• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.239-244
• /
• 2011

Nano Imprint Lithography(NIL) is technique for copying a pattern from stamp with nano size pattern in order to replicated the materials. It is very important to demold in order to make NIL process effectively. Self Assembled Monolayers(SAM) coater is manufactured by means of decreasing surface energy with the stamp surface treatment to improve release characteristics. Manufactured device contains tilting and rotation option for increasing process life time by coating on the sidewall of the pattern in stamp. The stamp coated with optimized tilting angle $30^{\circ}$ and rotation speed of 10rpm has more imprinting cycles than the stamping coated without tilting and rotation. Effective SAM coating on the sidewall of the pattern in stamp will improve by 50% of process life time.

• 센서학회지
• /
• 제13권2호
• /
• pp.90-95
• /
• 2004

Protein and gene detection have been growing importance in medical diagnostics. Field effect transistor (FET) - type biosensors have many advantages such as miniaturization, standardization, and mass-production. In this work, we have fabricated metal-oxide-semiconductor (MOS) FET that operates as molecular recognitions based electronic sensor. Measurements were taken with the devices under phosphate buffered saline solution. The drain current ($I_{D}$) was decreased after forming self-assembled mono-layers (SAMs) used to capture the protein, which resulted from the negative charges of SAMs, and increased after forming protein by 11.5% at $V_{G}$ = 0 V due to the positive charges of protein.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.270-270
• /
• 2016

We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.159-159
• /
• 2009

We characterize a flexible self-assembled liquid crystal display (LCD) fabricated from a polyimide (PI) alignment layer with polydimethylsiloxane pixel walls. Ion beam (IB) irradiation aligned LC molecules in the PI layer and bonded two flexible plastic substrates in a one-step assembly of the pixel walls. X-ray photoelectron spectroscopic analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy provided chemical and physical evidence for the formation of stable chemical bonds between the PI layer and the PDMS pixel walls in addition to the important maintenance of a uniform 6 um gap between the two substrates without the use of any epoxy resins or other polymers.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1192-1196
• /
• 2001

A diaphorase enzyme electrode for the catalytic reduction of NAD+ , the oxidized form of nicotinamide adenine dinucleotide, has been prepared. The enzyme layer grew spontaneously over an aminoethanethiol self assembled monolayer on a go ld plate electrode. The growth was accomplished by simply dipping the electrode covered by the aminoethanethiol monolayer into a solution containing both glutaraldehyde and diaphorase. We suggested that the glutaraldehyde as a cross-linking reagent was attached to the amino groups of the aminoethanethiol monolayer and the diaphorase enzyme molecules were bound to free aldehyde groups of the glutaraldehyde. Further attachments of the enzyme molecules over the bound enzyme molecules continued with the bridging of the glutaraldehyde. In frequency measurements with a quartz crystal microbalance, the frequency decrease was much more than it was for that of the enzyme monolayer formation, and an enzyme layer thicker than a monolayer was formed. The modified electrode was employed to reduce NAD+ , using diffusional methyl viologen as an electron transfer mediator. The NAD+ was electrocatalytically reduced, and the catalytic current was almost equivalent to that with the multilayered electrode of ten enzyme layers.

• 마이크로전자및패키징학회지
• /
• 제12권4호통권37호
• /
• pp.275-280
• /
• 2005

나노 임프린트 (NIL)와 포토 리소그라피를 접목시킨 combined nanoimprint and photolithography (CNP) 기술을 이용하여 나노 미세 패턴을 형성하였다. 일반적인 UV-NIL 스탬프의 양각 패턴 위에 Cr 금속막을 입힌 hybrid mask mold (HMM)을 E-beam writing과 plasma etching으로 제작하였다. HMM 전면에는 친수성 물질인 $SiO_2$를 코팅하여 점착방지막 역할의 self-assembled monolayer(SAM) 형성을 용이하게 함으로써 HMM과 transfer layer의 분리를 용이하게 하여 패턴 손상을 억제하였다. 또한, transfer layer에는 일반적인 monomer resin 대신에 건식 에칭에 대한 저항력이 높은 negative PR을 사용하였다. Photo-mask 역할을 하는 HMM의 Cr 금속막이 UV를 차단하여 잔류하게 되는 PR의 비경화층(unexpected residual layer)은 간단한 현상 공정으로 제거하여 PR 잔류층이 없는 나노 미세 패턴을 transfer layer에 형성하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권8호
• /
• pp.1169-1173
• /
• 2006

Imaging ellipsometry (IE) for detection of binding of Escherichia coli O157:H7 (E. coli O157:H7) to an immunosensor is reported. A protein G layer, chemically bound to a self-assembled layer of 11-mercaptoundecanoic acid (11-MUA), was adopted for immobilization of monoclonal antibody against E. coli O157:H7 (Mab). The immobilization of antibody was investigated using surface plasmon resonance. To fabricate antibody spots on a gold surface, protein G solution was spotted onto the gold surface modified with an 11-MUA layer, followed by immobilizing Mab on the protein G spot. Ellipsometric images of the protein G spot, the Mab spot, and Mab spots with binding of E. coli O157:H7 in various concentrations were acquired using the IE system. The change of mean optical intensity of the Mab spots in the ellipsometric images indicated that the lowest detection limit was $10^3$CFU/ml for E. coli O157:H7. Thus, IE can be applied to an immunosensor for detection of E. coli O157:H7 as a detection method with the advantages of allowing label-free detection, high sensitivity, and operational simplicity.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.1983-1987
• /
• 2008

