• Journal of the Korean Home Economics Association
• /
• v.40 no.4
• /
• pp.59-71
• /
• 2002

This study investigated the self wrapping made possible through the anonymity of cuber-space. According to the analysis of the data, which were collected from the online for 2 days, 2,168 respondents were grouped into three types: Those maintaining the strong sense of identity achievement), 53.8%, those experiencing confusion(identity diffusion), 38.3%, and those losing the sense of identity(foreclosure), 7.9%. Among the general respondents, it was reported that the case of sex wrapping was 11.4%, that of occupation, 40.1%, and that of marital status, 60.6%. Specially 11.4% of the sex wrapper took heterogeneous gender identity, while 7% performed dual sex roles. The rate of gender wrapping of female respondents was higher than that of male ones, which reflects female respondents' longing for male sex. Self-disparity between cyber-space and virtual-space was related with the type of self-identity and gender-identity. The rate of self-disparity between cuber-space and virtual-space was 9%. If it occurred continuously, it may cause individual mental division and maladjustment.

• Journal of Welding and Joining
• /
• v.18 no.6
• /
• pp.68-73
• /
• 2000

In case of overalyered wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The overlayered alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is between than martensitic matrix for removing of beadmark of wrapping roll surface.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.216-218
• /
• 2000

In case of hardfaced wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The hardfacing alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is better than martensitic matrix for removing of beadmark of wrapping roll surface.

• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.134-147
• /
• 2006

As modern society set in, lifestyle has been changing largely; leisure activity has been expanded and family activity became important. Changes in the lifestyle caused big changes even in fashion industry. Instead of suits, coordination using clothes easy to wear was extended and the need of family look was also raised. Despite the need and marketability of family look, however, family look style clothes depend on the manufacture by orders on the Internet and few brands have been developed unlike the activation of family restaurants or family fast-food restaurants. Thus, this study examined design of family look style T-shirts applying Korean image as one of measures to activate fashion brands of family look. This study purposed to find out self-conceit and identification of our culture by recreating family look as cultural tourism products applying Korean traditional patchwork wrapping-clothes and natural dying techniques and to globalize the products as high value-added ones containing differentiated Korea-style originality. In particular, as Interest in natural dying has been raised because of serious environmental problems and extension of wellbeing culture, products applying natural dying have been developed actively. At this point of time, the development of family look style T-shirts applying natural dying will contribute largely to planning globalization of our brands by developing products with more polished and globalized design.

• Advances in concrete construction
• /
• v.6 no.5
• /
• pp.423-463
• /
• 2018

This paper investigates the behavior of normal and self-compacted steel fiber reinforced concrete (SCC-SFRC) corbels rehabilitated by Basalt Fiber Mesh (BFM) and Basalt Fiber Fabric (BFF) for the first time in literature. The research objective is to study the effectiveness of BFM and BFF in the rehabilitation of damaged reinforced concrete corbels with and without epoxy injection. The experimental program includes two types of concrete: normal concrete, and self-compacted concrete. For normal concrete, 12 corbels were rehabilitated by BFM without injection epoxy in cracks, with two values of compressive strength, three ratios of steel fiber (SF), and two values of shear span. For self-compacted concrete, 48 corbels were rehabilitated with different parameters where 12 corbels were rehabilitated by BFM with and without epoxy injection, 18 heated corbels with three different high-temperature level were rehabilitated by repairing cracks only by epoxy injection, and 18 heated corbels with three different high-temperature level were rehabilitated by repairing cracks by epoxy and wrapping by BFF. All 48 corbels have two values of compressive strength, three values volumetric ratios of SF, and two values of the shear span. Test results indicate that RC corbels rehabilitated by BFM only without injection did not show any increase in the ultimate load capacity. Moreover, For RC corbels that were repaired by epoxy without basalt wrapping, the ultimate load capacities showed an increase depending on the mode of failure of corbels before the rehabilitation. However, the rehabilitation with only crack repairing by epoxy injection is more effective on medium strength corbels as compared to high strength ones. Finally, it can be concluded that use of BFF is an effective and powerful technique for the strengthening of damaged RC corbels.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.48-59
• /
• 1981

The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2167-2175
• /
• 2015

Autophagy is a self-digestion process, wrapping cytoplasmic proteins or organelles to form vesicles for degradation in lysosomes. The process plays an important role in the maintenance of intracellular homostasis. Here we overview articles on autophagy and cancer/tumors in Pubmed and found 327 articles. Autophagy exists in many tumors and is involved in cell malignant transformation and tumor cell growth. In early phases of tumorigenesis, autophagy clears the abnormally folded proteins and dysfunctional organelles such as mitochondria. Autophagy can also inhibit cell stress responses and prevent genetic damage. When a tumor develops, autophagy helps tumor cells survive nutritional deficiencies and hypoxic conditions. Studies of autophagy in the occurrence and progression of tumors should provide new therapeutic strategies for tumors.

