준기에서 SNR, CNR이 모두 높게 나타났다. 따라서 갑상샘 신티그래피 검사시행 시 각 병원의 상황에 따라 적절한 조건을 설정하여 평행다공형 조준기를 적용한다면 장비 활용 측면과 업무 효율적인 측면에서 좋은 선택지가 될 수 있을 것으로 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1992년도 제2회 학술발표회 논문개요집
• /
• pp.17-18
• /
• 1992

SIMS는 뛰어난 원소검찰감도의 깊이분해능을 가지고 있어서 깊이에 따른 미량불순물 분석에 필수적인 장비이지만, 시료와 불순물의 변화에 따라 이온화율과 깎이는 속도가 달라서 일어나는 matrix effect 때문에 표준시료없이 정량분석을 할 수 없는 문제점이 있다. 이런 SIMS의 단점을 보완하기 위한 방법으로 개발된 여러 가지 SNMS기술중 SIMS에 아무런 기계장치를 덧붙이지 않고도 정량화개선효과를 가져오는 CsX+ SNMS에 대한 연구를 진행하여, 지금까지 밝혀진 실리콘 산화막등에서의 주성분원소 조성비분석을 통해 SNMS기능을 확인하고 SIMS의 주 분석대상인 불순물농도분석에의 적용가능성을 실험해 보았다. 이를 위해 실리콘에 BF2 이온주입후 붕소분포분석시 강한 matrix effect를 나타내는 불소의 효과를 SNMS와 SIMS로 비교하였으며, 검출한계와 dynamic range도 조사하였다. 실험결과 CsX+ SNMS기술은 matrix effect 때문에 실제 분포와 다른 값으로 검출되는 불순물 시료 분석에 적용할 수 있음을 알았다.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1102-1108
• /
• 2002

In this study, a topological design sensitivity of the ai. bearing surface (ABS) is suggested by using an adjoint variable method. The discrete form of the generalized lubrication equation based on a control volume formulation is used as a compatible condition. A residual function of the slider is considered as an equality constraint function, which represents the slider in equilibrium. The slider thickness parameters at all grid cells are chosen as design variables since they are the topological parameters determining the ABS shape. Then, a complicated adjoint variable equation is formulated to directly handle the highly nonlinear and asymmetric coefficient matrix and vector in the discrete system equation of air-lubricated slider bearings. An alternating direction implicit (ADI) scheme is utilized for the numerical calculation. This is an efficient iterative solver to solve large-scale problem in special band storage. Then, a computer program is developed and applied to a slider model of a sophisticated shape. The simulation results of design sensitivity analysis (DSA) are directly compared with those of FDM at the randomly selected grid cells to show the effectiveness of the proposed approach. The overall distribution of DSA results are reported, clearly showing the region on the ABS where special attention should be given during the manufacturing process.

• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.629-640
• /
• 2008

A new algorithm is proposed to determine optimal accelerometer locations (OAL) when a structure is identified by frequency domain system identification (SI) method. As a result, a guideline is presented for selecting OAL which can reflect modal response of a structure properly. The guideline is to provide a minimum number of necessary accelerometers with the variation in the number of measurable target modes. To determine OAL for SI applications effectively, the modal sensitivity effective independence distribution vector (MS-EIDV) is developed with the likelihood function of measurements. By maximizing the likelihood of the occurrence of the measurements relative to the predictions, Fisher Information Matrix (FIM) is derived as a function of mode shape sensitivity. This paper also proposes a statistical approach in determining the structural parameters with a presumed parameter error which reflects the epistemic paradox between the determination of OAL and the application of a SI scheme. Numerical simulations have been carried out to examine the proposed OAL algorithm. A two-span multi-girder bridge and a two-span truss bridge were used for the simulation studies. To overcome a rank deficiency frequently occurred in inverting a FIM, the singular value decomposition scheme has been applied.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.239-244
• /
• 2004

