• Journal of Korea Water Resources Association
• /
• v.53 no.7
• /
• pp.545-555
• /
• 2020

A feasibility modeling for potential hydroelectric dam site selection was suggested using 1 sec ASTGTM (ASTER Global Digital Elevation Model) and Terra/Aqua MODIS (Moderate Resolution Imaging Spectroradiometer) derived land use (MCD12Q1) data. The modeling includes DEM pre-processing of peak, sink, and flat, river network generation, watershed delineation and segmentation, terrain analysis of stream cross section and reservoir storage, and estimation of submerged area for compensation. The modeling algorithms were developed using Python and as an open source GIS. When a user-defined stream point is selected, the model evaluates potential hydroelectric head, reservoir surface area and storage capacity curve, watershed time of concentration from DEM, and compensation area from land use data. The model was tested for 4 locations of already constructed Buhang, BohyunMountain, Sungdeok, and Yeongju dams. The modeling results obtained maximum possible heads of 37.0, 67.0, 73.0, 42.0 m, surface areas of 1.81, 2.4, 2.8, 8.8 ㎢, storages of 35.9, 68.0, 91.3, 168.3×10⁶ ㎥ respectively. BohyunMountain and Sungdeok show validity but in case of Buhang and Yeongju dams have maximum head errors. These errors came from the stream generation error due to ASTGTM. So, wrong dam watershed boundary limit the head. This study showed a possibility to estimate potential hydroelectric dam sites before field investigation especially for overseas project.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.2
• /
• pp.83-92
• /
• 1976

The relationships between various nitrogen efficiencies among 57 rice cultivars grouped into three developmental categories were investigated by simple correlation with (12kg/10a) and without nitrogen fertilizer under the field condition. The relationship showed similar in a group or among all varieties of three groups. Yield among varieties showed highly significant correlation with Fe (fertilization efficiency: yield increment/nitrogen applied), E (nitrogen efficiency for yield), Ef(efficiency of nitrogen derived from fertilizer) and Eu (fertilizer use efficiency: nitrogen derived from fertilizer divided by total nitrogen applied). The E was correlated significantly and positively with harvest index (HI), percent translocation (T) of nitrogen to ear and negatively with nitrogen uptake amount (N), nitrogen concentration in grain (GN%) and in straw (SN%). The E depends almost on Ef and only inTongil group partly on Es (efficiency of nitrogen derived from soil). The Ef contributes to Fe more than Eu does (Fe = $Ef{\cdot}Eu$). It appears that Ef and Eu increased from the old group to the recommended local varieties, but only EF and Es increased markedly when rice was developed from recommended local group to Tongil line ($indica{\times}japonica$ hybrid selction). The fact that E and Fe depend more on Ef among rice varieties is very good contrast to the result that E and Fe depend more on Es and Eu respectively among soils in the previous investigatigation. The Ef appears as the most important parameter for rice varietal selection under fertilizer application system.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.328-336
• /
• 2020

Parachlorella sp. is an efficient fatty acid producer that can be used in the production of biofuels, feeds, and fertilizers. Microalgae show varying responses to culture conditions, even those within the same species. In this study, growth and fatty acid composition of a newly isolated Parachlorella sp. from the Nakdong river of Korea in different culture media were investigated. The microalga was cultivated in 400 ml bubble column photobioreactors using BG-11, BBM, TAP, and modified TAP (MTAP) media. It was shown that using BBM led to greater fatty acid accumulation (34%), while using TAP medium led to greater biomass productivity (0.34 g/l/day). Composition of the TAP medium was modified to have the N:P ratio of BBM while also varying concentrations of N and P to improve fatty acid productivity. One of the modified TAP media, MTAP-1 (104.8 mgN/l, 135.2 mgP/l, N:P ratio = 0.77), showed the highest fatty acid concentration of 0.69 ± 0.04 g/l, while those from TAP and BBM were 0.48 ± 0.06 g/l and 0.40 ± 0.02 g/l, respectively. The results showed that microalgal fatty acid productivity could be enhanced by changing the N:P ratio and concentrations.

