• 제목/요약/키워드: section of camera

검색결과 153건 처리시간 0.026초

하프늄카바이드 코팅을 통한 2종형상의 탄소/탄소복합재의 내삭마성 향상연구 (A Study on Improvement of the Ablation Resistance of Two Types of the Carbon/Carbon Composites by HfC Coating)

  • 강보람;김호석;오필용;최성만
    • Composites Research
    • /
    • 제33권4호
    • /
    • pp.205-212
    • /
    • 2020
  • 본 연구에서는 기상화학반응공정을 이용하여 실리콘카바이드가 코팅된 2종형상의 탄소/탄소복합재 위에 진공플라즈마용사를이용하여 하프늄카바이드를 코팅하였다. 코팅 전/후 시편을 5.06 MW/㎡의 열유속에서 120초 동안 산화 및 삭마 실험을 진행하였다. 시험 전/후의 질량 변화량을 통해 질량삭마율을 계산하였고 캘리퍼스와 고속카메라를 이용하여 길이변화를 측정하여 길이삭마량을 계산하였다. 시편 단면의 FE-SEM 및 EDS 분석을 통해 산화 및 삭마거동을 관찰하였다. 플라즈마 풍동 시험결과 코팅된 시편이 무게감소 및 길이변화가 적어 내산화 및 내삭마성이 높은 것으로 판단되었다. 그러나 동일조건에서 시험한 반구형과 원통형의 산화 및 삭마정도는 상이하였고 원통형에서 더 높은 내산화 및 내삭마성을 가지는 것으로 평가되었다.

오르막 퍼팅 동작 시 볼의 위치가 퍼터와 볼의 움직임에 미치는 영향 (Ball movements in various surface angles of uphill putting based on different ball positions)

  • 류종욱;김재정
    • 한국응용과학기술학회지
    • /
    • 제36권2호
    • /
    • pp.448-455
    • /
    • 2019
  • 본 연구는 오르막 퍼팅 시 좌, 우 경사에 따른 볼의 움직임이 어떻게 변화되는지에 대해 알아보는 것을 목적으로 한다. 본 연구를 위해 한국프로골프협회에서 15년 이상의 골프경기 경험이 있는 피험자들이 참여하였고, 본인들의 퍼터를 이용하여 실제 그린과 유사한 환경에서 퍼팅 동작을 수행하였다. 비디오 카메라를 이용하여 피험자들의 오르막 그린 경사에 따른 퍼팅 동작을 수집 후 동작분석을 실시하였으며, 통계적 유의수준을 a=.05로 설정하였다. 연구결과로 좌, 우 경사별 오르막 퍼팅에서 볼의 위치가 왼쪽에서 오른쪽으로 위치 할 때 볼 움직임의 속도와 각속도가 증가하는 것이 확인되었으며, 여러 경사도 중 성공률을 높여야 하는 오르막 퍼팅에서 경사에 따른 어드레스 볼 위치를 변화할 때, 임팩트 시 클럽 페이스와 볼 움직임이 어떻게 변화하는지를 검증하고, 현장적용 측면에 도움을 주는 과학적 자료를 제시하고자 본 연구를 진행하였다.

사이클링 스마트웨어 제작을 위한 빕 팬츠 디자인 및 패턴 개발 (Development of Bib Pants Design and Pattern for Cycling Smart Wear)

  • 김윤영;유병하;이우재;이기광;김리라
    • 패션비즈니스
    • /
    • 제26권5호
    • /
    • pp.91-104
    • /
    • 2022
  • In this study, a cycling smart wear for measuring cycling posture and motion was developed using a three-dimensional motion analysis camera and an IMU inertial sensor. Results were compared according to parts to derive the optimal smart device attachment location, enabling correct posture measurement and cycle motion analysis to design a pattern. Conclusions were as follows: 1) 'S-T8' > 'S-T10' > 'S-L4' was the most significant area for each lumbar spine using a 3D motion analysis system with representative posture change (90°, 60°, 30°) to derive incisions and size specifications; 2) the part with the smallest relative angle change among significant section reference points during pattern design was applied as a reference point for attaching a cycling smart device to secure detachable safety of the device. Optimal locations for attaching the cycling device were the "S-L4" hip bone (Sacrum) and lumbar spine No. 4 (Lumbar 4th); 3) the most suitable sensor attachment location for monitoring knee induction-abduction was the anatomical location of the rectus femoris; 4) a cycling smart wear pattern was developed without incision in the part where the sensor and electrode passed. The wearing was confirmed with 3D CLO. This study aims to provide basic research on exercise analysis smart wear, to expand the smart cycling area that could only be realized with smart devices and smart watches attached to current cycles, and to provide an opportunity to commercialize it as cycling smart wear.

