• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.252-257
• /
• 1988

This paper discribes an improved technique for locating partial discharge sites within operating transformers by ultrasonic method which utilizes the different travel times of the electrical and ultrasonic signals produced by partial discharges to determine the location of the sources. The technique was to develope the measurement system based on the enhancement of the acoustic emission signals using signal square, circuit to improve the detectable sensitivity and reliability. Also an ultrasonic pulse generator was designed and made to transmit periodically pulses equivalent to pratial discharges and to check the good performance of the system, echo effects and self-diagnosis. Through the laboratory work, it was confirmed that the system and the generator can be used satisfactorily for diagnosing power transformers and for studying echo effects and self-diagnosis of the system.

• 한국음향학회지
• /
• 제22권2호
• /
• pp.113-120
• /
• 2003

레일리는 수학적 이론에 능했을 뿐 아니라 실험 음향학자로서 중요한 기여를 했다. 그는 리케의 열에 의한 음발생 장치와 노래하는 불꽃을 순음발생 장치로 개선했다. 무엇보다는 그가 만든 인공 새소리 발생장치는 실험용음원의 개선에서 결정적으로 기여했다. 이 장치는 초음파를 발생시켜 실험실 안에서 소리의 직진, 굴절, 회절, 간섭의 실험을 교란 없이 수행할 수 있게 해주었다. 또한 레일리는 소리의 검출장치로서 민감 불꽃을 개선했다. 그는 또한 정밀한 회전속도 조절장치 (소리바퀴)와 소리의 절대 세기를 측정하는 장치 (레일리 원반)를 만들어 실험 음향학의 정밀성의 증진에 기여했다.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.538-543
• /
• 2020

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.326-333
• /
• 2013

This paper presents the performance enhancement of a double-inlet centrifugal blower by the shape optimization of an inlet duct. Two design variables, a length of anti circulation vane and an angles of inlet guide, are introduced to improve the inlet flow uniformity leading to the blower performance. Three-dimensional Navier-Stokes equations are used to analyze the blower performance and the internal flow of the blower. From the shape optimization of the inlet duct of the double-inlet centrifugal blower, the optimal positions of each design variable are determined. Throughout the analysis of sensitivity, it is found that the angle of the inlet guide is more effective than the length of the anti-circulation vane to increase flow uniformity at the outlet of the duct. Efficiency and pressure for the optimal inlet duct shape are successfully increased up to 3.55% and 3.2% compared to those of reference blower at the design flow condition, respectively. Detailed flow field inside the blower is also analyzed and compared.

• Spatial Information Research
• /
• 제20권6호
• /
• pp.69-76
• /
• 2012

본 연구에서는 산업연관분석을 통해 공간정보산업의 특징을 도출하였다. 이를 위하여 공간정보산업을 재분류하고 이에 맞게 산업연관표를 수정하여 공간정보산업을 분석하였으며 생산유발계수, 영향력계수, 감응력계수를 도출하였다. 그 결과 공간정보산업은 생산유발효과는 작으나 전방연쇄효과가 매우 큰 산업으로 확인되었다. 이를 기반으로 공간정보산업 육성을 위한 정책의 방향성을 '산업생태계 조성, 고도화와 활용도 향상 병행, 장기적 관점 수립'으로 제시하였다.

• 제어로봇시스템학회논문지
• /
• 제10권1호
• /
• pp.96-102
• /
• 2004

For sensitivity enhancement, the general assisted-GPS acquisition method adopts not only the coherent accumulation technique but also the non-coherent accumulation technique since the long coherent accumulation period increases the number of frequency search cells. But the non-coherent accumulation technique causes tile squaring loss, which is a dominant factor among the acquisition losses of assisted GPS dealing with weak GPS signals. This paper derives the squaring loss of the previous assisted-GPS acquisition method and proposes an assisted-GPS acquisition method for solving the problem of squaring loss in weak signal environment. In this paper, it is explained that the proposed assisted-GPS acquisition method prevents the squaring loss using a coupled coherent accumulation technique and the number of search cells of the proposed assisted-GPS acquisition method is much smaller than that of the previous assisted-GPS acquisition method. Finally, through the simulation by the GPS simulator, the acquisition success rate of the proposed assisted-GPS acquisition method is compared with that of the previous assisted-GPS acquisition method and the acquisition improvements are shown in weak signal environment.