• Korean Journal of Bronchoesophagology
• /
• v.10 no.2
• /
• pp.17-21
• /
• 2004

Background Insertion of tracheal stent in the treatment of benign tracheal & bronchial disease has increased since the introduction of expandable metallic stent. Material & Methods : Between Jan, 1995 and Feb. 2004, eight patients who had benign tracheo-bronchial disease underwent insertion of expandable metallic tracheal stent. We retrospectively analyzed stent insertion indications, complications, and following the result. Results : Surgical indications were post-intubation tracheal stenosis (1 case), tracheal stenosis following tracheal surgery (2 cases), tracheo-esophageal fistula (2 cases), broncho-pleural fistula(1 case), left main bronchus stenosis following bronchoplasty (1 case), and left main bronchus stenosis due to mediastinal repositioning (1 case). Expandable metallic tracheal stent was inserted in five patients to resolve dyspnea caused by airway obstruction, and to prevent recurrent pneumonia in three patients. The complication developed in 6 patients $75\%$; 3 cases of distal stenosis due to growth of granulation tissue, and one case each of tearing of posterior membrane, aggravation of tracheo-esophageal fistula, and airway partial obstruction due to stent migration. The stent was removed in 5 patients and tracheal surgery (tracheal resection and end to end anastomosis with primary repair of esophagus, pericardial patch tracheo-bronchoplasty, tracheal repair and omental wrapping) was performed in 3 patients. Conclusion Insertion of self expandable metallic stent in benign tracheo-bronchial disease is an effective means of relieving dyspnea for only a short period, and it did not increase the long term survival. Better means of treatment of benign tracheo-bronchial stenosis in necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.1-8
• /
• 2020

This paper proposes architectural and evacuation recommendations through evacuation experiments of two child care centers with disabilities. To achieve these purposes, a survey on the architectural characteristics and evacuation experiments was carried out. The results were as follows: (1) the child care center with disabilities were located within one kilometer or five minutes from a fire station and 119 safety center, but the architectural characteristics and the ratio of self-moving children in a care center were very different conditions. (2) The evacuation behavior patterns of children with a disability were as follows: hugging a child by a teacher with the arms, walking with hugging and holding the child by a teacher, moving a wheelchair with a helper, and drag-out a cerebral palsied child with a mat wrapping. (3) The speed of the evacuation was fast in the following order: drag-out with a mat wrapping a child with a disability, hugging the child with the arms, walking with hugging and holding child, and moving with a wheelchair. In the case of difficulties in the vertical evacuation, a temporal evacuation area was essential for children with disability.

• The Korean Journal of Community Living Science
• /
• v.15 no.3
• /
• pp.21-28
• /
• 2004

Marketing of traditional doenjang (a kind of fermented soybean product) is now focusing on its health advantages, being proven to have anti-viral, anti-cancer and anti-oxidant effects. The purpose of this study is to investigate the consumption patterns of traditional doenjang in the households managed by different generations of women living in Gyeonggi area. Six hundred housewives answered the questionnaire. Statistical analyses were performed on 590 subjects using SAS (ver 8.1). Chi-square tests and General Linear Models were used. The age distribution of housewives was as follows: 42.9% were in their 30s; 40.9% were in their 40s; and 16.2% were in their 50s. 57.5% of subjects graduated with high school education while 72.8% of subjects did housework only. Overall, 47.2%, prepared their doenjang themselves, while the remainder purchased it or received it from relatives. This percentage differed however according to age group, as self-preparation of doenjang was found in only 22% of housewives in their 30s, but increased to 83% of subjects in their 50s. 53.4% of subjects had their doenjang donated to them by relatives, compared with only 3.1 % of subjects in their 50s. Most of dishes using doenjang were soups and stews. Those housewives in their 50s made significantly higher use of doenjang in soup, wrapping vegetables (ssamjang), seasoning, and flat cake (jangttok). Doenjang dishes were prepared for the husband in the family 59.2% of the time, followed by housewives 15.4% of the time. Annual consumption of doenjang was 5.1kg. and Kanjang was 4.4L per household; there was no significant difference between the age groups respecting annual consumption. From such results, we may assume a decrease in home-made doenjang among younger generations and an increase in the amount of purchased doenjang. We can predict an increased need for doenjang of better quality. Also the development of new products such as ready-to-eat or fast food variants would better serve the trend towards convenience.