끼어들기 단속시스템 개발 연구 (A Study on Development of Systems to Enforce the interfering Cars on the Ramp)

  • 이호원;현철승;주두환;정준하;이철기
    • 한국ITS학회 논문지
    • /
    • 제11권5호
    • /
    • pp.7-14
    • /
    • 2012
  • 끼어들기 행위에 대한 경찰의 인력단속이 매우 취약해 교통질서 위반자들의 현장단속이 어렵고 단속을 하더라도 위반증거를 확보하기가 어려워 단속이 거의 이루어지지 않고 있다. 램프 구간 진입 및 진출 지점에서 빈번하게 발생하는 끼어들기 위반을 무인단속장비를 이용하여 효율적으로 단속가능한지를 실험을 통해 평가를 하였다. 본 연구에서는 개별 영상 검지 방식의 한계점을 보완하기 위해 구간검지방식을 병행한 알고리즘을 제안하였다. 현장 실험 결과 다음과 같은 결론을 얻었다. 개별 영상검지 방식에 의해 끼어들기 위반을 단속한 결과 검지율이 58.2%인 반면 본 연구에서 제안한 방식의 검지율은 74.5%로 오검지율은 0.0%로 나타났다. 또한 단속범위를 넓게 하기 위해 기존 시설물을 이용할 수 있도록 장비를 소형화 및 경량화를 하고 별도의 제어기를 없애 카메라부에 제어기를 삽입한 일체형 카메라를 개발한 결과, 효율적으로 끼어들기 위반차량을 무인단속장비에 의해 단속이 충분히 가능할 것으로 판단된다.

Deep Learning Based Emergency Response Traffic Signal Control System

  • Jeong-In, Park
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권2호
    • /
    • pp.121-129
    • /
    • 2023
  • 이 논문에서 우리는 응급상황에 대응하여 일정 구간의 교통신호를 능동적으로 제어함으로써 재산과 인명 손실을 최소화할 수 있는 응급상황 대응 교통신호 제어 시스템을 개발하였다. 응급 차량 단말기에서 식별정보 및 GPS 정보를 포함한 응급신호를 송출하면 카메라에서 주위 영상을 획득하게 되고, 딥러닝 기반으로 객체를 분석하여 객체의 위치, 종류, 크기 등 정보를 가지는 객체정보를 출력한다. 이 객체를 트래킹한 정보를 생성하여 신호체계를 검출한 후 신호체계를 응급모드로 전환하여 수신받은 GPS 정보를 기준으로 응급 차량을 식별·추적하고 이 응급 차량의 진행 경로 기준으로 긴급 제어신호를 교통신호 제어기로 전송할 수 있는 체계이다. 이 시스템은 응급신호에 따라 우선 적용되는 긴급 제어신호에 의해 응급 차량의 진행이 저지되지 않도록 하여, 교통상 장애에 따른 인명과 재산의 손실을 최소화할 수 있다.

신 공여자에서 신장 깊이 측정에 따른 사구체여과율의 비교에 관한 고찰 (Study on Glomerular Filtration Rate comparison according to renal depth measurement of kidney donors)

  • 이한울;박민수;강천구;조석원;김주연;권오준;임한상;김재삼;박훈희
    • 핵의학기술
    • /
    • 제18권2호
    • /
    • pp.48-56
    • /
    • 2014
  • $^{99m}Tc$-DTPA 신장 신티그래피는 신공여자에게서 사구체 여과율을 평가하고, 신장 이식 가능여부를 결정하는데 있어 중요한 지표가 된다. 사구체 여과율을 측정하는데 이용되는 Gates법은 신장 깊이, 주사량, 순 신장 계수의 3가지 변수들을 고려해야 한다. 본 연구에서는 3가지 변수 중 신장 깊이 측정방법에 따른 신공여자의 사구체 여과율 변화를 비교 평가하고자 한다. 2013년 10월부터 2014년 3월까지 본원에 내원하여 복부 CT와 $^{99m}Tc$-DTPA 사구체 여과율 검사를 시행한 32명의 신공여자를 대상으로 하였다. CT에서의 횡단면 영상과 감마카메라에서 획득한 측면 영상으로 신장 깊이를 측정하고, 신장 깊이 산출 공식인 Tonnesen, Taylor, Itoh법과 비교하였다. GE사의 Xeleris Ver. 2.1220을 이용하여 신장 깊이에 따른 사구체 여과율을 산출한 후, 혈청 크레아티닌 수치를 이용한 MDRD(Modification of Diet Renal Disease) 사구체 여과율과 비교 분석하였다. CT와 감마카메라 영상에서 측정한 신장 깊이는 높은 상관관계를 보였다. 사구체 여과율은 Tonessen 공식을 적용하여 산출한 값이 최소치로 나타났고, CT 영상에서의 신장 깊이를 대입하여 산출한 값이 최대치로 나타났으며, 이를 적용한 사구체 여과율은 16.62%의 차이를 보였다. MDRD 사구체 여과율은 Taylor, Itoh, CT 및 감마카메라에서의 신장 깊이를 적용한 값에서는 통계적으로 유의한 차이를 보이지 않았으나 (p>0.05), Tonnesen 공식을 적용하여 산출한 값에서는 유의하게 나타났다(p < 0.05). CT 측정값을 대입하여 산출한 사구체 여과율 또한 MDRD, Taylor, Itoh, 감마카메라에서의 측정 깊이를 적용한 산출값과는 통계적으로 유의한 차이를 보이지 않았으나(p > 0.05), Tonnesen 공식을 적용하여 산출한 값에서는 유의하게 나타났다(p < 0.05). 본 연구에서는 신공여자에게서 $^{99m}Tc$-DTPA를 이용한 사구체 여과율 평가 시 Tonnesen 공식을 적용한 Gates법이 MDRD 사구체 여과율에 비하여 과소평가됨을 알 수 있었다. 따라서, MDRD 사구체 여과율과 검사 결과 산출된 값이 큰 차이를 보이는 경우 기존 Gates법에 적용되는 Tonnesen 방정식을 대신하여 Itoh 방정식을 적용 하거나 영상을 기반으로 측정한 신장 깊이를 적용하면 보다 정확한 사구체 여과율 평가가 가능할 것으로 사료된다.

