• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.316-324
• /
• 2010

In this paper, we design a 256 kbits EEPROM for a MCU (Microcontroller unit) with the wide voltage range of 1.8 V to 5.5 V. The memory space of the EEPROM is separated into a program and data region. An option memory region is added for storing user IDs, serial numbers and so forth. By making HPWs (High-voltage P-wells) of EEPROM cell arrays with the same bias voltages in accordance with the operation modes shared in a double word unit, we can reduce the HPW-to-HPW space by a half and hence the area of the EEPROM cell arrays by 9.1 percent. Also, we propose a page buffer circuit reducing a test time, and a write-verify-read mode securing a reliability of the EEPROM. Furthermore, we propose a DC-DC converter that can be applied to a MCU with the wide voltage range. Finally, we come up with a method of obtaining the oscillation period of a charge pump. The layout size of the designed 256 kbits EEPROM IP with MagnaChip's 0.18 ${\mu}m$ EEPROM process is $1581.55{\mu}m{\times}792.00{\mu}m$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.448-452
• /
• 2007

Many industrial operations require continuous or nearly-continuous operation of machines, which if interrupted can result in significant financial loss. The condition monitoring of these machines has received considerable attention recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is the development of smart sensor using which can on-line perform condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This sensor can receive data in real-time or periodic time from MEMS accelerometer. Furthermore, this system is capable for signal preprocessing task (High Pass Filter, Low Pass Filter and Gain Amplifier) and analog to digital converter (A/D) which is controlled by CPU. A/D converter that converts 10bit digital data is used. This sensor communicates with a remote site PC using TCP/IP protocols. Wireless LAN contain IEEE 802.11i-PSK or WPA (PSK, TKIP) encryption. Developed sensor executes performance tests for data acquisition accuracy estimations.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.872-878
• /
• 2008

Many industrial operations require continuous or nearly-continuous operation of machines, interruption of which can result in significant cost loss. The condition monitoring of these machines has received considerable attentions in recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is to develop a new type of smart sensor for on-line condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This system is capable for signal preprocessing task and analog to digital converter which is controlled by CPU. This sensor communicates with a remote site PC using TCP/IP protocols. The developed sensor executes performance tests for data acquisition accuracy estimations.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.129-134
• /
• 2010

Intelligent Power Switch (IPS) is a semiconductor device which contains a logic circuit in itself. It has received significant attention as a switching component to substitute the fuse and relay components in common automobile since the internal logic provides the controllability on the loads. However, a control system for the IPS status control and a network system to share the status information of IPS are required to fully exploit the capabilities of IPS. In this paper, we propose a control circuit and algorithm using IPS. Also the communication system between the control systems and IPS components using Control Area network (CAN) are proposed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.229-236
• /
• 2005

This paper presents a system level architecture evaluation technique that leverages transaction level modeling but also significantly extends it to the realm of system level performance evaluation. A major issue lies with the modeling effort. To reduce the modeling effort the proposed technique develops the concept of worst case scenarios. Since the memory controller is often found to be an important component that critically affects the system performance and thus needs optimization, the paper further addresses how to evaluate and optimize the memory controllers, focusing on the test environment and the methodology. The paper also presents an industrial case study using a real state-of-the-art design. In the case study, it is reported that the proposed technique has helped successfully find the performance bottleneck and provide appropriate feedback on time.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.2
• /
• pp.320-342
• /
• 2011

This paper tries to analyze the evolution of technological innovative pattern in system semiconductor industry from the perspective of the evolution of way by which knowledge is generated and its related evolution of inter-firm relationships. In particular, this paper focuses on the evolution of knowledge after the emergence of EDA as a design tool, as a main momentum. As a result of analysis, we can find out following things. First, the innovative activities have evolved from design activity-centered technology development to innovative activities focusing on searching activities for utilizing knowledge and technology. Second, with rising value of knowledge, creation of new market utilizing knowledge, and development of new industry and new technology through inter-firm relationship had been made, in addition to strengthened specialized technological division of labor. Third, with focusing on utilization of knowledge, inter-firm network has taken diverse forms for building complementary platform for co-development. This discussion can give an insight on the necessity of utilizing inter-firm network strategically and setting strategies for enhanced searching activities such as market creation and knowledge utilization.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.913-918
• /
• 2014

