• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.465-475
• /
• 2010

For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.

• The Research Journal of the Costume Culture
• /
• v.13 no.2 s.55
• /
• pp.189-199
• /
• 2005

The purposes of this study are to see a manufacturing process on knit by comparison, and to present whole garment knitting machine different from the traditional method of the production by using the whole garment system. The characteristics of each stage were examined through SDS-one, Shimaseiki Design CAD System and the whole garment knitting machine. The whole garment knitting machine as a method of composing a suit of knitting product is a way of making creative knitting fashion, which also can be used as a basic material for the further study on the whole garment knitting machine. Eventually, it is expected that this machine can satisfy the knit wearers' various needs by showing more useful method to knit designers.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.113-125
• /
• 2012

This study, as one on the neck design of seamless knitwears, set out to make experimental clothes applying various knitting methods to the hem of round neck, seek the knitting methods of finishing touches on the ending part of round neck to enhance function and aesthetic appreciation through measuring tensile strength and assessing wearing sensation, and provide basic data that would be of practical help to developing the design of seamless knitwears and mass production in the national knit industry. The ending part of neck of the seamless knitwear is not only the last stage in making knitwear but also affects the function and appearance of the clothes. The investigator, thus made six different pieces of experimental clothes according to the finishing methods of knitting on the neck, then measured tensile strength and put them to the test by a group of experts for the assessment of wearing sensation. The results were analyzed based on variance analysis(ANOVA), and the items with similar results were put to the Duncan test for intergroup comparison. According to the analysis results of measuring tensile strength, Experimental Clothes B received the highest evaluation, Experimental Clothes E the lowest. Also Experimental Clothes B was ranked the highest in almost every evaluation criteria, whereas Experimental Clothes E was ranked the lowest in the assessment of wearing sensation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.69-79
• /
• 2019

This study aims to seek knitting methods that can enhance the neck design of seamless knitwear and to find out how to improve the designs by comparing and analyzing the characteristics of the knitting methods used for v-neck pullovers. The investigator analyzed the characteristics of the knitting methods and assessed the wearing sensation by using six different pieces of clothing for the experiment. The results were analyzed based on a variance analysis (ANOVA). Among the items showing significant results, the Duncan-test was used for more intensive research. As a result, while using the basic pattern of knitting methods, Experiment Clothes A ended up binding on the back neckline, and not making the hem of back. Also, the neck was the widest. In the case of the special neck, Experimental Clothes B (1:1), which had the least number of the knitting course in relation to the knitting ratio, the bottom part of the back body had the most wrinkles. According to the result of wearing sensation, the front part, the side part, and the back part showed similar results (p<0.000) in all items. Specifically, the appearance of the Experiment Clothes A (normal) in both the front and rear aspects were evaluated as the best. In the case of the special neck, the Experimental Clothes F was ranked the highest, whereas the Experimental Clothes B (1:1) was ranked the lowest. Based on the results of the study, it seems possible to provide concrete and technical data for the planning of unique and productive designs. With regard to seamless knitwear neck designs, a comparative analysis of the knitting method of v-neck pullovers will be of practical use in the development and manufacturing of the product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.745-750
• /
• 2008

In a cognitive radio based system, quality of service (QoS) for the secondary user must be maintained as much as possible even while that of the primary user is protected all he time. In particular, switching wireless links for the secondary user during the transmission of multimedia data causes delay and information loss, and QoS degradations occur inevitably. The efficient resource management scheme is necessary to support the seamless multimedia service to the secondary user. This paper proposes a novel frequency selection method based on Multi-Criteria Decision Making (MCDM), in which uncertain parameters such as received signal strength, cell load, data rate, and available bandwidth are considered during the decision process for the frequency selection with the fuzzy set theory. Through simulation, we show that our proposed frequency selection method provides a better performance than the conventional methods which consider the received signal strength only.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2004-2010
• /
• 2009

