Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Development of accuracy enhancement system for boron meters using multisensitive detector for reactor safety

  • Sung, Si Hyeong (Nuclear Engineering, Ulsan National Institute of Science and Technology) ;
  • Kim, Hee Reyoung (Nuclear Engineering, Ulsan National Institute of Science and Technology)
  • Received : 2019.03.15
  • Accepted : 2019.08.07
  • Published : 2020.03.25
Download PDF
⟨ Previous Next ⟩

Abstract

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

Keywords

References

  1. J.M. Wong, Boron control in power plant reclaimed water for potable reuse, Environ. Prog. 3 (1984) 5-11. https://doi.org/10.1002/ep.670030104
  2. H. Kim, S.H. Lee, J.S. Park, H. Kim, Y.S. Chang, G. Heo, Reliability data update using condition monitoring and prognostics in probabilistic safety assessment, Nucl. Eng. Technol. 47 (2) (2015) 204-211. https://doi.org/10.1016/j.net.2014.12.008
  3. G.A. Coulman, Chemical sampling as a data filter, Can. J. Chem. Eng. 42 (6) (1964) 262-265. https://doi.org/10.1002/cjce.5450420606
  4. I.H. Rhee, H. Jung, D. Cho, Evaluation of pH control agents influencing on corrosion of carbon steel in secondary water chemistry condition of pressurized water reactor, Nucl. Eng. Technol. 46 (2014) 431-438. https://doi.org/10.5516/NET.09.2013.076
  5. M. Zubair, R. Ahmed, G. Heo, Quantitative and qualitative analysis of safety parameters in nuclear power plants, Int. J. Energy Res. 38 (6) (2014) 755-764. https://doi.org/10.1002/er.3080
  6. L.C. Chen, Z. Yu, H. Furuya, Y. Hashimoto, K. Takekawa, H. Suzuki, O. Ariyada, K. Hiraoka, Development of ambient sampling chemi/chemical ion source with dielectric barrier discharge, J. Mass Spectrom. 45 (8) (2010) 861-869. https://doi.org/10.1002/jms.1772
  7. H. Lee, S. Choi, S.H. Kim, S. Lyou, D. Lee, Performance evaluation of boron meter based on MCNPX model, in: International Symposium on Symbiotic Nuclear Power Systems for the 21th Century (ISSNP2013), 2013 Nov.
  8. C. Kong, H. Lee, D. Lee, S.H. Kim, S. Lyou, Sensitivity evaluation of boron meter model, in: Transactions of the Korean Nuclear Society Autumn Meeting, 2015. Gyeongju, Republic of Korea, October 29-30.
  9. C. Kong, H. Lee, S.H. Kim, S. Lyou, D. Lee, Application of rational function for accuracy improvement of boron meter model, in: Proceedings of the Reactor Physics Asia. 2015 Sep 16, 2015.
  10. C. Kong, H. Lee, S.H. Kim, S. Lyou, D. Lee, Optimization of boron meter model, in: InInternational Congress on Advances in Nuclear Power Plants (ICAPP2016), 2016 Apr 17.
  11. A.K. Khokonov, Y.V. Savoiskii, A.V. Kamarzaev, Neutron sensitivity and detection efficiency of 3 He and 10 BF 3 counters, Phys. At. Nucl. 73 (9) (2010) 1482-1486. https://doi.org/10.1134/S1063778810090024
  12. T. Qian, P. Tonner, N. Keller, W.J. Buyers, Laboratory tests of a modified 3He detector for use with startup instrumentation, in: Conference organizing committee 16, 1997, p. 210.
  13. S.H. Sung, H.R. Kim, Experimental characterization of the accuracy of multidetector boron meter for operational safety of reactors, Int. J. Energy Res. 42 (8) (2018) 2701-2709. https://doi.org/10.1002/er.4059
  14. S. Koperny, T.Z. Kowalski, Performance of proportional counters under high count rate, high gas gain and at high working gas pressure, Nucl. Phys. B Proc. Suppl. 197 (1) (2009) 370-373. https://doi.org/10.1016/j.nuclphysbps.2009.10.106
  15. A.S. Boiler, Pressure Vessel Committee. ASME Boiler and Pressure Vessel Code-Aan Internationally Recognized Code: Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators, American Society of Mechanical Engineers, 1998.
  16. M.B. King, N.M. Queen, Use of rational functions for representing data, J. Chem. Eng. Data 24 (3) (1979) 178-181. https://doi.org/10.1021/je60082a001
  17. T. Qian, N. Keller, Degradation and life expectancy test for various BF3 Detectors, in: Annual Canadian Nuclear Society Conference, Fredericton, NB (Canada), 1996, Jun 9-12, 1996.