• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.842-845
• /
• 2004

When the concrete structures are in contact with seawater, concentration of chloride for estimating chloride diffusion coefficient can be defined as the chloride concentration of sea water. However, in case the concrete structures, constructed in the seashore, aren't directly in contact with seawater, it is difficult to establish the interface concentration of chloride. In addition, marine concrete structures are greatly affected by salt attack such as rebar corrosion, among the cause of salt attack, airborne sea salt is primary factor. Therefore, in this study, salt attack environment by airborne sea salt was investigated in terms of the distance from seashore at 33 spots, 6 areas in East, West, South coast for 1 year. Results indicated that airborne sea salt is decreased by $y=a{\cdot}x^{-b}$ equation to the distance from seashore.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.237-240
• /
• 2004

When the concrete structures are in contact with seawater, concentration of chloride for estimating chloride diffusion coefficient can be defined as the chloride concentration of sea water. However, in case the concrete structures, constructed in the seashore, aren't directly in contact with seawater, it is difficult to establish the interface concentration of chloride. In addition, marine concrete structures are greatly affected by salt attack such as rebar corrosion, among the cause of salt attack, airborne sea salt is primary factor. Therefore, in this study, salt attack environment by airborne sea salt was investigated in terms of a seasonal distribution at 33 spots, 6 areas in the East, West, South coast for 1 year. Results indicated that in the South coast, the amount of the airborne sea salt is comparatively higher in summer. in the West coast. higher in winter. On the other hand, in the East coast, the amount of the airborne sea salt is rarely affected by a season.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.705-714
• /
• 2010

The residual oil concentrations in seawater and sediments were investigated along the Taean coast of Korea, following the Hebei Spirit oil spill, which occurred on 7 December 2007. The oil concentration in seawater ranged from 0.059 to $0.866\;{\mu}g/L$ for the tidal flat culture grounds and from 0.016 to $0.943\;{\mu}g/L$ in the fish cage areas in 2008. These were dominated by the seawater temperature relationship. Polycyclic aromatic hydrocarbons (PAHs) in sediments were also analyzed and the concentrations ranged from 3.4 to 509.7 ng/g dry weight. The average PAH level was higher in seawater from the Sinduri area than the Padori area, while the average PAH level in sediments was higher in Padori. The diagnostic ratio of PAHs was investigated to determine the origins of the PAHs. The PAHs in the Seongam area, which was not affected by the oil spill, are of pyrolytic origin, while the PAHs in Padori and Sinduri were of petrogenic origin. The residual oils in the areas affected by the oil spill tended to decrease over time, except in summer. The oils in pore water remained 6- to 16-fold higher, as compared to the seawater overlying the tidal flat, implying that residual oils will continue to influence the affected region for the foreseeable future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.211-224
• /
• 2006

It was analysed that spatial and temporal change patterns of COD, TN and TP were measured monthly from 2002 to 2005 in Jumunjin Harbour. Cenerally, concentration of upper layer higher than lower layer, concentration difference of COD, TN and TP on upper lower layer at inner zone in Jumunjin Harbour higher than sea area front of breakwater. Seasonal change width of COD concentration different, but seasonal change pattern of COD, $NH_{4}-N$ and TN clearly showed. Water quality improvement effect of seawater exchange facilities and sewage treatment plants is analysed quantitatively using averaged spatial and temporal data set. Change of COD small at 2003, concentration reduced about $34{\sim}47%$ at all zones on 2004 and 2005. TN was influenced largely effect of seawater exchange facilities. Concentration reduction at zone 1, 2, 3 estimated about $60{\sim}70%,\;40{\sim}60%,\;40%$, respectively. As a consequence, concentration reduction of COD and TN that is, effect of water quality improvement influenced seawater exchange facilities appeared not only at inner zone, also sea area front of breakwater and entrance of Jumunjin Harbour.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.331-332
• /
• 2019