Solution-cast films of polymethylmethacrylate (PMMA) and polyurethane (PU) containing polymeric styryl dye up to 5 % by weight were prepared to investigate their acid-sensitivity and mechanical and thermal properties. Original red samples due to styryl dye turned out yellow very rapidly as they were exposed to acid vapor of hydrochloric acid or p-toluenesulfonic acid. According to UV/VIS spectroscopic measurements, characteristic peak intensities near 430 nm and 520 nm increased or decreased relatively with exposed amounts of acid, respectively. Both PMMA and PU samples showed uniform color distribution due to a good miscibility between polymer and dye which can be evidenced by measurements of glass transition temperature. No significant difference in acid-sensitivity was found between PU and PMMA except relative absorbance. However, dependence of their mechanical properties on dye content was somewhat different with PU or PMMA. In case of PMMA, modulus and breaking stress increased up to about 50 % with increasing dye content, whereas those of PU samples showed only slight increase. It was ascribed to whether the matrix polymer was in the glassy or rubbery state.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권5호
• /
• pp.226-232
• /
• 2000

This paper presents application results of the augmented matrix eigen-sensitivity theories to TCSC siting problem for damping the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area mode are computed fro changes in susceptance of the transmission lines. The lines having high sensitivity are chosen as the initial candidates for installing TCSC. Then for each of the chosen candidates, Bodeplot of the transfer function with line susceptance as the input and the bus voltage at one side of the line as the output is computed. Using the Bode plots, the lines having any zeros near the inter-area mode are screened out since design of TCSC controller is very difficult in such a case. The $H_{\infty}$ TCSC controller installed at any finally chosen candidate is found to be effective in damping the inter-area oscillation, and the proposed TCSC siting algorithm is proved to be valid. Design of $H_{\infty}$ controller is described in Part IIof this paper.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권2호
• /
• pp.505-509
• /
• 2012

Background: Matrix metalloproteinases (MMP) are proteolytic enzymes that are essentially involved in turnover of the extracellular matrix (ECM). The aim was to investigate the diagnostic value of MMP-7 and MMP-10 as tumor markers in pleural effusion (PE) and evaluate the value of combining MMP-7, MMP-10 and carcinoembryonic antigen (CEA) assays as diagnostic aids for malignant cells. Materials and Methods: A total of 179 patients with PE (87 malignant and 92 benign) were included in this study. The levels of MMP-7 and MMP-10 were measured using ELISA. Results: Values for MMP-7 and MMP-10 were significantly higher in malignant PE than those in benign PE (P<0.01). Among all variables evaluated, logistic regression found that MMP-7 and MMP-10 were significantly correlated with the presence of malignant disease (P<0.01). Analysis of receiver operating characteristics (ROC) curves showed that the area under the curve of MMP-10 (0.806) was significantly larger than that of MMP-7 (0.771) and CEA (0.789) (P<0.01). With parallel interpretation, the combination of MMP-10 and CEA achieved the higher sensitivity of 94.6%. The combination of MMP-7 and CEA in serial interpretation was able to boost the specificity to 95.7%. The combination of MMP-7, MMP-10 and CEA produced better sensitivity, specificity, PPV and NPV than MMP-7 and MMP-10 alone. Conclusion: MMP-7 and MMP-10 in PE may represent helpful adjuncts to conventional diagnostic tools in ruling out malignancy as a probable diagnosis, thus guiding the selection of patients who might benefit from further invasive procedures.

