• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.182-188
• /
• 1998

The effect of arbuscular mycorrhizae(AM) on the growth of trifoliate orange seeding were investigated in volcanic ash soil. Trifoliate orange is used as a root stock of citrus in Cheju island. Seedings innoculated with AM fungi were grown for 16 weeks in pots of various levels of fertilizer. Growth characteristics and mineral nutrient contents were measured and spores of AM fungi colonized were identified. Seventy % of the replicsted pots of seedings were colonized by AM in the treatment of high level fertilizer and additional phosphate (40g of 21-17-17 complex fertilizer and 50g of fused phosphate added to 50L of soil). In treatments of low levels fertilizer or without fused phosphate addition, the pots colonized were less than 20 %. Colonization of trifoliate seedings with AM fungi greatly increased the growth of seedings. Shoot length and weight of shoot and root positively regressed on AM colonization ratio. AM colonization caused higher concentrations of P, Cu and Mg in plant, and the relations were significant at 5 % level. Contents of N and Zn in plants also tended to increase, while that of Ca to decrease, with increasing colonization ratio. Four species of AM fungi - Glomus deserticola, G. rubiforme, G. vesiculiferum and Acaulospora sp, - were found in the soil where roots of trifoliate orange as an innoculation materials were collected. All of the 4 species were found in the inoculated pot soils after the seedling growth, indicating that these species can be colonized in trifoliate orange roots.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2002

Chufa (Cyperus esculentus L.) belongs to one of the sedge family and pows well in summer. The aboveground part of chufa is mostly consisted of leaves and the underground part is mostly composed of a clump of fibrous root with tuber. At the seeding year, it does not reproductive development but produces a lot of tuber. It produced many tillers from the tuber and grows in clumps as a bunch type. The plant height of mature chufa was 73 to 75cm and it grown fully in the middle of July. The number of tillers were increased rapidly until the end of July and still increased slowly after August but it showed very poor growth. The final fresh weight and dry matter yield of aboveground part of chufa were 40.3 tou/ha and 12.1 tou/ha. respectively. The regrowth of aboveground part was vigorous in the early stage of growth after 1st cutting but it was decreased rapidly after the second cutting. In control plot, the number of tubers per a clump were 722 at final stage and their fresh and drymatter yields per m: were 4.2kg and 1.9kg, respectively. In experimental plots, the amount of tubers was decreased steadily according to delay of cutting date, but late cutting date was not affect the tuber formation severely because the tuber produced already early in August. The nutritive value of chufa in vegetative growth stage was good but it was decreased according to growing up. The contents of crude protein(CP), neutral detergent fiber(NDF), dry matter digestibility (DMD) and total digestible nutrients(TDN) of aboveground part of chufa harvested finally were 6.1%, 51.5%, 39.8%, 33.2% and 39.4％, respectively. The contents of crude protein(CP), neutral detergent fiber(NDF), dry matter digestibility(DMD) and total digestible nutrients(TDN) of tubers of chufa were 6.1%, 81.5%, 39.8%, 33.2% and 39.4%, respectively and the content of oil was as high as 16.2%, especially.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.1
• /
• pp.31-36
• /
• 2002

The yield and quality of winter forage crops such as oats could increase by mixed sowing with a winter legume such as hairy vetch(Vicia villosa Roth). The purpose of this study was to improve the forage quality and productivity using Oat-Hairy vetch mixture in winter season for three years. The results of this experiments were summarized as follows. In mix seeding of oat and hairy vetch, the dry matter(DM) content of herbage was 15∼16% in fall-harvest and 19∼20% in spring-harvest. Crude protein(CP) content of hairy vetch was the highest as 30.1% and the mixture was higher than that of oat. Acid detergent fiber(ADF) and neutral detergent fiber(NDF) content of hairy vetch was lower, but in vitro dry matter digestibility(IVDMD) and total dry matter digestibility(TDN) content was higher than that of oat. Although oat showed the low yield by 3.7∼4.4 DM t/ha, the Fall-seeded-Spring-harvest hairy vetch plot showed highly production by 9.5 DM t/ha. Crude protein and TDN yield of Fall-seeded-Spring-harvest plots were higher than those of others. According to this study, the highest dry matter yield could be obtained by Fall-seeded-Spring-harvest. It would be recommend in cropping field for oat.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.2
• /
• pp.123-128
• /
• 2007