• Journal of Food Hygiene and Safety
• /
• v.35 no.1
• /
• pp.83-92
• /
• 2020

This study investigated the optimal conditions of enzymatic reaction for production of isomaltooligosaccharides (IMO) using rice flour. To manufacture IMO, commercial enzymes (Termamyl 2X, Maltogenase L, Promozyme D2, Fungamyl 800L and Transglucosidase L) were used. The sugar composition and amount of IMO were examined by HPLC with charged aerosol detector (HPLC-CAD) in each manufacturing process. Liquefaction reaction was performed according to different Termamyl 2X concentrations (0.025%, 0.05%, 0.075%, 0.1%) and reaction times (1 h, 2 h). As a result, the reducing sugar content was the highest at 138.26 g/L when 0.075% Termamyl 2X was added for 2 hours. In order to optimize simultaneous saccharification and transglucosylation, experiments on enzyme selection, enzyme concentration and enzyme reaction time were conducted. Reaction with 0.0015% Maltogenase L, 0.05-0.1% Promozyme D2 and 0.1% Tansglucosidase L was effective in decreasing glucose content and increasing content of IMO with a high degree of polymerization. A change in sugar content was observed every 6 hours to determine the optimal reaction time, and the highest IMO was produced after 36 hours of reaction (75.36 g/L). The IMO prepared under optimal conditions showed isomaltose, 35.11 g/L; panose, 11.97 g/L; isomaltotriose, 19.95 g/L; isomaltotetraose, 7.46 g/L; isomaltopentaose, 1.05 g/L at 18 brix and the ratio of IMO in the total sugar was 56.37%.

• Journal of Life Science
• /
• v.20 no.6
• /
• pp.922-928
• /
• 2010

This study was carried out to develop safe and novel anticoagulation agents from oriental medicinal herbs. From 33 medicinal herbs, 40 different ethanol extracts were prepared according to place of origin or extraction parts, and anticoagulation activities were evaluated by determination of thrombin time (TT), prothrombin time (PT) and activated partial thromboplastin time (aPTT). The average water content and average extraction ratio for the medicinal herbs were $6.85{\pm}2.26%$ and $5.27{\pm}4.25%$, respectively. Evaluation of TT at various concentrations of the extract led to the selection of Mucuna birdwoodiana, Prunus armeniaca, Cacalia ainsliaeiflora, Cinnamonum aromaticum, and Rhus javanica Linneas potent antithrombosis medicinal herbs. Evaluation of PT and aPTT showed that the extracts of R.javanica Linne, M. birdwoodiana, and P. armeniaca have strong anticoagulation activities. Determination of hemolytic activities of 40 different ethanol extracts against human red blood cells, however, showed that only M. birdwoodiana, C. ainsliaeiflora, C. aromaticum, and R. javanica Linnehas strong anticoagulation activity without hemolytic activity at a concentration of 500 mg/ml. Our results suggest that oriental medicinal herbs, which are under a mass-production system, have potentialas a safe and novel source of anticoagulants, as well being a thrombin-specific and coagulation factor-specific inhibitor.

• Journal of Wetlands Research
• /
• v.21 no.3
• /
• pp.244-250
• /
• 2019

Due to the industrial development and population growth, it has recently been shown that there are many problems caused by the rinked treatment water in local goverments and sewage treatment plants. The rinked treatment water has a characteristic of low flow rate and high concentration unlike general sewage. These characteristics increase sewage treatment difficulty and sewage treatment fee of sewage treatment facilities. Among the many influencing factors that increase sewage treatment unit cost, 'linked treatment load/design inflow load (%)' was derived as the most correlated factor. Through the selection and modeling of sewage treatment plants, the excess scope of design discharge water quality was investigated under the conditions of temperature and the conditions of 'linked treatment load/design inflow load (%)' taking into account the effects of the four seasons. The study found that for TN, 'linked treatment load/design inflow load (%)' was 19.7%, 22.6%, 25.1%and 27.7%, respectively, under conditions of $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$. In case of TP, 'rinked treatment load/design inflow load (%)' was 10.7%, 12.2%, 15.6% and 17.5% at $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, and $25^{\circ}C$, respectively, under conditions of $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.139-145
• /
• 2021

