• 전자공학회논문지CI
• /
• 제49권1호
• /
• pp.23-28
• /
• 2012

주 기억 장치인 메모리의 전송 속도와 프로세서의 처리 성능 향상에 비해 보조 기억 장치의 속도 향상은 매우 느리다. 응용프로그램의 실행을 위해서는 보조 저장 장치에서 메모리로의 적재 과정을 거쳐야 하며 이 구간에서 병목현상이 발생한다. 본 논문은 응용 프로그램의 초기 적재 시간의 감소를 위하여 실행 가능한 압축 기법을 구현하고 이의 성능 향상 정도를 실험하였다. 이를 위해서 퍼스널 컴퓨터 상에서 실행하는 실행 바이너리 파일 압축기와 임베디드 환경에서 실행되는 압축 해제기를 각각 구현하였다. 파일의 크기가 다른 6개의 테스트 바이너리 파일을 이용하여 실험한 결과 파일의 크기가 작아 성능이 감소한 경우를 제외하고 평균 약 29%의 프로그램 초기 실행 시간이 감소되었다. 각 파일의 특성에 따라 압축률이 다르고 성능 향상 정도가 다르기 때문에 해당 파일의 특성에 최적화된 압축 알고리즘의 적용이 필요할 것으로 보인다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.173-180
• /
• 2002

The specimens with three discontinuities have been tested in uniaxial compression. The geometry of discontinuities is changed by three different parameters: flaw inclination angle, continuity, and spacing. From the tips of the discontinuities wing and secondary cracks are observed. Wing cracks initially propagate curvilinear direction and follow loading direction after some distance from the tip of the discontinuities. Two different types of secondary cracks have been observed from the study: quasi-coplanar secondary cracks and oblique secondary cracks. From the test nine different types of coalescence are observed and they show a correlation with flaw angle and ligament angle. It is attempted to simulate the observed results by using FROCK(Fractured ROCK). FROCK is a code based on the hybridized DDM(Displacement Discontinuities Method) . It is shown that FROCK has quite potential of modeling of rock fracture processes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.97-110
• /
• 1997

• 한국농공학회지
• /
• 제45권5호
• /
• pp.133-139
• /
• 2003

Dredged soil from sea has much higher water content than liquid limit of clay and even if small loads apply, it will suffer a great settlement. Therefore it is very difficult to perform a consolidation test with general consolidation apparatus because of high water content. In this study Rowe Cell Apparatus consolidation tests have been performed with 1 remolding clay of water content 56% and 4 slurry clays of a water content of 100%, 120%, 133% and 150%. From the test results the consolidation characteristics such as compression index, secondary compression index and consolidation coefficient have been investigated with a variation of water content of dredged soil. The equations to get consolidation constants such as a compression index, a consolidation coefficient have been proposed with the field water content.

• Journal of Chest Surgery
• /
• 제35권11호
• /
• pp.839-841
• /
• 2002

일반적으로 척추기형에 의한 기계적인 기도협착 환자의 경우 척추기형을 교정함으로써 증상을 완화시킬 수 있다. 그러나 흉곽기형의 원인이 되는 척추기형이 너무 심하여 교정이 어려울 경우에는 심한 기도협착으로 인해 호흡부전을 유발하고 치명적인 결과를 초래할 수 있다. 본 교실에서는 교정이 불가능할 정도의 심한 척추기형으로 인한 기도협착 환자에서 흉벽거상술을 통해 비교적 좋은 성적을 얻었기에 이에 문헌고찰과 함께 보고하고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.1-13
• /
• 2001

Compression, lateral, and opposite woods in the stem and branch of rimu (Dacrydium cupressinum Lamb.), a softwood species indigenous to New Zealand, were described and compared in the anatomical aspects. Qualitatively, growth rings were wide in the compression wood, intermediate in the lateral wood, and narrow in the opposite wood. Tracheid transition from early wood to late wood was very gradual in the compression wood but was more abrupt in both the lateral and opposite woods. When viewed transversely, compression wood tracheids showed a roundish outline except at the growth ring boundary but lateral and opposite wood tracheids were angular to rectangular in outline. Intercellular spaces were occasionally detected in the compression wood except in the late wood at the growth ring boundary but were absent from both the lateral and opposite woods. Slit-like extensions of the bordered pit openings caused by the location of pit apertures within short and narrow helical grooves were observed in the compression wood tracheids but not in the opposite or lateral wood tracheids. In the compression wood tracheids, fine striations in the form of fine checks or grooves were observed on the lumen surfaces and the innermost $S_3$ layer of secondary wall was absent. In the tracheids of lateral and opposite woods, the $S_3$ layer was sometimes absent but occasionally highly developed. Cross-field pits in the compression wood appeared to be piceoid due to slit-like pit apertures but those in the lateral and opposite wood tracheids showed cupressoid to taxodioid. Quantitatively, compression wood tracheids were somewhat shorter than those of opposite or lateral wood in stem but not different from the opposite or lateral wood tracheids in branch. The walls were thicker in the compression wood than in the lateral or opposite wood. Uniseriate rays in the compression wood were fewer than in the lateral or opposite wood.

