• 한국항해학회지
• /
• 제16권1호
• /
• pp.1-12
• /
• 1992

In this study, the self test-system for the marine Gyrocompass was developed and the obtained results are summarized as follows : 1) Utilizing the newly developed self-test system, the time length for observing the transient state of Gyrocompass reading which has been over 4 hours can be reduced to less than 20 minutes. In addition, the dynamic characteristics of the Gyrocompass can be measured within 2 hours after starting the system. 2) Prior test and diagnosis was done by checking all parameters recurrently with period of 2.5minutes. 3) Testing and diagnosis results was shown in graphic mode and could be transmitted to INMARSAT unit using personal computer. 4) The results of the newly designed trouble algorithm for the system was found to be applicable under arbitrary given conditions.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.47-54
• /
• 2008

중소형 가변속 전동기구는 성능뿐만 아니라 가격경쟁력이 중요한 요인 중에 하나로 인식되고 있다. 가변속 전동기중에서 SRM을 중소형 전동기로서 적용할 때 가격경쟁력 측면에서 보면 단상이나 2상이 적합하다. 그러한 이유로 전력용량이 비교적 작은 가정용 전동기구에는 거의 단상 혹은 2상 SRM이 연구되고 있다. 그러나 단상 SRM은 근본적으로 발생토오크가 블연속적이여서 운전특성이 떨어지고 자기동능력이 없어 기동을 위한 보조적인 장치가 항상 필요하다. 또한 2상 SRM은 연속적인 토오크를 만들 수 있으나 기동에 관해서는 아 도 많은 문제점을 안고 있다. 제안한 2상 6/3 SRM은 일반적인 다른 SRM과 달리 고정자 철심에 자속의 교번 없이 구동이 가능하여 철손을 줄일 수 있다. 또한 일반적으로 단상과 2상의 SRM에서 실용화에 있어서 가장 장애가 된 자기동이 안 되는 문제점을 회전자의 비대칭 형상을 이용하여 구동특성의 저하없이 자기동 능력을 가지게 되었다. 특성 해석을 위해 FEM 해석프로그램인 FLUX2D을 사용하였다.

• 동아시아식생활학회지
• /
• 제16권6호
• /
• pp.646-654
• /
• 2006

This study was designed to examine body shape control and its related factors, including BMI(body mass index), desire for weight control, satisfaction with body shape, dissatisfaction with specific parts of body shape, starting period of concern about body shape, as well as experience, method, result, counsel, effort, expense and knowledge of body shape control. The survey was completed by 180 female university students in Gyeongsanbukdo through a self-administered questionnaire during September and October of 2006. The subjects were assigned to one of three groups based on self-estimated figure: 47.8% of the students estimated their figure as 'normal', while 38.3% of the students estimated themselves as 'thin' and 13.9% of the students as 'fat'. The results were as fellows. The mean age of the subjects was $19.45{\pm}1.67$ with a height and weight of $161.15{\pm}4.99cm$ and $52.63{\pm}10.78\;kg$, respectively. Their self-estimated figure was significantly related to BMI, desire for weight control, satisfaction, dissatisfaction with a specific part, and experience, counsel and effort in body shape control. This research suggests that students need to know how to properly control body shape in health and beauty.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.385-392
• /
• 2003

Sol-gel preparation technique using a chemical reaction of metal alkoxides has been widely used for the fabrication of various materials including ceramics. However, its mechanism has been studied till now because a number of chemical ways are possible from various alkoxides and additives. In this study, the mechanism of hydrolysis, condensation, and polymerization of alkoxides were investigated from the fabrication of lead-zirconate-titanate (PbZr$\_$x/Ti$\_$l-x/O$_3$; PZT) thin film that is used as various micro-actuator, transducer, and sensor because of its high electro-mechanical coupling factors and thermal stability. Furthermore, the fabrication process and characteristics of self-patternable PZT film using photosensitive stabilizer were studied in order to resolve the problem of physical damage and properties degradation during dry etching for device fabrication. Using an optimum condition to prepare the self-patternable PZT film, more than 5000 ${\AA}$ thick self-patternable PZT film could be fabricated by three times coating. The PZT film showed 28.4 ${\mu}$c/cm$^2$ of remnant polarization (Pr) and 37.0 kV/cm of coercive field (E$\_$c/).

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.285-289
• /
• 2008

Porous self-bonded silicon carbide (SiC) ceramics were fabricated at temperatures ranging from 1750 to $1850^{\circ}C$ using SiC, silicon (Si), and carbon (C) powders as starting materials. The effect of the Si:C ratio on porosity and strength was investigated as a function of sintering temperature. It was possible to produce self-bonded SiC ceramics with porosities ranging from 36% to 43%. The porous ceramics showed a maximal porosity when the Si:C ratio was 2:1 regardless of the sintering temperature. In contrast, the maximum strength was obtained when the ratio was 5:1.

