• 폴리머
• /
• 제29권4호
• /
• pp.392-398
• /
• 2005

Layer-by-layer(LbL) 흡착에 의한 poly(ethylene-alt-m미? anhydride) (PEMAh)/poly(4-vinyl pyridine) (P4VP) 자기조립 다층박막을 제조하였다. 자기조립 다층막을 이루는 PEMAh/P4VP 두 고분자 사이의 수소 결합과 정전기적 인력이 다층막을 이루는 원동력이라는 것이 푸리에 변환 적외선(FT-IR) 분광분석에 의해서 확인되었다. 다층막의 균일한 자기조립 과정은 PEMAh/P4VP 이중층막의 적층 수 증가에 따른 UV-vis 스펙트럼의 256 nm에서 나타나는 P4VP 특성 흡수 피크의 선형적 증가에 의해서 확인할 수 있었다. 다층막을 이루는 고분자 전해질 담지 용액의 조건 변화가 다층막 형성에 미치는 영향을 살펴보기 위하여 두 고분자 용액의 농도 및 PEMAh 담지용액의 pH를 변화시키면서 다층막을 제조하였다. 다층막의 두께, 흡착된 고분자 전해질 질량 및 표면 거칠기의 변화를 UV-vis 분광 분석, 수정진동자 미량저울(quartz crystal microbalance;QCM) 및 원자 힘 현미경(atomic force microscopy;AFM)을 이용하여 측정하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.533-535
• /
• 2004

We suggest the use of a self-assembled ultra thin organic film that can suppress the hydration of MgO protective layer in AC-PDP. We analyzed the degree of hydration of MgO layer in AC-PDP by XPS when exposed to air after vacuum deposition which proved the effectiveness of the hydration prevention. We also made PDP test panels to demonstrate the improvement in the luminance and luminous efficiency when the hydration of MgO surface is suppressed by the use of self-assembled ultra thin organic film.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.40-44
• /
• 2002

The motivation of this work is to use SAM(Self-Assembled Monolayer) for developing a rapid and flexible non-photolithographic nano-structure fabrication technique which can be utilized in micro-machining of metals as well as silicon-based materials. The fabrication technique implemented in this work consists of a two-step process, namely, mechanical scribing followed by chemical etching. From the experimental results, it was found that thiol on copper surface could be removed even under a few nN normal load. The nano-tribological characteristics of thiol-SAM on various metals were largely dependent on the native oxide layer of metals. Based on these findings, nano-patterns with sub-micrometer width and depth on metal surfaces such as Cu, Au and Ag could be obtained using a diamond-coated tip.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.671-677
• /
• 2018

In this paper, we investigated the vertical alignment characteristics of liquid crystals (LCs) on fluorinated self-assembled monolayers (FSAMs). For comparison, a commercialized homeotropic polyimide (PI) layer was used as an LC alignment layer. We confirmed the successful deposition of FSAMs and the change of FSAMs before and after rubbing treatment through contact angle measurement and atomic force microscopy. The optical transmittance spectrum of the FSAMs is similar to that of the homeotropic PI layer, which is a superior optical characteristic applicable to LC devices. When FSAMs were applied to the vertically aligned (VA) LC cell, uniform and vertical LC alignments were achieved. In addition, the voltage-transmittance characteristic of VA LC cell with FSAMs was superior to that of VA LC cell with the conventional homeotropic PI layers. These results indicate that the FSAMs are suitable as the homeotropic LC alignment layer for enhanced LC devices.

• Journal of Microbiology and Biotechnology
• /
• 제16권1호
• /
• pp.15-19
• /
• 2006

A ferredoxin adsorbed hetero self-assembled layer was fabricated on chemically modified Au substrate, 4-Aminothiophenol (4-ATP) was deposited onto Au substrate and then N-succinimidyl-3-[2-pyridyldithio] propionate (SPDP) was adsorbed on the 4-ATP layer, since SPDP was used as a bridging molecule for ferredoxin adsorption, Ferredoxin/SPDP/4-ATP structured hetero layer was constructed because of strong chemical binding of ferredoxin, SPDP, and 4-ATP, The surface of the ferredoxin-adsorbed SPDP/4-ATP layer was observed by scanning tunneling microscopy, The hetero film formation was verified by surface plasmon resonance measurement. The current flow and rectifying property based on the scanning tunneling spectroscopy I-V characteristics was achieved in the proposed hetero layer. Thus, the hetero layer structure of ferredoxin functioned as a molecular diode with rectifying property, The proposed molecular diode can be usefully applied for the development of molecular scale electronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.291-291
• /
• 2013