A study was conducted over two years to determine the temperate mixtures of grasses for grazing horses in Jeju, Korea. The experiment field located at 450 m altitude (Jeju Horse Training Center of Korea Racing Association) was divided into 3 different mixtures plots (3 replications) without a fence between treatments, and sown by three main grasses (orchardgrass, perennial ryegrass and timothy). Seven castrated adult horses were kept on pasture from the middle of April to the end of November without supplementary concentrates. The dry matter yield, percentage of grasses intake and botanical composition were determined during the grazing period. Nutrients in grasses and soils were analyzed. The dry matter yield during two-year experimental period was not different among mixtures (11,000-12,000 kg/ha/year). In botanical composition, perennial ryegrass was dominant in all mixtures during spring through early summer season, but faded away during hot summer season. Timothy seemed to be more resistant against a hot or dry weather than other grasses. The percentage of grasses intakes was higher in the mixture of timothy than those in other mixtures. The contents of NDF (neutral detergent fiber) and ADF (acid detergent fiber) were not different among different mixtures. These results indicate that the mixture of timothy, orchardgrass, perennial ryegrass and white clover (20, 5, 5, 2 kg/ha as a seeding rate) can be used for gazing pasture of horses in the high altitude of Jeju.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.68-74
• /
• 2013

For the coating of diamond films on WC-Co tools, a buffer interlayer is needed because Co catalyzes diamond into graphite. W and Ti were chosen as candidate interlayer materials to prevent the diffusion of Co during diamond deposition. W or Ti interlayer of $1{\mu}m$ thickness was deposited on WC-Co substrate under Ar in a DC magnetron sputter. After seeding treatment of the interlayer-deposited specimens in an ultrasonic bath containing nanometer diamond powders, $2{\mu}m$ thick nanocrystalline diamond (NCD) films were deposited at $600^{\circ}C$ over the metal layers in a 2.45 GHz microwave plasma CVD system. The cross-sectional morphology of films was observed by FESEM. X-ray diffraction and visual Raman spectroscopy were used to confirm the NCD crystal structure. Micro hardness was measured by nano-indenter. The coefficient of friction (COF) was measured by tribology test using ball on disk method. After tribology test, wear tracks were examined by optical microscope and alpha step profiler. Rockwell C indentation test was performed to characterize the adhesion between films and substrate. Ti and W were found good interlayer materials to act as Co diffusion barriers and diamond nucleation layers. The COFs on NCD films with W or Ti interlayer were measured as less than 0.1 whereas that on bare WC-Co was 0.6~1.0. However, W interlayer exhibited better results than Ti in terms of the adhesion to WC-Co substrate and to NCD film. This result is believed to be due to smaller difference in the coefficients of thermal expansion of the related films in the case of W interlayer than Ti one. By varying the thickness of W interlayer as 1, 2, and $4{\mu}m$ with a fixed $2{\mu}m$ thick NCD film, no difference in COF and wear behavior but a significant change in adhesion was observed. It was shown that the thicker the interlayer, the stronger the adhesion. It is suggested that thicker W interlayer is more effective in relieving the residual stress of NCD film during cooling after deposition and results in stronger adhesion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.497-502
• /
• 1997

A seed pelleting technique was developed for easy handling of small sesame seeds (Chinbaeckkae) and for direct seeding in field. The mixture of pelleting material, binder(sodium alginate) and seeds were dropped in 100mM CaCl$_2$ solution. Charcoal was appeared as a best material among all to make pellets with the characters of hardness, breakdown, destruction rate and germination percentage. Zeolite formed the hardest pellet seeds among the materials and 1~3 seeds contained in a pellet on the treatment of 87g of sesame seeds mixed in 1$\ell$ CaCl$_2$ solution was estimated optimum rate of seed mixure with few appearance of seedless pellet. The moisture absorption rate was greater in the order of peat＋charcoal > peat > charcoal > zeolite. Germination percentage of pelleted seeds with charcoal was the best and similar to that of common non-treated seeds. Germination percentage of pelleted seeds by sowing depth of exposing a quarter of pellet seeds on the surface of vermiculite germination test box and were 92％ in charcoal treatment and was the best among all released materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.5
• /
• pp.535-541
• /
• 1996

A seed pelleting technique was developed for easy handling of small tobacco seeds (variety, NC82) and for direct seeding in temperary planting bed or in field. The mixture of pelleting material, binder and seeds were moulded in cylindrical holes sized 2 mm diameter and 2 mm height in a plastic plate. Bentonite and cellulose powder were good materials to make pellets with CMC as binder, and bentonite formed the hardest pelleted seeds among the materials. The number of the pelleted seeds made with the same weight of the materials was different with materials used and the number of seeds contained in a pelleted seed could be controlled by mixture ratio of materials and seeds. The seedless pellets ranged 6.9 to 16.0% at the ratio of pelleting material and seed for 2~3 seeds in a pellet. The moisture absorption rate at 100% RH and $25^{\circ}C$ was greater in the order of clay < bentonite < cellulose. Germination rates of pelleted seeds with bentonite and cellulose were similar to that of usual seed, but it was significantly lower with clay pelleted seeds.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.5
• /
• pp.53-67
• /
• 2011