  • PDF

THE INFRARED MEDIUM-DEEP SURVEY. V. A NEW SELECTION STRATEGY FOR QUASARS AT z > 5 BASED ON MEDIUM-BAND OBSERVATIONS WITH SQUEAN

  • JEON, YISEUL;IM, MYUNGSHIN;PAK, SOOJONG;HYUN, MINHEE;KIM, SANGHYUK;KIM, YONGJUNG;LEE, HYE-IN;PARK, WOOJIN
    • 천문학회지
    • /
    • 제49권1호
    • /
    • pp.25-35
    • /
    • 2016
  • Multiple color selection techniques are successful in identifying quasars from wide-field broadband imaging survey data. Among the quasars that have been discovered so far, however, there is a redshift gap at 5 ≲ z ≲ 5.7 due to the limitations of filter sets in previous studies. In this work, we present a new selection technique of high redshift quasars using a sequence of medium-band filters: nine filters with central wavelengths from 625 to 1025 nm and bandwidths of 50 nm. Photometry with these medium-bands traces the spectral energy distribution (SED) of a source, similar to spectroscopy with resolution R ~ 15. By conducting medium-band observations of high redshift quasars at 4.7 ≤ z ≤ 6.0 and brown dwarfs (the main contaminants in high redshift quasar selection) using the SED camera for QUasars in EArly uNiverse (SQUEAN) on the 2.1-m telescope at the McDonald Observatory, we show that these medium-band filters are superior to multi-color broad-band color section in separating high redshift quasars from brown dwarfs. In addition, we show that redshifts of high redshift quasars can be determined to an accuracy of Δz/(1 + z) = 0.002 - 0.026. The selection technique can be extended to z ~ 7, suggesting that the medium-band observation can be powerful in identifying quasars even at the re-ionization epoch.

근관치료 시 초음파 세정 기술을 이용한 잔사 제거의 효율성 (The efficacy of ultrasonic irrigation technique on debris removal during root canal treatment)

  • 김정현;김진우;조경모;박세희
    • 구강회복응용과학지
    • /
    • 제33권2호
    • /
    • pp.97-105
    • /
    • 2017
  • 목적: Passive irrigation (PI)과 Passive ultrasonic irrigation (PUI)의 상아질 잔사 제거 효율성을 비교하는 것이다. 연구 재료 및 방법: 16 mm 길이로 표준화된 하악 소구치 치근을 근관 확대 후 종단으로 이등분 하였다. 분리된 한쪽 상아질벽에는 길이 4 mm, 너비 0.2 mm, 깊이 0.5 mm의 표준화된 구를 형성하였고, 반대쪽에는 직경 0.3 mm, 깊이 0.5 mm인 3개의 반구 형태의 함요를 형성하였다. 각 구와 함요에는 NaOCl과 혼합된 상아질 잔사로 채우고, 퍼티 인상재를 사용하여 재조합하였다. Group 1은 PI를 이용하고 Group 2는 PUI를 이용하여 각 근관내를 세정하였다. 현미경과 디지털카메라로 절편의 근관벽을 촬영하고, 구와 함요에 잔존하는 상아질 잔사의 양을 scoring system을 이용하여 평가하였다. 결과: 근관의 중앙 1/3에서 group 1이 group 2에 비해 잔사를 더 많이 제거하였지만, 치근단부에서는 유의한 차이가 없었다. 결론: 하악 소구치에서 근관에 기구가 닿지 못하는 부위를 세정시, 근관의 중앙 1/3에서 PUI를 사용하는 것이 PI에 비해 상아질 잔사의 제거 효율이 우수했지만, 치근단부에서는 PUI와 PI의 유의한 차이가 없었다.

