• The Korean Journal of Ceramics
• /
• v.4 no.2
• /
• pp.90-94
• /
• 1998

Self diffusion coefficients of $^{67}$Co and impurity diffusion coefficients of $^{51}$Mn and $^{65}$Zn in single crystalline CoO have been measured by applying different radioactive isotopes simultaneously. To compare the residual activity method and the tracer sectioning method we analyzed our tracer diffusion experiments by using both methods simultaneously. According to our experimental results, the diffusion coefficients obtained from both methods are identical within experimental error, demonstrating the relibility of our experimental procedures. The diffusion coefficients of all the isotopes obtained during these test experiments for the methodology are similar in magnitude and show similar dependences on oxygen partial pressure. These first observations indicate that impurity diffusion of Mn and Zn occur via a vacancy mechanism as known for self diffusion of cobalt.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.749-754
• /
• 1998

This study describes a practical method for the measurement of sustained stress in concrete structures. In most cases, the sustained stress was determined by various theoretical calculation. However, the theoretical calculation can not always provide a sufficient information on the current stress state due to lots of uncertainty. Therefore, the present study proposes a practical in situ measuring method, Partial Sectioning Method

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1725-1730
• /
• 2014

Management of patients with stage II colorectal carcinomas remains challenging as 20 - 30% of them will develop recurrence. It is postulated that these patients may harbour nodal micrometastases which are imperceptible by routine histopathological evaluation. The aims of our study were to evaluate (1) the feasibility of multilevel sectioning method utilizing haematoxylin and eosin stain and immunohistochemistry technique with cytokeratin AE1/AE3, in detecting micrometastases in histologically-negative lymph nodes, and (2) correlation between nodal micrometastases with clinicopathological parameters. Sixty two stage I and II cases with a total of 635 lymph nodes were reviewed. Five-level haematoxylin and eosin staining and one-level cytokeratin AE1/AE3 immunostaining were performed on all lymph nodes retrieved. The findings were correlated with clinicopathological parameters. Two (3.2%) lymph nodes in two patients (one in each) were found to harbour micrometastases detected by both methods. With cytokeratin AE1/AE3, we successfully identified four (6.5%) patients with isolated tumour cells, but none through the multilevel sectioning method. Nodal micrometastases detected by both multilevel sectioning and immunohistochemistry methods were not associated with larger tumour size, higher depth of invasion, poorer tumour grade, disease recurrence or distant metastasis. We conclude that there is no difference between the two methods in detecting nodal micrometastases. Therefore it is opined that multilevel sectioning is a feasible and yet inexpensive method that may be incorporated into routine practice to detect nodal micrometastases in centres with limited resources.

• Horticultural Science & Technology
• /
• v.35 no.3
• /
• pp.373-380
• /
• 2017

Amaryllis ($Hippeastrum{\times}johnsonii$) is commonly propagated by three methods: seeds, offset bulblets, and twin scaling. Since the number and size of bulblets produced by these methods are low, we conducted an experiment to evaluate different bulb cutting methods for propagation. For this purpose, bulbs (circumference of 30 - 35 cm) were sectioned or notched into 8, 12, or 16 segments or twin-scaled into 48, 72, or 96 segments for bulblet formation. Our results show that the largest number of bulblets was produced by the twin scaling method, but they take longer to grow to a final, commercial size. Sectioning and notching resulted in larger, but fewer bulblets than twin-scaling. Compared to notching, sectioning provided more space for the bulblets to grow, and is therefore the recommended method. While increasing the number of sections cut from a single bulb resulted in a larger number of bulblets, the diameter of the bulblets decreased. Therefore, sectioning the bulb into 8 segments was the best method for producing an acceptable number of vigorous bulblets.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.35-38
• /
• 2005

The Restroom in house have a main role of bath, excretion, and washing hands. So there are usually bathtub, washbasin, and chamber pot. But the actions of bathing, excretion, and washing hands are not always occur at the same time. So the necessary of sectioning the restroom's space is introduced. In Japan they have some different methods in planning the restroom space. They separate the roles of bathroom and toilet, and develop several types of restroom. And they applicated the several types of restroom to appropriate spaces and floors. These sectioning the restroom's space make the moving line rational and take off the waste of spaces.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1218-1226
• /
• 1993

A method, so called 'successive cracking method,' for measuring residual stresses in a circular disk is proposed. In this method residual stresses are evaluated using a fracture mechanics approach, that is, the strains measured at a point on a edge of the disk as a crack is introduced and extended from the edge are used to deduce the residual stress distribution which existed in the uncracked disk. Through finite element analysis and comparative experiments with generally used sectioning method, the successive cracking method is shown to be valid, simple and effective to measure 2-dimensional residual stress distribution in a circular disk.

• Journal of Welding and Joining
• /
• v.21 no.3
• /
• pp.35-39
• /
• 2003

Laser welding has good characteristics such as high density energy, high speed and short heating time, as compared with conventional arc welding. The joint of laser welding also has good mechanical characteristics in general. However, relevant research is not sufficient to understand laser welding in the view point of mechanics until a recent date. In this paper, numerical simulation has been conducted to analyze distribution of welding residual stresses. Welding residual stresses of specimen have been measured by using sectioning method to compare the results between simulation and experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.697-705
• /
• 2014

This paper presents a vision based object width measurement method and its application where the light sectioning method is employed. The target object for measurement is a tread, which is the most outside component of an automobile tire. The entire system applying the measurement method consists of two processes, i.e. a calibration process and a detection process. The calibration process is to identify the relationships between a camera plane and a laser plane, and to estimate a camera lens distortion parameters. As the process requires a test pattern, namely a jig, which is elaborately manufactured. In the detection process, first of all, the region that a laser light illuminates is extracted by applying an adaptive thresholding technique where the distribution of the pixel brightness is considered to decide the optimal threshold. Then, a thinning algorithm is applied to the region so that the ends and the shoulders of a tread are detected. Finally, the tread width and the shoulder width are computed using the homography and the distortion coefficients obtained by the calibration process.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.3
• /
• pp.24-29
• /
• 2010

Axial fans for an air-conditioning unit are designed to equip the system with an expected flow-rate and low noise level by applying the blade design method of multi-sectioning and local camber generation. In this study, the distributions of chord length, stagger angle, and camber angle are globally and locally determined for the given specific speed, which is considered to be relatively high. The mock-up fans are observed to satisfy the aerodynamic performance and the noise level for the system simultaneously and discussed in terms of local flow patterns related to the emitted noise.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.701-706
• /
• 2006

This paper describes an attempt to develop a practical method for the measurement of dead load stress in existing concrete bridges. In most cases, the dead load stress was determined by various theoretical calculations. However, the theoretical calculation cannot always provide a sufficient information on the current stress state due to lots of uncertainty. The key idea incorporated with this paper is the partial sectioning method which is able to estimate current stress state in concrete bridges subjected to dead load. The proposed method is applied to the safety assessment of actual concrete bridges and the applicability of this system is investigated.