• Women's Health Nursing
• /
• v.7 no.2
• /
• pp.212-228
• /
• 2001

This is a cross-sectional descriptive correlation study that aimed to understand the relationship between the level of sexual contacts during the dates and psycho-social factors in teenage girls who have or had boyfriends. The purpose of this study was to describe the relationship between sexual contacts and self-esteem and self- assertiveness. The subjects of the study were 6,130 teenage girls who have or had boyfriends. They were selected convienently 12,733 teenage girls from 254 secondary schools located in 7 large cities and 9 provinces in Korea. A structured questionaire was used it included items one general characteristics, the levels of sexual contacts, self-esteem and self-assertiveness. Seven levels of sexual contacts were rated they were holding a hand, putting arms around each other's shoulders, kiss, french kiss, touching breast, petting genitalia, and sexual intercourse during the dates. Self-esteem and self-assertiveness were measured by the "Self-esteem scale" of Rogenberg (1971) and the questionaires developed by S. B. Chang et al(2000), respectively. The self-reported questionaires were collected from October 2, to October 28, 2000 and analyzed by using SPSS 10.0 Program. The data were analyzed by descriptive statistics, reliability, One-way ANOVA with Duncan method & Scheffe method. The results of the analysis were as follows. 1.An average Percentage of the respondents who have (46.1%) or had (53.9%) boyfriends was 48.1% (n=6,130) and the most common sexual contact during the dates was french kiss (26.7%, n=1,634). While 7.5%(458) of respondents had a sexual intercourse, 13.7%(842) of respondents didn't have any sexual contact during the dates. 2. Distribution of starting point of the first sexual contact demonstrates that 1,950 respondents (31.8%) held partner's hand at the first date and 1,367 respondents (22.3%) put arms around each other's shoulders at the 2nd or 3rd date. Sexual contacts such as kiss, french kiss, touching breast, petting genitalia, or sexual intercourse were experienced mostly at the later than the 10th date. However, surprisingly large number(1.7%) of respondents had genital contact and sexual intercourses at the first date. 3. The means of self-esteem and self-assertiveness socres of the respondents who have or had boyfriends are 27.43$({\pm}4.03)$ and 17.96$({\pm}2.55)$, respectively. The range of scores for self esteem was 10-40, 40 with most self esteem. The range of scores for self assertiveness was 7-21, 21 with most self assertiveness. 4. As sexual contacts proceeded, the means of self-esteem and self-assertiveness values decreased. In detail, the respondents having no or light sexual contacts (kiss, putting arms around each other's shoulder, holding a hand) had similar self-esteem values($p{\leq}0.05$). However, ones having relatively intensive sexual contacts (french kiss, touching breast) showed significantly lower self-esteem values($p{\leq}0.05$). Same trend has been obtained for self-assertiveness value. 5. The higher values of self-esteem and self-assertiveness values the respondents had, the later they started the moderate sexual contact (kiss, french kiss) during the dates. Interestingly, among the respondents having intensive sexual contacts (petting genitalia, sexual intercourse) during the dates, those who experienced the such contacts at the first date or later than 10th date have higher self-esteem and self-assertiveness values than one experienced the such contacts during the 2nd$\sim$9th dates, giving U-shape curve. 6. There was a significant relationship between self-esteem and self-assertiveness in girls who have or had boyfriends($P{\leq}.001$). In conclusion, the research shows that self-esteem and self-assertiveness values are significantly related with the sexual contacts of the teenage girls who have or had boyfriends. These results strongly suggest that proper sex education program for teenage girls should contain the program on improving the self-esteem and self-assertiveness. We believe that sex education program is the one of the best ways to prevent the unwanted sexual contacts and pregnancy of teenage girls.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.83-94
• /
• 2005