• Parasites, Hosts and Diseases
• /
• 제51권6호
• /
• pp.751-754
• /
• 2013

Neurognathostomiasis is a severe form of human gnathostomiasis which can lead to disease and death. Diagnosis of neurognathostomiasis is made presumptively by using clinical manifestations. Immunoblotting, which recognizes antigenic components of molecular mass 21 kDa and 24 kDa in larval extracts of Gnathostoma spinigerum (Gs 21/24), has high sensitivity and specificity for diagnosis of neurognathostomiasis. However, only very small amounts of the Gs 21/24 antigens can be prepared from parasites harvested from natural or experimental animals. To overcome this problem, we recently produced a recombinant matrix metalloproteinase (rMMP) protein from G. spinigerum. In this study, we evaluated this rMMP alongside the Gs 21/24 antigens for serodiagnosis of human neurognathostomiasis. We studied sera from 40 patients from Srinagarind Hospital, Khon Kaen University, Thailand, with clinical criteria consistent with those of neurognathostomiasis, and sera from 30 healthy control adults from Thailand. All sera were tested for specific IgG antibodies against both G. spinigerum crude larval extract and rMMP protein using immunoblot analysis. The sensitivity and specificity for both antigenic preparations were all 100%. These results show that G. spinigerum rMMP protein can be used as an alternative diagnostic antigen, in place of larval extract, for serodiagnosis of neurognathostomiasis.

• 전자공학회논문지
• /
• 제51권3호
• /
• pp.75-81
• /
• 2014

디지털 영상의 배포에서, 저작권 침해자에 의해 영상이 불법으로 위 변조되어 유통되는 심각한 문제가 대두되어 있다. 이러한 문제를 해결하기 위하여, 본 논문에서는 위 변조된 디지털 영상의 에지 에너지 정보를 이용한 영상 포렌식 판정 알고리즘을 제안한다. 제안된 알고리즘은 SA (Streaking Artifacts)와 SPAM (Subtractive Pixel Adjacency Matrix)을 이용하여, 원 영상의 JPEG 압축률 (QF=90, 70, 50, 30)에 따른 에지정보와 질의영상의 에지정보를 추출하고, 이를 각각 비교하여 위 변조 여부를 판정한다. 원 영상과 질의영상의 에지정보 매칭은 JPEG 압축률 조합의 임계치 (TCJCR : Threshold by Combination of JPEG Compression Ratios)에 따라 이루어진다. 실험을 통하여, TP (True Positive)와 FN (False Negative)은 87.2%와 13.8%이며, 산출된 최소평균 판정 에러는 0.1349이다. 그리고 제안된 알고리즘의 성능평가에서 민감도 (Sensitivity)와 1-특이도(1-Specificity)의 AUROC (Area Under Receiver Operating Characteristic) 커브 면적은 0.9388로 'Excellent(A)' 등급임을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권6호
• /
• pp.635-643
• /
• 2021

The results of empirical researches on the diagnosis of lung cancer are insufficient, so it is limited to objectively judge the clinical possibility and utilization according to the accuracy of diagnosis. Thus, this study retrospectively analyzed the lung cancer diagnostic performance of PET-MRI (Positron Emission Tomography-Magnetic Resonance Imaging) by using the decision matrix. This study selected and experimented total 165 patients who received both hematological CEA (Carcinoembryonic Antigen) test and hybrid PET-MRI (¹⁸F-FDG, 5.18 MBq/kg / Body TIM coil. VIVE-Dixon). After setting up the result of CEA (positive:>4 ㎍/ℓ. negative:<2.5㎍/ℓ) as golden data, the lung cancer was found in the image of PET-MRI, and then the SUV_max (positive:>4, negative:<1.5) was measured, and then evaluated the correlation and significance of results of relative diagnostic performance of PET-MRI compared to CEA through the statistical verification (t-test, P>0.05). Through this, the PET-MRI was analyzed as 96.29% of sensitivity, 95.23% of specificity, 3.70% of false negative rate, 4.76% of false positive rate, and 95.75% of accuracy. The false negative rate was 1.06% lower than the false positive rate. The PET-MRI that significant accuracy of diagnosis through high sensitivity and specificity, and low false negative rate and false positive rate of lung cancer, could acquire the fusion image of specialized soft tissue by combining the radio-pharmaceuticals with various sequences, so its clinical value and usefulness are regarded as latently sufficient.