• Journal of Korean Biological Nursing Science
• /
• 제24권1호
• /
• pp.58-66
• /
• 2022

Purpose: The purpose of this study was to identify the level of psychological insulin resistance and self-care activities and to evaluate the factors affecting self-care activities in patients with type 2 diabetes mellitus undergoing insulin therapy to provide basic data for the development of educational programs. Methods: Data were collected through the interviews using a structured questionnaire from August 29 to October 20, 2017, from the patients with type 2 diabetes mellitus visiting the Diabetes Mellitus Center at H-General Hospital in J-city. The subjects were 168 patients who had been being treated via self-injection for at least three months after the start of insulin therapy. Data analyses were conducted using t-test, ANOVA, Pearson's correlation coefficients, and stepwise multiple regression using the SAS WIN 9.2 program. Results: The mean score of psychological insulin resistance was 61.25 (range 19-95) and the mean score of self-care activities was 53.19 (range 18-90). Self-care activities were significantly different by gender (t = -2.94, p= .004), perceived health status (F= 7.00, p< .001), and hypoglycemia during the last three months (t= -2.47, p= .015). Negative correlation was observed between psychological insulin resistance and self-care activities (r= -.33, p< .001). Self-care activities were significantly predicted by psychological insulin resistance, perceived health status, gender, and hypoglycemia during the last three months, and 19.0% of the variance in self-care activities was explained (F= 9.01, p< .001). Conclusion: Psychological insulin resistance in patients undergoing insulin therapy and its effects on self-care activities identified in this study will be useful in starting and maintaining insulin therapy in the future.

• 한국과학교육학회지
• /
• 제27권9호
• /
• pp.765-777
• /
• 2007

과학 선행학습의 실태 조사와 과학 선행학습이 학생 들의 과학 학습 태도에 미치는 효과에 대해 연구 분석 하였다. 선행학습의 실태 조사에서는 학생들의 선행학습 경험 유 무,선행학습의 형태 (자기 및 타의 주도적 선행학습),선행학습 시작 동기로서 본인 의사 여부, 선행학습에서 문제해결 방법 및 선행학습에서 중요한 요인 등을 조사하였다. 선행학습이 과학 학습 태도에 미치는 영향을 흥미도, 자신감,학습의욕 및 가치 등 4가지 측면에서 연구하였다. 이들 4가지 측면에서 나타나는 효과를 학업 성취 수준,선행학습 형태,선행학습 시작 동기 및 선행학습에서 이해 정도 등의 관점에서 조사 분석하였다. 분석 결과를 살펴보면,자신감,학습의욕 및 가치 측면에서는, '자기주도적 선행학습'에서 보다 높은 긍정적 값이 나왔으며,이것은 '자기주도적 선행학습'을 수행함으로서 스스로 할 수 있다는 가능성,성취감에 따른 내재적 동기 유발,학습에 필요한 내용들을 스스로 찾아가는 자발적 학습 등 긍정적 인식의 결과로 볼 수 있다. 반면,흥미도 측면에서는 수업을 이끌어주는 교사와 또래 친구들 사이에서 형성되는 교감 등으로 인해 '타의주도적 선행학습'이 더 긍정적으로 나타났다. 이상의 연구 결과를 바탕으로,학습자들에게 자신감. 학습의욕 및 가치 등이 필요할 시에는 자기주도적으로 선행학습을 권장하는 것이 바람 직하며,흥미도를 고취시키기 위해서는 타의주도적으로 선행 학습하는 것이 바람직하다.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.324-330
• /
• 2016

본 연구는 간호교육(기본간호학이론 및 실습) 1년을 마친 간호대학생을 대상으로 임상실습 전 시뮬레이션 교육이 자아탄력성, 자기효능감, 전공만족도에 미치는 효과를 알아보는 데 목적이 있다. 연구대상은 J도 J시에 소재한 대학의 간호학과 1학년 학생 28명이며, 단일군 사전사후 설계의 원시실험연구이다. 시뮬레이션 교육의 효과를 분석하기 위해 실험군의 일반적인 특성과 자아탄력성, 자기효능감, 전공만족도를 측정하였다. 연구결과, 자아탄력성(t=-7.38, p<.001)과 자기효능감(t=-4.93, p<.001), 전공만족도(t=-5.28, p<.001)가 모두 통계적으로 유의미하게 향상되었다. 그러므로, 시뮬레이션교육이 간호 대학생의 자아탄력성, 자기효능감, 전공만족도에 미치는 긍정적인 효과를 확인하였다. 이에 본연구자는 시뮬레이션교육의 시작시기로 간호대학생의 시뮬레이션 교육은 임상실습 전에 실시함이 효과적이었음을 제시하는데 의의가 있다.

• 한국직업건강간호학회지
• /
• 제25권4호
• /
• pp.300-310
• /
• 2016

Purpose: Few studies have considered the psychosocial work environment factors in relation to employee health. This study explored the relationship between psychosocial work characteristics and self-rated health among Korean employees. Methods: The study population of 21,476 employees was derived from the 2014 Korean Work Environment Survey (KWES). Psychosocial work environment was measured by Copenhagen psychosocial questionnaire scales. Results: Among employees at workplaces (n=21,476), 23.3% rated their health as poor. Among 12 indicators of psychosocial work environment characteristics, 'higher emotional demand', 'demands for hiding emotions', 'work-family conflict', and 'social community at work' were independently associated with risk of poor self-rated health of Korean employees after adjustment of all sociodemographics, work condition characteristics and physical work environment exposure. In addition, higher 'possibilities for development' and 'social support from supervisor' were more likely to decrease the risk of poor health. Conclusion: We suggest that psychosocial work environment is an important determinant of employees' health. The study results provide a good starting point for developing intervention and strategies for health improvement.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.31-34
• /
• 1996

A new analysis method is presented for the steady state response of electronic ballast circuit. Comparisons and examination among self exited LCC, LLCC resonant converter of electronic ballast for fluorescent lamp in expect of soft starting, component stress shot of are presented. In this paper, the theoretical discussions and analysis are verified by experimental measurements