• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.163-175
• /
• 2017

In land seismic exploration, irregular surface topography and weathering layer in near surface distorts the reflected signals of data. Therefore, typical land seismic data should be compensated for this distortion by static correction. To perform the static correction, near-surface velocity is required, which can be obtained by seismic refraction survey. However, land seismic data is often acquired in a limited form of geometry depending on the equipment availability, accessibility condition, and permission for the survey site. In this situation, refraction analysis should be performed using reflection data because it is impossible to acquire refraction-oriented data due to limited source and receiver geometry. In this study, we aimed to analyze the reliability of the results obtained by refraction traveltime tomography when using reflection data with a limited number of sources and receivers from irregular surface topography. By comparing the inversion result from irregular topography with that from flat surface, we found that the surface topography affects the reliability of the inversion results to some degree. We also found that the number of sources has little effect on the inversion results unless the number of sources are very small. On the other hand, we observed that velocity distortion occurred in the overlapped part of receiver arrays when using a limited number of receivers, and therefore suggested the size of the least overlapping ratio to avoid the velocity distortion. Finally, we performed numerical tests for the model which simulates the surface topography and acquisition geometry of the survey region and verified the reliability analysis of inversion results. We identified reliable areas and suspicious area of the inverted velocity model by applying the analysis results to field data.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.227-241
• /
• 2022

Full waveform inversion (FWI) in the field of seismic data processing is an inversion technique that is used to estimate the velocity model of the subsurface for oil and gas exploration. Recently, deep learning (DL) technology has been increasingly used for seismic data processing, and its combination with FWI has attracted remarkable research efforts. For example, DL-based data processing techniques have been utilized for preprocessing input data for FWI, enabling the direct implementation of FWI through DL technology. DL-based FWI can be divided into the following methods: pure data-based, physics-based neural network, encoder-decoder, reparameterized FWI, and physics-informed neural network. In this review, we describe the theory and characteristics of the methods by systematizing them in the order of advancements. In the early days of DL-based FWI, the DL model predicted the velocity model by preparing a large training data set to adopt faithfully the basic principles of data science and apply a pure data-based prediction model. The current research trend is to supplement the shortcomings of the pure data-based approach using the loss function consisting of seismic data or physical information from the wave equation itself in deep neural networks. Based on these developments, DL-based FWI has evolved to not require a large amount of learning data, alleviating the cycle-skipping problem, which is an intrinsic limitation of FWI, and reducing computation times dramatically. The value of DL-based FWI is expected to increase continually in the processing of seismic data.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.170-176
• /
• 2005

Recently the velocity stack inversion is having many attentions as an useful way to perform various seismic data processing. In order to be used in various seismic data processing, the inversion method used should have properties such as robustness to noise and parsimony of the velocity stack result. The IRLS (Iteratively Reweighted Least-Squares) method that minimizes ${L_1}-norm$ is the one used mostly. This paper introduce another method, CGG (Conjugate Guided Gradient) method, which can be used to achieve the same goal as the IRLS method does. The CGG method is a modified CG (Conjugate Gradient) method that minimizes ${L_1}-norm$. This paper explains the CGG method and compares the result of it with the one of IRSL methods. Testing on synthetic and real data demonstrates that CGG method can be used as an inversion method f3r minimizing various residual/model norms like IRLS methods.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.317-322
• /
• 2007

Seismic exploration is divided by reflection and refraction method greatly, and reflection method can analyze complicated underground structure in the basis high resolution image, and refraction method can grasp the velocity structure of underground accurately. This thesis confirmed application of mixed exploration techniques using advantages of reflection and refraction. Reflection data processing applied conventional technique, and inversion of refraction data applied travel time tomographic technique that using SIRT method. Also, could establish initial information in model variable and improved the result of inversion by restricting model parameter value and dimension of area. Confirmed efficient fact in sequence and velocity structure grasping by utilizing accurate initial velocity model made out on the basis of marine reflection data, and mixed exploration technique using reflection and refraction have propriety that can trust in field application.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.69-72
• /
• 2008

EZTOMO is a crosswell seismic tomography software system. The system has capability of event picking, raytracing, inversion, error analysis, and visualization of the processing results. Waveform of the first arrival signal has been utilized to select the event of the first motion, and uncertainty measured in estimation of the first breaks has been utilized to improve the inversion process.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.58-63
• /
• 2007

We developed a new algorithm for jointly inverting dc resistivity and seismic travel time tomography data based on the multiple constraints: (1) structural similarity based on cross-gradient, (2) correlation between two different material properties, and (3) a priori information on the material property distribution. Through the numerical experiments of surface dc resistivity and seismic refraction surveys, the performance of the proposed algorithm was demonstrated and the effects of different regularizations were analyzed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.124-129
• /
• 2007

For seismic imaging and inversion, the inverted image depends on how we define the objective function. ${\ell}^1$-norm is more robust than ${\ell}^2$-norm. However, it is difficult to apply the Newton-type algorithm directly because the partial derivative for ${\ell^1$-norm has a singularity. In our paper, to overcome the difficulties of singularities, Huber function given by hybrid ${\ell}^1/{\ell}^2$-norm is used. We tested the robustness of our new object function with several noisy data set. Numerical results show that the new objective function is more robust to band limited spiky noise than the conventional object function.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.291-296
• /
• 2006

The aspect of wave propagation around cavity was investigated for the exact inversion of crosshole tomography data in order to understand the possibility of the existence of underground cavity. We found that the adequate frequency range for the tunnel investigation was about 2kHz to 5kHz, and the grid space was set up to 1/10 length of wavelength. The propagation of the seismic wave near the cavity may go through or detour the cavity according to the seismic velocity of inside of cavity. The detouring wave propagates with the seismic velocity of mother rock in spite of the velocity of inside of cavity. The smaller the velocity difference between the mother rock and cavity, the more frequent penetration of the seismic wave through the cavity was appeared.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.63-68
• /
• 2003

Non-destructive method by tomography for safety diagnosis of civil engineering and building structures is tried. There are traveltime tomography that uses traveltime and fullwave tomography that uses the initial shock and seismic amplitude. But these methods have difficulty and weak points in accuracy and selection of initial value. In this study, corrected inversion method which is able to solve the two difficulty and this method is applied to theoretical pier model to calculate tomography.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.377-382
• /
• 2007

Several prospecting methods have been used to detect deep seated small tunnel in Korea. Tunnel interpretation of seismic method has been performed mainly by wave traveltime inversion method. But it often gives inacurate solution for the exact tunnel position because of the short distance between two measuring boreholes and picking errors of first arrivals. In this study, "error tomogram" was proposed to detect tunnel position and applied to theoretical and field dat using multi-source amplitude data.