The characteristic of the backbond for distribution service in WMNs(Wireless Mesh Networks) is that WMNs has multiple links connected to mesh points and dynamic routing protocol such as AODV to establish routing paths. When the terminal is communicating with the service through new AP, mobile nodes can resume communication by setting only the link between new AP and mobile node in the case of existing WLANs, but WMNs needs path establishment process in multihop networks. Our goal in this paper is to support the seamless communication service by eliminating path establishment delay in WMNs. We present the method that eliminates the handover latency by predicting the location of handover using GPS information and making the paths to their destination in advance. We implement mesh nodes using embedded board that contains proposed handover method and evaluate performance of handover latency. Our experiment shows that handover delay time is decreased from 2.47 to 0.05 seconds and data loss rate is decreased from 20~35% in the existing method to 0~10% level.

• Fire Science and Engineering
• /
• v.21 no.1 s.65
• /
• pp.98-105
• /
• 2007

On this study, we verified the possibilities of making T-branch pipe forming with carbon steel pipes and stainless steel pipes used by common FEM Program(ABAQUS) which are widely used in the fire protection and building construction fields. In this kind of T-branch pipe forming works, in principle, the seamless pipe is used. If the pipe has the seam, the forming face must be the opposite side of the seam. The forming works are carried out by a truncated cone shaped plug. We found that the face slope and the length of plug are the most important factor in pipe forming. Based on the results of forming analyses, we proposed the minimum height and thickness of pipe branch forming.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.2
• /
• pp.21-29
• /
• 2017

Recently, with having a great interest of the general public for the AR (Augmented Reality) technology, there have been lots of study to improve efficiency of a construction equipment with applying the AR technology to a construction equipment. The clear extrinsic calibration is essential to applying AR technology at the construction site without any error which came from superimposition between 'Real world' and 'Virtual world'. However, on the construction site, the clear extrinsic calibration is not possible, because of lack of time and budget for the specific survey, also, the huge error of the outdoor tracking system such as gyro, GPS system and so on. In this study, we do research about seamless superposition with unclear extrinsic calibration and the image process method for making AR navigator operating in the excavator. Based on this study, we figure that we can fully develop the AR navigator for the excavator. Furthermore, thereby operating AR navigator at many construction sites, we expect that the efficiency of the excavator will be improved. In addition, we can develop AR navigator for not only a excavator but all about construction equipment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.28-36
• /
• 2016

ID federation provides users various benefits such as employing multiple services with only single authentication and mitigating management burden of service providers that individually preserve account information of users. To keep up with this international trend, efforts for making the domestic ID federation is ongoing to provide users in the domestic research and education community seamless network connectivity and to support tetherless extension of research environment. In this paper, we analyze the foreign ID federation policies and compare them as a underlying work for making the domestic ID federation. Besides, we suggest some contents that should be included in the domestic ID federation policy. To activate the coming domestic ID federation, we need to first have a well-made federation policy. Then, we need to aggressively promote the domestic ID federation, develop various and fascinating services, and build a convenient support system for technology and service.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2230-2250
• /
• 2015

Multiple projectors with partially overlapping regions can be used to project a seamless image on a large projection surface. With the advent of high-resolution photography, such systems are gaining popularity. Experts set up such projection systems by subjectively identifying the types of errors induced by the system in the projected images and rectifying them by optimizing (correcting) the parameters associated with the system. This requires substantial time and effort, thus making it difficult to set up such systems. Moreover, comparing the performance of different multi-projector display (MPD) systems becomes difficult because of the subjective nature of evaluation. In this work, we present a framework to quantitatively determine the quality of an MPD system and any image projected using such a system. We have divided the quality assessment into geometric and photometric qualities. For geometric quality assessment, we use Feature Similarity Index (FSIM) and distance-based Scale Invariant Feature Transform (SIFT). For photometric quality assessment, we propose to use a measure incorporating Spectral Angle Mapper (SAM), Intensity Magnitude Ratio (IMR) and Perceptual Color Difference (ΔE). We have tested the proposed framework and demonstrated that it provides an acceptable method for both quantitative evaluation of MPD systems and estimation of the perceptual quality of any image projected by them.