• Advances in Computational Design
• /
• 제3권3호
• /
• pp.289-302
• /
• 2018

The use of optimum content of supplementary cementing materials (SCMs) such as limestone filler (LF) to blend with Portland cement has been resulted in many environmental and technical advantages, such as increase in physical properties, enhancement of sustainability in concrete industry and reducing $CO_2$ emission are well known. Artificial neural networks (ANNs) have been already applied in civil engineering to solve a wide variety of problems such as the prediction of concrete compressive strength. The feed forward back propagation (FFBP) algorithm and Tan-sigmoid transfer function were used for the ANNs training in this study. The training, testing and validation of data during the backpropagation training process yielded good correlations exceeding 97%. A parametric study was conducted to study the sensitivity of the developed model to certain essential parameters affecting the compressive strength of concrete. The effects and benefits of limestone filler on hardened properties of the concrete such as compressive strength were well established endorsing previous results in the literature. The results of this study revealed that the proposed ANNs model showed a high performance as a feasible and highly efficient tool for simulating the LF concrete compressive strength prediction.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권5호
• /
• pp.449-454
• /
• 2006

Here we present a sensitive DNA detection protocol using quantum dots (QDs) and magnetic beads (MBs) for large volume samples. In this study, QDs, conjugated with streptavidin, were used to produce fluorescent signals while magnetic beads (MBs) were used to isolate and concentrate the signals. The presence of target DNAs leads to the sandwich hybridization between the functionalized QDs, the target DNAs and the MBs. In fact, the QDs-MBs complex, which is bound using the target DNA, can be isolated and then concentrated. The binding of the QDs to the surface of the MBs was confirmed by confocal microscopy and Cd elemental analysis. It was found that the fluorescent intensity was proportional to concentration of the target DNA, while the presence of non-complementary DNA produced no significant fluorescent signal. In addition, the presence of low copies of target DNAs such as 0.5 pM in large volume samples up to 40mL was successfully detected by using a magnet-assisted concentration protocol which consequently results in the enhancement of the sensitivity more than 100-fold.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.90-90
• /
• 1995

The Influence of age on the endothelial modulation of angiotensin II (AII)-induced contractile response was investigated in isolated aortic rings of rats ranging in age from 0.7 to 20 months. Hemoglobin and L-NAME were used to examine whether age-related changes in the EDRF-releasing system were involved in endothelial modulation of All-induced contraction in rat aorta. In all five age groups (0.7, 1.5, 3, 6, 20 months), hemoglobin (10 ${\mu}$M) significantly enhanced All-induced contractile response only in aorta with endothelium intact. L-NAME (10 ${\mu}$M) Produced a significant enhancement in All responses in endothelium-intact aortas from rats aged 0.7 and 1.5 months, but it had no effect in aortas from older rats aged 6 and 20 months. Indomethacin (10 ${\mu}$M) did not affect All-induced contractile responses in both endothelium intact and removed aortas from rats at the age of 0.7 to 20 months. Hemoglobin (10 ${\mu}$M) abolished acetylcholine-induced relaxation response in aortas from young and old rats. L-NAME completely abolished the relaxation in aortas from young (0.7 and 1.5 months), but incompletely in aortas from older (6 and 20 months) rats. The sensitivity of endothelium-dependent relaxation to A23187 increased with age between ages of 0.7 and 6 months, with no further increase noted up to 20 months of age. These results suggest that endothelial modulation of AII-induced contraction in rat aorta might involve age-related alteration in EDRF-releasing system, probably via post-receptor mechanism.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.487-492
• /
• 2007

The enhancement of the service life of damaged or cracked structures is a major issue for researchers and engineers. The hierarchical void element with the integrals of Legend polynomials is used to characterize the fracture behavior of unpatched crack as well as repaired crack with bonded composite patches by computing the stress intensity factors and stress contours at the crack tip. The numerical approach is based on the v-version degenerate shell element including the theory of anisotropic laminated composites. Since the equivalent single layer approach is adopted in this study, the proposed element is necessary to represent a discontinuous crack part as a continuum body with zero stiffness of materials. Thus the aspect ratio of this element to represent the crack should be extremely slender. The sensitivity of numerical solution with respect to energy release rate, displacement and stress has been tested to show the robustness of hierarchical void element as the aspect ratio is increased up to 2000. The stiffness derivative method and displacement extrapolation method have been applied to calculate the stress intensity factors of Mode I problem.