This study demonstrates the electrochemical conversion of the synthetic procedure of monolayer-protected clusters using a thin toluene layer over an edge plane pyrolytic graphite electrode. A thin toluene layer with a thickness of 0.31 mm was coated over the electrode and an immiscible liquid/liquid water/toluene interface was introduced. The transfer of the tetrachloroaurate ($AuCl_4^-$) ions into the toluene layer interposed between the aqueous solution and the electrode surface was electrochemically monitored. The $AuCl_4^-$ ions initially could not move through into the toluene layer, showing no reduction wave, but, in the presence of the phase transfer reagent, tetraoctylammonium bromide (TOABr), a cathodic wave at 0.23 V vs. Ag/AgCl was observed, indicating the reduction of the transferred $AuCl_4^-$ ions in the toluene layer. In the presence of dodecanethiol together with TOABr, a self-assembled monolayer was formed over the electro-deposited metallic gold surface. The E-SEM image of the surface indicates the formation of a highly porous metallic gold surface, rather than individual nanoparticles, over the EPG electrode.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.23.1-23.1
• /
• 2010

Alkanethiol (CH3(CH2)nSH) 자기 조립 박막은 금, 은, 팔라듐 그리고 구리와 같은 금속 물질과 결합하여 산화 방지 보호막, 생화학적 멤브레인 그리고 케미컬 센서로 널리 이용되었다. 전도성을 가진 많은 금속 분말 중에서, 구리는 뛰어난 열, 전기 전도성과 풍부한 양으로 다른 귀금속에 비교하여 경제성까지 갖춘 물질이다. 그러나 이러한 구리 나노 분말은 대기에 노출된 구리 분말이 쉽게 산화된다는 결정적인 단점 때문에 그동안 널리 이용되지 못하였다. 이러한 구리의 단점을 극복하고 뛰어난 전도성의 특징을 이용하고자, Langmuir-Blodgett (LB), layer by layer (LbL), electrophoretic deposition (EPD), self-assembled monolayer (SAM)과 같은 구리 나노 분말 위에 유기 박막을 형성하고자 하는 많은 방법이 시도되어왔다. 이러한 방법들 대부분은 습식 방법으로 진행되었으며, 약 2-nm 두께의 SAM 구조를 형성할 수 있음이 많은 연구를 통하여 확인되었다. 그러나 습식 기반의 SAM 구조는 단지 수일 동안만 유효하며, 이는 코팅을 수행하면서 점차 떨어지는 source solvent의 순도와 적합하지 않은 코팅 조건, 그리고 이러한 원인으로 형성된 부실한 막질 구조 때문으로 추측된다. 게다가 이러한 습식 기반 공정은 코팅 막의 두께 조절과 코팅 시 solvent의 순도를 일정하게 유지하는 것이 매우 복잡하고 어려운 작업으로 알려져 왔다. 본 실험에서는 고 진공 챔버 (< $4.0{\times}10-6$ torr) 시스템을 이용하여 습식 기반 공정의 문제점을 극복하고 구리 나노 분말의 산화를 막기 위한 실험을 진행하였다. 1-octanethiol (CH3(CH2)7SH)은 중간 길이의 hydrocarbon (n=7) 구조를 가진 특징 때문에 코팅 물질로 사용되었다. 게다가, alkanethiol 족 특유의 물질인 황(sulfur)은 구리와 결합하여 산화방지 보호막의 역할을 수행할 수 있다. 저 진공 조건에서는 10-nm의 multilayer가 일괄적으로 코팅됨을 확인할 수 있었다. 본 실험에서는 약 10-nm 두께의 자기 조립 박막(self assembled monolayers: SAMs)이 고 진공 조건에서 구리 나노 분말 표면 위에 코팅 조건의 변경을 통해서 5-nm에서 10-nm 두께의 1-octanethiol SAMs 구조를 얻어낼 수 있었다. 이는 고 진공 조건에서 1-octanethiol SAMs의 코팅 두께를 조절함으로 다양한 크기의 분말에 코팅 물질로 쓰일 수 있음을 알 수 있다.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.542-546
• /
• 2019

We investigate the characteristics of self-assembled quantum dot infrared photodetectors(QDIPs) based on doping level. Two kinds of QDIP samples are prepared using molecular beam epitaxy : $n^+-i(QD)-n^+$ QDIP with undoped quantum dot(QD) active region and $n^+-n^-(QD)-n^+$ QDIP containing Si direct doped QDs. InAs QDIPs were grown on semi-insulating GaAs (100) wafers by molecular-beam epitaxy. Both top and bottom contact GaAs layer are Si doped at $2{\times}10^{18}/cm^3$. The QD layers are grown by two-monolayer of InAs deposition and capped by InGaAs layer. For the $n^+-n^-(QD)-n^+$ structure, Si dopant is directly doped in InAs QD at $2{\times}10^{17}/cm^3$. Undoped and doped QDIPs show a photoresponse peak at about $8.3{\mu}m$, ranging from $6{\sim}10{\mu}m$ at 10 K. The intensity of the doped QDIP photoresponse is higher than that of the undoped QDIP on same temperature. Undoped QDIP yields a photoresponse of up to 50 K, whereas doped QDIP has a response of up to 30 K only. This result suggests that the doping level of QDs should be appropriately determined by compromising between photoresponsivity and operating temperature.