Five mol % tungsten-doped tin oxide ($W_{0.05}Sn_{0.95}O_2$, TTO5) was prepared by co-precipitation of $SnCl_4{\cdot}5H_2O$ and $WCl_4$, followed by calcination at $1000^{\circ}C$. The as-prepared TTO5 was in the pure cassiterite phase with a particle size of ~50 nm and optical bandgap of 2.51 eV. Herein it was applied for the formation of TTO5/$TiO_2$ heterojunctions by covering the TTO5 surface with $TiO_2$ by sol-gel method. Under visible-light irradiation (${\lambda}{\geq}420$ nm), TTO5/$TiO_2$ showed a significantly high photocatalytic activity in removing gaseous 2-propanol (IP) and evolving $CO_2$. It is deduced that its high visible-light activity is caused by inter-semiconductor holetransfer between the valence band (VB) of TTO5 and $TiO_2$, since the TTO5 nanoparticle (NP) exhibits the absorption edge at ~450 nm and its VB level is located more positive side than that of $TiO_2$. The evidence for the hole-transport mechanism between TTO5 and $TiO_2$ was also investigated by monitoring the holescavenging reaction with 1,4-terephthalic acid (TA).

• KSCI Review
• /
• v.14 no.1
• /
• pp.265-271
• /
• 2006

In this paper, we propose a new automatic fingerprint identification system that identifies individuals in large databases. The algorithm consists of three steps: preprocessing, classification, and matching, in the classification, we present a new classification technique based on the statistical approach for directional image distribution. In matching, we also describe improved minutiae candidate pair extraction algorithm that is faster and more accurate than existing algorithm. In matching stage, we extract fingerprint minutiaes from its thinned image for accuracy, and introduce matching process using minutiae linking information. Introduction of linking information into the minutiae matching process is a simple but accurate way, which solves the problem of reference minutiae pair selection in comparison stage of two fingerprints quickly. This algorithm is invariant to translation and rotation of fingerprint. The proposed system was tested on 1000 fingerprint images from the semiconductor chip style scanner. Experimental results reveal false acceptance rate is decreased and genuine acceptance rate is increased than existing method.

• Journal of Arbitration Studies
• /
• v.21 no.2
• /
• pp.85-112
• /
• 2011

These days utilization of copyright in daily life and economic activities is becoming more important than ever, and IT technology is developing day by day. Along with those fact, copyright infringement and dispute is naturally increasing. This thesis dealt with the 3 different issues of ADR on copyright. The First part, introduce ADR system that was performed by Korea Copyright Committee according to Copyright law. This paper evaluate the committee's efforts to provide resolution of copyright disputes via conciliation was effective. So it needs to be look over several countries' ADR, beside conventional judicial remedy. And Korea's copyright conciliation system which is successfully operating also introduced. Second, In many countries, including South Korea are take advantage of conciliation as the way to settle down the dispute over copyright. Furthermore, looked over if we can use arbitration as tool to settle dispute or not. Currently in Korea, patent dispute is handled by Industrial Property Dispute Conciliation Committee(The Invention Promotion Act Ch.5) and Layout-design Review and Mediation Committee(The Act on the Layout-designs of Semiconductor Integrated Circuits Art.29-34), but using performance of those two committee is still too low. In comparison, the copyright committee, a affiliation organization of the ministry of culture, sports and tourism has much more result in conciliation compare with patent dispute. Copyright disputes has arbitrability of it's subject-matter and many regulating organs are interested in it. (especially, binding of arbitral award and final resolution). Take advantage of both conciliation and arbitration could be good way to resolve copyright disputes. Third, the writer look at the proposal on the creation of Northeast Regional Center for Intellectual Property ADR. Because of the nature of copyright and rapid development of internet technology, international use of work become more frequent and accordingly infringement cases are increasing. The role of commercial arbitration regimes and institutions which has progressed significantly worldwide level, but which has only just begun in the intellectual property ADR area, leads also to a clash of often very different legal cultures and protection in a market economy. International cooperation in regional area with conflict interests becomes an important alternative. But it will depend on the building of regional institutions and mechanisms. The feasibility of this proposal and preconditions were examined. Establishment of new international organization requires a lot of time, cost and efforts. And risk of failure is much too high. Therefore factual, statistical review should be preceded. In addition, technical measures, such as on-line arbitration is necessary to review also. Furthermore in order to establish new organization, the relative law, legal environment, public sentiment and international compliance must be carefully considered with factual review about the needs and economic benefits of each country Yet on complex regulatory matters such as IP and ADR, a great deal of the potential benefits from international standards arises not from the international legal framework nor even the formal content of national legislation, but from the informed and effective use made of the possibilities within the system, including by policymakers and regulators.