• Advances in Energy Research
• /
• 제7권1호
• /
• pp.1-19
• /
• 2020

Energy consumption of air-conditioning and refrigeration systems is responsible for about 25 to 30% of the energy demand especially in hot seasons. This equipment is mostly electricity dependent and their use in principle affects negatively the environment. Enhancing the energy efficiency of the existing equipment is important as one of the measures to reduce environment impacts. This paper reports the results of an experimental study to evaluate the impacts of the use electronic expansion valve and variable velocity compressor on the performance of vapor compression refrigeration system. The experimental rig is composed of two independent circuits one for the vapor compression system and the other is the secondary fluid system. The vapor compression system is composed of a forced air condenser unit, evaporator, hermetic compressor and expansion elements, while the secondary system has a pump for circulating the secondary fluid, and an air conditioning heat exchanger. The manufacturer's data was used to determine the optimal points of operation of the system and consequently tests were done to evaluate the influence of variation of the compressor velocity and the opening of the expansion device on the performance of the refrigeration system. A fuzzy logic model was developed to control the rotational velocity of the compressor and the thermal load. Fuzzy control model was made in LabVIEW software with the objective of improving the system performance, stability and energy saving. The results showed that the use of fuzzy logic as a form of control strategy resulted in a better energy efficiency.

• 한국정보전자통신기술학회논문지
• /
• 제8권6호
• /
• pp.460-469
• /
• 2015

본 연구는 IoT 기술을 이용한 의료기기에서 송수신되는 대량의 이진데이터의 디지털 변조 과정시 독특한 압축 알고리즘을 적용하여 보다 빠른 시간내에 데이터를 송수신하기 위한 연구이다. 이를 위해 이진데이터 스트리밍을 간단한 규칙에 따라 바이너리 클러스터라는 단위로 구분한 뒤, 각 바이너리 클러스터에 대해 1차 압축바이너리 클러스터를 생성하고 유형별로 추가적인 압축 연산을 통해 1 내지 2비트를 압축한 2차 압축 바이너리 클러스터를 생성한 뒤, 각각의 2차 압축 바이너리 클러스터를 맨체스터 라인코딩 방식으로 전송하였다. 특히 본 연구에서는 각각의 2차 압축바이너리 클러스터들의 구분을 위한 정보로서 휴지 전위를 2차 압축 바이너리 클러스터를 코딩한 맨체스터 코드 사이에 삽입 전송하는 방법을 제안하였다. 이를 통해, 2비트 압축된 바이너리 클러스터의 경우 휴지 전위를 위한 1 전송 단위 시간의 소요를 고려하더라도 추가적으로 1 전송 단위 시간의 시간적 이득을 얻게 됨으로써 전송 속도를 향상시킬 수 있을 것으로 기대되었다. 휴지 전위는 1개 전송 단위로서만 독립적으로 각각 분리된 압축바이너리 클러스터들의 연결에 사용하므로, 2개 전송단위 시간 이상의 연속된 휴지 전위는 존재하지 않게 되고, 맨체스터 코딩의 기본 규칙을 준수하므로 직류 성분도 존재하지 않게 된다. 특히 이미 정보이론 알고리즘을 이용한 압축된 이진 데이터에 대해서도 본 연구에서 제안한 압축전송 과정을 이용할 경우 전송 속도를 추가적으로 약 12.6% 향상 시킬 수 있음이 예측되었다.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.249-257
• /
• 1999

A three dimensional finite model of a human neck has been developed in an effort to study the mechanics of cervical spin while subjected to vertical impact. This model consisting of the vertebrae from C1 through C7 including posterior element and ligaments was constructed by 2mm thick transverse CT cross-sections and X-ray film taken at lateral side. Geometrical nonlinearity was also considered for the large deformation on the disc. ABAQUS package was used for calculation and its results were verified comparing with responses of a model under static loading condition with published in-vitro experimental data. There were more cervical fracture in the restrained (compression) mode than in the nonrestrained (flexion-compression and extension-compression) mode. Upper cervical(C1-C2) injuries were observed under compression-extension modes, while lower cervical injuries occurred undjer compression-flexion modes. Posterior ligament distraction without bony damage at the upper cervical spin(C1-C2) were observed secondary to C5-C7 trauma in compression-flexion modes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.37-41
• /
• 2002

Lap splice is used in building construction up to recently. As buildings become higher and larger, the use of high tensile bar is increasing due to increasing in the use of high compression concrete. However the using of high tensile bar in lap splice causes eccentricity and difficulty in placing of concrete inside the form, therefore not allowing enough intervening material. Various mechanical connection are being developed but the coupler of today needs either a secondary intervening material or secondary processing that consumes much time. Therefore a coupler, needing neither a secondary intervening material nor secondary processing, was made in this study which lead to following results. (1) Breaking occurred in all experimented rebar. (2) Acquirement of tension exceeding the standard requirement. (3) Acquirement of elongation percentage within the standard requirement.