The major objective of this study was to quantify the effects of substrate depth and substrate composition on the development of sedum etc., in a sloped rooftop (6 : 12 pitch) environment during a 4-year period. The experiment was conducted from 2006 October to 2010 December under several conditions without soil erosion control : two substrate depth (5cm, 10cm), four substrate composition (A5N3C2, A3N3C4, A6C4, G5L3C2: A: artificial lightweight soil, N : natural soil, G : granite decomposed soil, C : leave composite, L : loess), four sloped roof direction ($E40^{\circ}W$, $W40^{\circ}N$, $S40^{\circ}W$, $N40^{\circ}E$). In this experiment 4 sedum etc., were used: Sedum sarmentosum, Sedum kamtschaticum, Sedum rupestre, Sedum telephium, flowering herbs (mixed seed : Taraxacum platycarpum, Lotus corniculatus, Aster yomena, Aster koraiensis), western grasses (mixed seed : Tall fescue, Creeping redfescue, Bermuda grass, Perennial ryegrass). The establishment factor had two levels : succulent shoot establishment (sedum), seeding (flowering herbs, western grasses). 1. Enkamat, as it bring about top soil exfoliation, was unsuitable material for soil erosion control. 2. Sedum species exhibited greater growth at a substrate depth of 10cm relative to 5cm. All flowering herbs and western grasses established only at a substrate depth of 5cm were died. A substrate depth of 5cm was not suited in sloped rooftop greening without maintenance. If additional soil erosion control will be supplemented, a substrate depth of 10cm in sloped rooftop greening without maintenance was considered suitable. 3. For all substrate depth and composition, the most abundant species was Sedum kamtschaticum. The percentage of surviving Sedum kamtschaticum was 73.4% at a substrate depth of 10cm in autumn 2007 one year after the roof vegetation had been established. But the percentage of surviving other sedum were 33.3%~51.9%, therefor mulching for soil erosion control was essential after rooftop establishment in extensive sloped roof greening was proved. To raise the ratio of plant survival, complete establishment of plant root at substrate was considered essential before rooftop establishment. 4. There was a significant interaction between biomass and substrate moisture content. There were also a significant difference of substrate moisture and erosion among substrate composition. The moisture content of A6C4 was highest, the resistance to erosion of A5N3C2 was highest among substrate composition. The biomass of plants were not significantly higher in A5N3C2 and A6C4 relative to A3N3C4 and G5L3C2, For substrate moisture and erosion resistance, A5N3C2 and A6C4 were considered suitable in sloped rooftop greening without maintenance. 5. There were significant difference among roof slope direction on the substrate moisture. Especially, the substrate moisture content of $S40^{\circ}W$ was lower relative to that of $N40^{\circ}E$, that guessed by solar radiation and erosion.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.129-136
• /
• 2004

Jeju native sorghum was grown at six spot seeding rates (1, 2, 3, 4, 5 and 6) from April 3 to september 6, 2000 in Jeju island to determine influence of number of seeds per hill in dibbling on agronomic characters, forage yield and qualities. Days to heading was increased as number of seeds per hill was increased. Plant height with three seeds per hill (206.7 cm) was the longest, while with six seeds per hill (175.2 cm) was the shortest. Fresh forage, dry matter and crude protein yield and total digestible nutrient (TDN) were the greatest at the three seeds per hill (48.1, 10.1, 0.9, 5.1 MT/ha). Crude protein, crude fat and nitrogen-tree extract (NFE) increased with the number of seeds per hill increased but crude fiber and crude ash decreased.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.1
• /
• pp.53-61
• /
• 2020

Cell migration is a central process for recovering from wounds triggered by physical distress besides embryogenesis and cancer metastasis. Wound healing assay is widely used as a fundamental research technique for investigation of two-dimensional cell migration in vitro. The most common approach for imitating physical wound in vitro is mechanical scratching on the surface of the confluent monolayer by using sharp materials. The iron metal pin with a suspension spring for fine adjustment of the orthogonal contact surface between the scratching point and the individual bottom of multi-well plate with planar curvatures were adopted for the creative invention of a 96-well plate wound maker. While classic tips drew diverse and zigzag scratching patterns on the confluent monolayer, our wound maker displayed synchronized linear wounds in the middle of each well of a 96-well plate that was seeded with several cell lines. Given that several types of multi-well plates commercially available are compatible with our lab-made wound maker for creating uniform scratches on the confluent monolayer for the collective cell migration in wound healing assay, it is certain that the application of this wound maker to the real-time wound healing assay in high content screening (HCS) is superior than utilization of typical polypropylene pipette tips.