Through this study, we intend to study user satisfaction in order to verify whether there is a need for full-scale research, development and commercialization of document viewers in a VR environment. VR content consists of realistic 3D graphics and 360-degree video, and provides a synesthesia experience and immersion. We developed and tested a VR document viewer prototype that can utilize this concept as a document viewing system. It can act as a viewer that provides an interactive viewing environment according to the user's body interaction and the direction of the field of view, and it can be said that the feature of VR document viewer is that it can draw the user's high level of immersion and concentration when using the viewer. The developed prototype was tested in a test group consisting of 100 VR experiences and device owners for about 1 hour and 3 days a day, and then a questionnaire survey in the form of a fixed selection question was conducted. This study is a prototype study of a document viewer suitable for a virtual reality environment, and can lead to a sense of immersion when reading a document, and suggest a new document viewer direction that is effective for visual fatigue and visual perception of the document.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.3
• /
• pp.113-132
• /
• 2016

Positioning technique which has been widely used for making marketing strategy by analyzing customer's image also has been used for public and test-taker's image analysis about public facilities, entrepreneurs, universities. This study analyze image of library and Information science students who trying to find a job in library fields about diverse types of library and information centers by Positioning technique. As a result of Similarity cognition analysis by multidimensional Scaling and K-means clustering, it was found that students recognize that public, national, university, school library are similar, on the other hand, portal company and special library are different from those types. In the jobs, user service jobs and technical service jobs are recognized as separated clusters, and cultural program job is also recognized dissimilarly from those clusters. By the way, images about work satisfaction and stability of employment shows high in national library; high wage shows high in portal company; employee's growth potential shows high in special library; job importance shows high in reference service jobs; difficulty shows high in content's job. Anyway, in the workplace selection, almost students regard stability of employment as top priorities, accordingly they prefers public library at most. Such a preference concentration tendency is strongly appeared in local university students than in metropolitan area students as a result of Pearson's chi-square test.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.223-228
• /
• 1988

To select $SO_2$-resistant tree species, leaf disks of 6mm in diameter, cut from the leaves of 6 species (Wistaria floribunda, Magnolia obovata, Rosa multiflora, Liriodendron tulipifera, Robinia pseudo-acacia and Acer palmatum) were floated on 25ml of testing medium and placed on laboratory under fluorescent lamp (1,500 Lux) for 20 hours. Chlorophyll content and acidity of the testing medium were measured. Testing medium was prepared by diluting $H_2SO_4$, $H_2SO_3$ and $Na_2SO_4$ with distilled water for various stoichiometric $SO_2$ concentrations, 0, 25, 50, 100 and 250 ppm. Total chlorophyll content was more decreased after treatment than before treatment, and was decreased more severely in $H_2SO_3$ sources, followed by $H_2SO_4$ and $Na_2SO_4$, sources. Decreasing rate of total chlorophyll content was generally large in Acer palmatum. Magnolia obovata and Wistaria floribunda, and was relatively small in Rosa multiflora, Liriodendron tulipifera and Robinia pseudo-acacia. Decreasing rate of chlorophyll content may be useful index for judging susceptifility of the leaf to $SO_2$. The acidity of the testing medium was generally decreased after treatment, and it means that cell leakage was occurred during treatment. The differences in medium acidity between before and after treatment may be poot index for susceptibility of the leaf to $SO_2$ owing to the difference among tree species in development of leaf mesophyll, acidity maintaining mechanism and butter capacity of the leaf tissue.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.49-60
• /
• 2019

With the appearance of self-driving cars and electric cars, the automobile industry is rapidly changing. In the midst of these changes, HMI studies are becoming more important as to how the driver obtains safety and convenience with controlling the vehicle. This study sought to understand how automobile manufacturers understand the driving situation, and how they define and limit driver interaction. For this, prior studies about HMI were reviewed and 15 participants performed an on-road study to drive vehicles from five manufacturers with using their interfaces. The results of the study confirmed that buttons and switches that are easily controlled by the user while driving were different from manufacturer to manufacturer. And there are some buttons that are more intensively controlled and others that are difficult to control while driving. It was able to derive 'selection and concentration' from Audi's vehicle, 'optimization of the driving ' from BMW's, 'simple and minimize' from Benz's vehicle, 'remove the manual distraction' from the vehicle of Lexus, and 'visual stability' from KIA's vehicle as the distinctive keywords for the HMI. This shows that each manufacturer has a different definition and interpretation of the driver's driving control area. This study has a distinct value in that it has identified the characteristics of vehicle-specific HMI in actual driving conditions, which is not apparent in appearance. It is expected that this research approach can be useful to see differences in interaction through actual driving despite changes in driving environment such as vehicle platooning and self-driving technology.