Host rock or the standing sculptured Buddha in the Yongamsa temple is macular porphyritic biotite granite, which has gone through mechanical and chemical weathering. The rock around the Buddha statue is busily scattered with steep inclinations that are almost vertically discontinuous planes with the strikes of $N8^{\circ}E$. Especially the development of the joints that cross the major joints causes the structural instability of the rock. The rock of the Buddha statue is separated into several rock blocks because of many different discontinuity. Thus it is estimated that the bed rock has not only plane and toppling failure but also wedge failure in all the sides. Since the differential pressure is imposed on the body of the Buddha in the host rock, it is urgent to give a reinforce treatment of geotechnical engineering for the safe of its structural stability. Very contact area of joints have turned into soil, which promotes the growth of weeds and plant roots, then aggravates the mechanical weathering of the rock. Thus conservational treatments should also be considered to get rid of secondary contaminants and vegetation along the discontinuities and to prevent further damages.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.136-141
• /
• 2016

In the present study, the distribution of glass particles inside 10 patrol cars of Chungnam Province has been studied. The target seats were front seats (driver’s seat, passenger’s seat) and the back seat. The target areas were the bottom of the seat (seat contacting buttocks, back of the seat, and the corner of the seat (the bottom and back attached part)). The target areas were tape lifted with an adhesive tape. The glass particles adhering to the adhesive tape were examined and counted under a stereomicroscope. The total number of glass particles found was 679. Among them, 471 (driver’s seat 293, passenger seat 178) were collected from front seats, which are usually occupied by police officers. The majority of glass particles were under 0.49 mm size. The results show that the majority of glass particles can be found on the front seats, rather than on the back seat. There is a high probability that glass particles found on the front seat adhere to police officers, so that to get further transferred to the convict upon physical contact (secondary transfer). Thus, there is a risk of misinterpretation of the value of glass evidence in the course of forensic examinations. Hence, a separate method to prevent cross contamination has to be prepared by police authorities as soon as possible.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.727-735
• /
• 2007

The use of water by cities is increasing owing to industrialization, the concentration of population, and the enhancement of the standard of living. Accordingly, the amount of waste water is also increasing, and the degree of pollution of the water system is rising. In order to solve this problem, it is necessary to remove organisms and suspended particles as well as the products of eutrophication such as nitrates and phosphates. This study developed a high-end treatment engineering solution with maximum efficiency and lower costs by researching and developing a advanced treatment engineering solution with the use of Biosorption. As a result, the study conducted a test with a $50m^3/day$ Pilot Scale Plant by developing treatment engineering so that only the secondary treatment satisfies the standard of water quality and which provided optimal treatment efficiency along with convenient maintenance and management. The removal of organisms, which has to be pursued first for realizing nitrification during the test period, was made in such a way that there would be no oxidation by microorganisms in the reactor while preparing oxygen as an inhibitor for the growth of microorganism in the course of moving toward the primary settling pond. The study introduced microorganisms in the endogeneous respiration stage to perform adhesion, absorption, and filtering by bringing them into contact with the inflowing water with the use of a sludge returning from the secondary settling pond. Also a test was conducted to determine how effective the microorganisms are as an inner source of carbon. The HRT(Hydraulic Retention Time) in the nitrification tank (aerobic tank) could be reduced to two hours or below, and the stable treatment efficiency of the process using the organisms absorbed in the NAR reactor as a source of carbon could be proven. Also, given that the anaerobic condition of the pre-treatment tank becomes basic in the area of phosphate discharge, it was found that there was excellent efficiency for the removal of phosphate when the pre-treatment tank induced the discharge of phosphate and the polishing reactor induced the uptake of phosphate. The removal efficiency was shown to be about 94.4% for $BOD_5$. 90.7% for $COD_{Cr}$ 84.3% for $COD_{Mn}$, 96.0% for SS, 77.3% for TN, and 96.0% for TP.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.203-211
• /
• 2015

