• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.1-14
• /
• 2002

There is a continuous development of the most common welding processes like MMA, MIG/MAG, PAW and SAW. At the same time there is a conversion from stick electrodes to solid and cored wires with an increased productivity as a result. In parallel with these changes new processes are introduced and implemented. The number of Friction Stir Welding installations is starting to grow fast Hybrid laser welding has probably made a technical break through. The Magnetic Pulse Welding process is taking off. The different mechanical joining methods; clinching and self-piercing riveting; must not be forgotten. Structural adhesive is another method to consider.

• International Journal of Fluid Machinery and Systems
• /
• v.5 no.1
• /
• pp.30-37
• /
• 2012

A two dimensional Darrieus-type turbine has been proposed for the hydropower utilization of extra-low head less than 2m. In a practical use of Darrieus-type hydro-turbine, head and flow rate may be varied temporally and seasonally. Considering that the cost advantage is required for the low head hydro turbine system, the Darrieus turbine should be operated with high efficiency in the wider range of flow rate possibly by using an additional device with simpler mechanism. In the present paper, an adjustment of inlet nozzle section by lowering the inlet nozzle height is proposed to obtain the preferable inlet velocity in low flow rate conditions. Effects of resulting spanwise partial inlet flow are investigated. Finally, an effective modification of inlet nozzle height over flow rate variation is shown.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.607-610
• /
• 2004

An electric power efficiency of electrodeless fluorescent lamp has big relativie propertye of gas in lamp, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. We used magnetic substance that open self-examination material of electrodeless fluorescent lamp antenna. Ferrite that is used in this experiment was Mn-Zn type. Coill turn was changed from 13th to 13th turn to recognize brightness change of lamp by winding number. Optical equipment that used in an experiment was used to measure brightness (LS-100). When an electrodeless fluorescent ]amp was made using and T company's PE22, was it showed the highest brightness. As number of winding is increased the brightness increased, and starting characteristic became good.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1380-1384
• /
• 2015

The DC motor has the strong characteristics in the speed response, the system parameter variations and the external influence and is used as the speed controller with its good starting torque in the distributing industry. However development of the Microprocessor which is for high speed switching program can make better control system. This paper introduce to design of the high-effective DC motor controller that is using Software Bang-Bang Program of Fuzzy algorithm and to verify a PI controller and a Fuzzy controller.

• ETRI Journal
• /
• v.22 no.3
• /
• pp.1-9
• /
• 2000

Self-Clocked Fair Queueing (SCFQ) algorithm has been considered as an attractive packet scheduling algorithm because of its implementation simplicity, but it has unbounded delay property in some input traffic conditions. In this paper, we propose a Rate Proportional SCFQ (RP-SCFQ) algorithm which is a rate proportional version of SCFQ. If any fair queueing algorithm can be categorized into the rate proportional class and input is constrained by a leaky bucket, its delay is bounded and the same as that of Weighted Fair Queueing (WFQ) which is known as an optimal fair queueing algorithm. RP-SCFQ calculates the timestamps of packets arriving during the transmission of a packet using the current value of system potential updated at every packet departing instant and uses a starting potential when it updates the system potential. By doing so, RP-SCFQ can have the rate proportional property. RP-SCFQ is appropriate for high-speed packet-switched networks since its implementation complexity is low while it guarantees the bounded delay even in the worst-case input traffic conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.233-238
• /
• 2011

In piping design of nuclear power plant facilities, the load stress according to self-weight is important for design values in test run(shutdown and starting). But sometimes it needs more studies, such as seismic analysis of an earthquake of power plant area and fatigue life and stress of thermal expansion and anchor displacement in operating run. In this paper, seismic evaluations were performed to nuclear piping system of Shin-Kori NO. 3&4 being built in Pusan lately. Results of seismic analysis are evaluated on basis of KEPIC MN code. The structural integrity on RCB piping system was proved.

• Journal of Internet Computing and Services
• /
• v.3 no.6
• /
• pp.35-41
• /
• 2002

The Car Navigation System(CNS) requires lots of memory and calculating time because it works on the large and complex digital map. And the traffic circumstances vary time by time, so the traffic informations should be processed if we want to get mere realistic result. This paper proposes an effective path searching algorithm which uses less memories and calculating time by applying directional information between the starting place and destination place and by using realtime traffic informations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.88-94
• /
• 2003

The DC motor has the strong characteristics in the speed response, the system parameter variations and the external influence and is used as the speed controller with its good starting torque in the distributing industry. However development of the Microprocessor which is for high speed switching program can make better control system. This paper introduce to design of the high-effective DC motor controller that is using Software Bang-Bang Program of Fuzzy algorithm and to verity a PI controller and a Fuzzy controller.

• Kyungpook Mathematical Journal
• /
• v.49 no.4
• /
• pp.701-712
• /
• 2009

In this paper, we first introduce a family S = {$S_n$ : C ${\rightarrow}$ C} of non-Lipschitzian mappings, called total asymptotically nonexpansive (briefly, TAN) on a nonempty closed convex subset C of a real Banach space X, and next give necessary and sufficient conditions for strong convergence of the sequence {$x_n$} defined recursively by the algorithm $x_{n+1}$ = $S_nx_n$, $n{\geq}1$, starting from an initial guess $x_1{\in}C$, to a common fixed point for such a continuous TAN family S in Banach spaces. Finally, some applications to a finite family of TAN self mappings are also added.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.330-337
• /
• 1993

Figure '8' type, passively-mode-locked erbium-doped-fiber ring laser was developed, incorporating a nonlinear loop mirror. Transmittance of the loop mirror was found to be dependent on the incident light intensity due to the non-reciprocal nonlinear phase shift, which enables the passive mode locking of the laser. Self-starting of stable mode locking was possible with only controlling the polarization controllers inside the cavity without any help of external perturbation or modulation. The mode-locked output pulse shape was discussed in relation with the transmission characteristics of nonlinear loop mirror.