The wettability of TiO2 layers is controlled by forming highly ordered arrays of nanocones using nanopatterning, based on self-assembly and dry etching. Nanopatterning of TiO2 layers is achieved via formation of self-assembled monolayers of SiO2 spheres fabricated using the Langmuir-Blodgett technique, followed by dry etching. Compared to a thin film TiO2 layer, the nanopatterned TiO2 samples show a smaller static water contact angle, where the water contact angle decreases as the etching time increases, which is attributed to the Wenzel equation. When TiO2 layers are coated by 1H,1H,2H,2H-perfluorooctyltrichlorosilane, we observed the opposite behavior, exhibiting superhydrophobicity (up to contact angle of $155^{\circ}$) on the nanopatterned TiO2 layers. Self-assembled nanopatterning of the TiO2 layer may provide an advanced method for producing multifunctional transparent layers with self-cleaning properties.

• 한국전자통신학회논문지
• /
• 제4권4호
• /
• pp.301-305
• /
• 2009

Pt 나노입자의 합성과 이를 이용한 hybrid Pt-$SiO_2$ 나노입자의 합성을 성공적으로 수행하였으며, self-assembled Pt nanoparticles monolayer를 charge trapping layer로 활용하는 metal-oxide-semiconductor(MOS) type memory의 한 예로 non-volatile memory(NVM)의 응용을 보임으로써 나노입자의 활용 가능성을 보이고, 또한, hybrid Pt-$SiO_2$ 나노입자 박막 층의 제어를 통한 MOS type memory device에의 보다 더 넓은 활용 가능성을 보이고자 하였다.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.30-37
• /
• 2023

양자점 발광 다이오드(QD-LED)의 효율과 안정성 향상을 위해서 QD 발광층에 주입되는 전하의 균형을 이루는 것은 필수이다. 산화 아연(ZnO)은 최신 QD-LED에서 전자수송층(electron transport layer, ETL)을 구성하기 위해 가장 많이 사용되고 있으나, ZnO의 자발적인 전자 주입은 QD-LED의 성능을 크게 열화시키는 과도한 전자 주입을 유발한다. 본 연구에서는 자기조립단분자막(self-assembled monolayer, SAM) 처리를 통해 ZnO의 전자 주입 특성을 조절하여 QD-LED의 성능을 향상시켰다. 전하 균형도를 향상시킨 결과, SAM을 처리한 QD-LED는 SAM을 처리 안한 소자와 비교하여 내부 양자 효율(external quantum efficiency, EQE)이 25%, 최대 휘도는 200% 향상되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권4호
• /
• pp.227-232
• /
• 2003

A self-assembled monolayer of protein G was fabricated to develop an immunosensor based on surface plasmon resonance (SPR), thereby improving the performance of the antibodybased biosensor through immobilizing the antibody molecules (lgG). As such, 11-mercaptoundecanoic acid (11-MUA) was adsorbed on a gold (Au) support, while the non-reactive hydrophilic surface was changed through substituting the carboxylic acid group (-COOH) in the 11-MUA molecule using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrocholide (EDAC). The formation of the self-assembled protein G layer on the Au substrate and binding of the antibody and antigen were investigated using SPR spectroscopy, while the surface topographies of the fabricated thin films were analyzed using atomic force microscopy (AFM). A fabricated monoclonal antibody (Mab) layer was applied for detecting E. coli O157:H7. As a result, a linear relationship was achieved between the pathogen concentration and the SPR angle shift, plus the detection limit was enhanced up to 10$^2$ CFU/mL.

• Carbon letters
• /
• 제10권4호
• /
• pp.325-328
• /
• 2009

This cycloaddition of [70]fullerene with methyl azidoacetate in benzene under ultrasonic irradiated condition afforded the closed [5,6]-bridged aziridino[70]fullerene derivative, which was unusual product of cycloaddition to the 5,6-junction of fullerene. Its structure was determined by FAB-MS, UV-vis, $^1H-$ and $^{13}C$-NMR spectral data. The closed [5,6]-bridged aziridino[70]fullerene-functionalized gold nanoparticle films were self-assembled using the layer-by-layer method on the reactive of glass slides functionalized with 3-mercaptopropyl trimethoxysilane. The functionalized glass slides were alternately soaked in the solution containing closed the [5,6]-bridged aziridino[70]fullerene and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. The closed [5,6]-bridged aziridino[70]fullerene-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle multilayer films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 527 nm gradually became more evident as successive layers were added to the films.