• Analytical Science and Technology
• /
• v.33 no.4
• /
• pp.186-196
• /
• 2020

A simple and rapid preconcentration method of actinide from seawater using Actinide resin was developed and tested with the seawater spiked with a known U and Th. The developed method of Actinide resin based on column chromatography is less time-consuming and requires less labor compared with a typical co-precipitation technique for preconcentration of actinides. U and Th, which are relatively weak-bonded with Actinide resin among actinides, were used to determine the optimum flow rate of seawater sample and evaluate the capacity of Actinide resin to concentrate actinides from seawater. A flow rate of 50 mL min^-1 was available with Actinide resin 2 mL (BV, bed volume). When 5 or 10 L of seawater containing U were loaded on Actinide resin (2 mL, BV) at 50 mL min^-1, the recovery of U was 93 % and 86 %, respectively. For extraction of actinides bound with Actinide resin, we compared three methods: solvent extraction, ashing-acid digestion, and ashing-microwave digestion. Ashing-microwave digestion method shows the best performance of which is the recovery of 100 % for U and 81 % for Th. For the preconcentration of actinides in 200 L of seawater, a typical coprecipitation method requires 2-3 days, but the developed method in this study is achieved the high recovery of actinides within 12 h.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.6
• /
• pp.811-823
• /
• 2009

Seawater desalination process using a reverse osmosis (RO) membrane has been considered as one of the most promising technologies in solving the water scarcity problems in many arid regions around the world. To protect RO membrane in the process, a thorough understanding of the pretreatment process is particularly needed. Seawater organic matters (SWOMs) may form a gel layer on the membrane surface, which will increase a concentration polarization. As the SWOMs can be utilized as a substrate, membrane biofouling will be progressed on the RO membrane surface, resulting in the flux decline and increase of trans-membrane pressure drop and salt passage. In the middle of disinfection, an optimal chlorine dosage and neutralizer (sodium bisulfite, SBS) should be practiced to prevent oxidizing the surface of RO membranes. Additional fundamental research including novel non-susceptible biofouling membranes would be necessary to provide a guide line for the proper pretreatment process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1895-1899
• /
• 2006

Seawater intrusion phenomenons of coastal area happen by natural or artificial factor. For example, density difference of seawater and fresh water, surface of the water change by tidal current, pumping, aggregate picking from mouth of a river, large scale reclamation in water area business etc. This research analyzed effect that groundwater TDS changed by pumping.As a result, it was expose that TDS density increases by sudden inflow of seawater when do pumping up more than $200m^3/day$. Finally, We are expected to prevent calamity by seawater intrusion in coastal area through this study and propose optimum pumping amount to use groundwater safety.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.21-27
• /
• 2013

The present study explored the way to desalinate seawater for agricultural irrigation using forward osmosis (FO) process using liquid fertilizer as draw solution. FO experiments were performed in a cross flow mode using flat sheet FO membrane. The effect of membrane orientation, flow rate, and draw solution concentration on the performance of forward osmosis was investigated by measuring water flux of forward osmosis membrane. The water flux when the draw solution was placed against the membrane active layer was lower than the water flux when the feed solution was placed against the membrane active layer. This results indicated that the decrease of effective osmotic pressure by dilutive internal concentration polarization was less than that by concentrative internal concentration polarization. Increasing flow rate from 66.7 to 133.1 $cm^3$/min resulted in increase of the water flux when the membrane active layer orient to draw solution and feed solution, respectively. The reduction of resistance to water flow increased water flux at higher flow rate. The water flux of FO membrane increased with increasing draw solution concentration from 10000 to 30000 mg/L. The water flux for $KH_2PO_4$ draw solution was similar to that for commercial fertilizer. Optimization of FO process would contribute to economically desalinate brackish water for agricultural use.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2009

The metals such as Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn, etc are present at very low concentration in seawater and are classified as so-called trace metals. Whiles some of them are used in metabolism of living organism as a micronutrient, they may show toxic effects on organisms in case of a limited threshold concentration of them Plenty of studies on trace metals have been performed bemuse trace metals have a persistent influence and an adverse effect on marine environment and ecosystem. For long years, when the concentration of trace metals in natural waters such as seawater and fresh water are measured with high precision and accuracy, some systematic errors have been recognized to be present in measurements. Since 1975 in US and European countries, the measured concentration of trace metals in seawater have been found to be lower by factors of 10-1,000 than the previous data of trace metals measurements and the vertical profiles of the measurements have been shown to reflect well-known biological, physical and geochemical processes. These results are attributed to great advances in analytical instrumentation and methodology for trace metals measurements. Precautions against the contamination of samples are required to be taken in the process of sampling, storage, and analysis of samples. However, in Korea, erroneous data of trace metals with regard to ocean and marine environment related survey and investigations are reported The lock of exact understanding and information regarding precautions in sampling, storage and analysis of samples lead to the deterioration of data quality, especially in the analysis of trace metals. The major procedures to obtain the accurate data of trace metals in natural waters are introduced for applying to the study and assessment of marine environments.