Purpose: The purpose of this study was to investigate the reosseointegration periods when the rough surface implants, which had complete bone-implant ankylosis, suddenly losed the osseointegration. Materials and Methods: The implants with RBM surface treatment were inserted into both tibias of 23 rabbits. Two implants were submerged into each side. After six weeks, the primary removal torque was measured by Digital torque gauge, and then the implants were replaced and submerged to estimate the level of reosseointegration. After assigned healing periods for each group, the removal torque was measured again. BIC (Bone-Implant contact, %) ratio was measured through histomorphometric analysis.Paired t-test was processed by SPSS 14.0. One-way ANOVA and Tukey's post-hoc test was processed to analyze statistically significant differences among the groups. Results: In comparison with the primary removal torque, the secondary removal torque was increased after 11 days and significantly increased from 2 weeks. In fluorochrome labeling, the origin of mineralization was observed after 7 days, which showed as fluorescent bands around the bone-implant interfaces. After 11 days, the bone formation was apparent, and it is increased continuously with the passage of the time. Conclusion: In 11 days after the implant replacement, the secondary removal torque was almost as same as the primary value, and was significantly higher from 2 weeks. The mineralized shapes were observed in 7 days after the implant replacement, and then the bone formation appeared visibly in 11 days.

• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.2
• /
• pp.173-183
• /
• 2016

Fungi are a major cause of cultural and biological degradation in museum storages and archives libraries. In addition, fungi produce toxins and can cause skin allergies. In particular, fungi coming into contact with the skin through the hands of administrators dealing with cultural properties, archives, and books can lead to secondary infections. To prevent this, applying hand sanitizer, which is readily available in the market, is recommended. However, such hand sanitizer can effectively disinfect against bacteria but not fungi. As such, researching for an alternative is required. In this study, we developed a hand sanitizer composed of active ingredients - geranial, cineol, menthol, and Chamaecyparis obtusa - and performed a disinfection test, which targets 10 kinds of species (Alternaria citrimacularis, Alternaria consortialis, Aspergillus niger, Aspergillus versicolor, Cladosporium sphaerospermum, Coniothyrium aleurites, Penicillium brevicompactum, Penicillium corylophilum, Penicillium paneum, and Penicillium polonicum), of fungi investigated in museums and libraries. It was then confirmed to exhibit excellent disinfecting effects. Thus, this hand sanitizer is expected to prevent skin diseases and secondary infections in administrators dealing with cultural properties, archives, and books.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.566-572
• /
• 2020

In a wireless power transmitter, the characteristics and effects of wireless power transmission between two induction coils are investigated, and a power converter circuit and a battery charger/discharger circuit using wireless power transmission technology are proposed. The advantage of wireless power transmitters and wireless chargers is that, instead of the existing plug-in-mounted wired charger (OBC; on-board charger), the user can wirelessly charge the battery without connecting the power source when charging power to the battery. There is. In addition, the advantage of wireless charging can bring about an energy efficiency improvement effect by using the secondary side rectifier circuit and the receiving coil, but the large-capacity long-distance wireless charging method has a limitation on the transmission distance, so many studies are currently being conducted. The purpose of the study is to study the transmitter circuit and receiver circuit of a wireless power transmission device using a primary coil, a secondary coil, and a half bridge series resonance converter, which can transmit power of a non-contact type power transmitter. As a result, a new topology was applied to improve the power transmission distance of the wireless charging system, and through an experiment according to each distance, the maximum efficiency (95.8%) was confirmed at an output of 3 kW at an 8 cm transmission distance.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.219-229
• /
• 2022

Bentonite is being considered as a candidate for buffer material in geological disposal systems for high-level radioactive wastes. In this study, the effect of cement-bentonite interactions on bentonite alteration was investigated by reviewing the literature on studies of cement-bentonite interactions. The major bentonite alteration by hyperalkaline fluids produced by the interaction of cementitious materials with groundwater includes cation exchange, montmorillonite dissolution, secondary mineral precipitation, and illitization. When the hyperalkaline leachate from the reaction of the cementitious material with the groundwater comes into contact with bentonite, montmorillonite, the main component of bentonite, is dissolved and a small amount of secondary minerals such as zeolite, calcium silicate hydrate, and calcite is produced. When montmorillonite is continuously dissolved, the physicochemical properties of bentonite may change, which may ultimately causes changes in bentonite performance as a buffer material such as adsorption capacity, swelling capacity, and hydraulic conductivity. In addition, the bentonite alteration is affected by various factors such as temperature, reaction period, pressure, composition of pore water, bentonite constituent minerals, chemical composition of montmorillonite, and types of interlayer cations. This study can be used as basic information for the long-term stability verification study of the buffer material in the geological disposal system for high-level radioactive wastes.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.