3차원 재구성법에 의한 C-shaped root의 형태분석 (MORPHOLOGIC ANALYSIS OF C-SHAPED ROOT USING 3-D RECONSTRUCTION)

  • 정은희;신동훈
    • Restorative Dentistry and Endodontics
    • /
    • 제27권4호
    • /
    • pp.421-431
    • /
    • 2002
  • C-shaped canal configuration is very difficult to treat because that clues about preoperative canal anatomy cannot be ascertained from clinical crown morphology and limited information can be derived from radiographic examination. This study was done to get more informations about the root and canal configuration of C-shape root by 3-dimensionally reconstructing for the purpose of enhancing success rate of endodontic treatment. 30 mandibular molars with C-shaped root were selected. Six photo images from occlusal, apical, mesial, distal, buccal, lingual directions and radiographic view were taken as preoperative ones to compare them with 3-D image. After crown reduction to the level of 1-2mm over pulpal floor was performed, teeth were stored in 5.25% sodium hypochlorite solution for the removal of pulp tissue and debris. They were cleaned under running water, allowed to bench dry and embedded in a self-curing resin. This resin block was serially ground with a microtome (Accutom-50, Struers, Denmark) and the image of each level was recorded by digital camera (FinePix S1-pro, Fuji Co., Japan). The thickness of each section was 0.25mm. Photographs of serial sections through all root canal were digitized using Adobe Photoshop 5.0 and then minimum thickness of open and closed sites were measured (open site is the surface containing occluso-apical groove closed site is oppsite). After dizitization using 3-D Doctor (Able software Corp, USA). 3D reconstruction of the outer surface of tooth and the inner surface of pulp space was made. Canal classsification of C-shaped roots was performed from this 3-D reconstructed image. The results were as follows : 1. Most C-shape rooted teeth showed lingual groove (28/30). 2 According to Vertuccis' calssification, type I, II, III, IV, VII were observed. but also new canal types suck as 2-3-2, 1-2-3-2. 2-3-2-1, 2-3-2-3 were shown. 3 There was little difference in minimum thickness on coronal and apical portions, but open site were thinner than closed site on mid portion. Conclusively, 3D reconstruction method could make the exact configurations of C-shape root possible to be visualized and analyzed from multi-directions. Data from minimum thickness recommend cleaning and shaping be more carefully done on dangerous mid portion.

스마트 웨어러블 지뢰탐지 장치 연구 (A Study on Apparatus of Smart Wearable for Mine Detection)

  • 김치욱;구경완;차재상
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권2호
    • /
    • pp.263-267
    • /
    • 2015
  • 현 지뢰탐지기는 탐지를 실시한 곳과 실시하지 않은 지역을 구분할 수 없고, 많은 인력과 시간이 낭비되는 문제점이 있으며, 사용자가 센서 헤드부를 일정한 속도로 움직이지 않거나, 너무 빨리 움직이는 경우 지뢰를 정확히 탐지하기가 곤란하다. 따라서 단방향 초음파 센싱신호를 통한 지뢰탐지 오류 문제점을 개선하고자, Human Body 안테나부, 메인마이크로프로세서 유닛부, 스마트 안경부, 바디장착형 LCD모니터부, 무선데이터 송수신부, 벨트형 전원공급부, 블랙박스형 카메라부, 보안통신 헤드셋으로 구성하여 전투복을 착용한 상태에서 신체의 머리, 몸통, 팔, 허리, 다리에 탈 부착식으로 장착, Superhigh Frequency RF Beam을 통해 지뢰를 탐지하는 Human Body 안테나부를 적용, 지뢰의 금속 비금속이 아닌, 지상(하)에 매설된 기폭제를 전방위($360^{\circ}$)로 탐지할 수 있고, 지뢰의 거리 위치 형태 재질을 2D 또는 3D 영상으로 스마트 안경 및 신체장착형 LCD모니터부에 실시간 표출시킬 수 있으며, 이로 인해 전투병이 지상(하)에 있는 지뢰를 회피, 신속하게 기동할 수 있다. 아울러 휴대용 배터리와 벨트형 전원공급부의 Twin-Self Supplements of electricity을 통해 별도의 충전 없이 3~7일간 전투를 수행할 수 있으며, 원격지의 전투상황을 원격지 전투지휘서버에서 실시간 모니터링할 수 있고, 전투병 1:1로 전투정보를 공유할 수 있어, 전투현장에 있는 것과 같은 생동감 있게 전투상황을 원격지휘할 수 있는 스마트전투시스템을 구축할 수 있는 Smart Wearable Minefield Detection System을 제안하고자 한다.