• 지질공학
• /
• 제9권1호
• /
• pp.17-29
• /
• 1999

임해지역에 건설되는 지하 비축 기지 주변에서의 지하수 유동에 영향을 미치는 주요 요인들로는, 지형적인 영향, 공동 굴착으로 인한 영향 및 해수 침투에 따른 영향으로 대별된다. 본 논문은 모의 지하 원유 비축 기지 지역을 대상으로 이러한 현상에 의한 지하수 유동 특성 변화를 2차원 수치 모델로 해석하였다. 해석 결과 상기 3가지 요인 중 공동 굴착에 의한 영향이 가장 중요한 것으로 판명되었다. 이와 같은 조건에서 저장 공동으로부터 외부로의 지하수 유동 경로 해석이 상세히 수행되었다. 수치 모델링 결과 공동 굴착으로 인하여 공동 주변 지하수압에 심각한 변화가 일어났으나 이에 따라 지하수 유동 경로도 바뀌었다. 수벽공을 이용한 적절한 운영압을 적용함으로서 저장 공동에 비축된 유류의 누출을 저감할 수 있음을 보였다.

• 한국해양학회지
• /
• 제21권4호
• /
• pp.203-210
• /
• 1986

선형, 평행 수송모델을 세우고 이상적인 항해에 적용하였다. 이 간단한 해석 모델로서 지금 까지 예지되어 온 황해 남부의 역풍류 현상을 적절히 설명할 수 있 다. 수심이 임계수심(본모델 바다에서는 Hc=53m임)보다 깊은 해역에서는 압력 경도 력이 바람응력보다 우세하여 역풍류를 야기시킨다. 추정된 역풍류 속도는 풍속과 함께 증가하며 최대 역풍류는 황해의 깊은 골을 따라나타난다. 하계의 전형적인 남 풍속도 5-10노트에 대해서 황해골을 따른 역풍류(남향류)속도는 1-5cm s$^{-1}$로 추정된다. 반면에 동계의 전형적인 북풍속도 10-15노트에 대해서는 역풍류(북향류) 속도는 5-12cm s$^{-1}$ 이다. 이와 같은 속도 범위는 각각 하계의 황해 저층냉수 와 동계의 황해난류의 잠입속도에 대한 개략적인 추정치로서 사용될 수 있다.

• 한국환경복원기술학회지
• /
• 제2권3호
• /
• pp.1-9
• /
• 1999

This paper described the results of the characteristics of the near-bottom flow and field analysis of the tidal flats sediment. It was the aim of this paper to grasp current flow of tidal flat's environment and influence factor for environmental change forecast of tidal flats. Field measurement of water velocity, water elevation, bed materials test, and temperature distribution of tidal flat were conducted. Thereafter, current flow, turbidity and temperature distribution of tidal flat sediment have been discussed. The field research results showed that the fluctuating velocity near the seabed before and after its appearance at low tide was strongly affected by the wind wave. The resuspension of the sea-bottom sediment took place with great intensity before and after the appearance of the seabed at low tide. Both the sea water level and the weather condition were a significant influential factors. Such as, temperature and turbidity just on the surface and the shallow layer of seabed sediments were varied largely with time and weather conditions, but that its deeper layers was almost constant. Temperature on the seabed sediments was strongly influenced by irradiance and water depth. The temperature variation of the tidal flat and the variation characteristics of the current flow and turbidity depend greatly on the inhabiting environment of the tidal flat benthic organism.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.1-7
• /
• 2011

This study was accomplished to evaluate the performance of Multi Effect Distillation(MED) for solar thermal desalination system. It was designed Multi effect distillation with $3m^3$/day capacity and Shell&Tube type heat exchanger. Also, The effective heat transfer of Shell&Tube heat exchanger was used Cu(90%)-Ni(10%) corrugated tube. The parameters relating to the performance of Multi Effect Distillation are known as hot water flow rate. The experimental conditions for each parameters were $18^{\circ}C$ for sea water inlet temperature, $6m^3$/hour sea water inlet volume flow rate, $75^{\circ}C$ for hot water inlet temperature, 2.4, 3.6, and $4.8\;m^3$/hour for hot water inlet volume flow rate, respectively. The results are as follows, Development for Multi effect distillation was required about 40kW heat and 35kW cooling source to produce $3m^3$/day of fresh water. Based on the results of this study, It makes possible to secure economics of desalination system with solar energy which is basically needed development of high efficiency fresh water generator.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.227-233
• /
• 1999

This study is mainly concerned with phenomenon of cavitation-erosion on the several materials and corrosive liquids which were applied with vibrator (suggested by ASTM G-32, 20KHZ, 24{$mu}m$).The main results obtained are summarized as follows ; (1) The maximum erosion rate by cavitation erosion in both of fresh-water and sea-water appeared to be proportioned to their hardness and tensile strength. (2) Cavitation weight loss and rate of cast iron in sea-water condition were greater (approximately 3 times) than that in distilled-water condition, however in case of stainless and brass the cavitation weight loss and their rates were not so different in both of their conditions. (3) Cavitation weight loss of composite materials were shown as below on this test, DuraTough DL : Weight loss in sea-water condition were greater (approximately 2.3 times) than it's fresh-water condition. (4) As the result of observation with digital camea of specimens, the main tendency of cavitation erosion for metals, was that small damaged holes causing by cavitation e개sion was appeared with radial pattern, and composites materials was that small damaged holes were appeared randomly.

• 한국환경과학회지
• /
• 제20권11호
• /
• pp.1403-1415
• /
• 2011

To understand the transport of anchovy egg-larvae, an integrated model consisting of a hydrodynamic model and a three-dimensional Lagrangian diffusion model was used for the anchovy Engraulis japornicus egg-larvae trace. Fist, in order to determine the circulation characteristics of the South Sea of Korea, residual flow according to tide, density and wind effect was investigated. In offshore regions, tide-induced residual current tends to flow eastward during the spring tide and westward during the neap tide. Residual flow is irregular due to the bottom topography in the coastal area. No special tendency was apparent in the open sea. Especially, the flow in the offshore regions showed results similar to that of the Tsushima Warm Current. The transport of anchovy egg-larvae is decided the physical properties of sea water. It is estimated that anchovy eggs spawned near the Jeju Island travels offshore, rather than to coastal areas, and grow in the front area between the coastal sea and offshore regions.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.74-79
• /
• 2011

This study was accomplished to evaluate the performance of Multi Effect Distillation(MED) for solar thermal desalination system. It was designed Multi effect distillation with $3m^3/day$ capacity and Shell&Tube type heat exchanger. Also, The effective heat transfer of Shell&Tube heat exchanger was used Cu(90%)-Ni(10%) corrugated tube. The parameters relating to the performance of Multi Effect Distillation are known as hot water flow rate. The experimental conditions for each parameters were $18^{\circ}C$ for sea water inlet temperature, $6m^3/hour$ sea water inlet volume flow rate, $75^{\circ}C$ for hot water inlet temperature, 2.4, 3.6, and $4.8m^3/hour$ for hot water inlet volume flow rate, respectively. The results are as follows, Development for Multi effect distillation was required about 40kW heat and 35kW cooling source to produce $3m^3/day$ of fresh water. And, Performance ratio of Development Multi effect distillation was about 2.0191.

• 한국수산과학회지
• /
• 제44권6호
• /
• pp.612-621
• /
• 2011

The influences of inland pollution sources because of rainfall events on the bacteriological water quality in Geoje Bay, a major shellfish production area in Korea, were investigated. The sanitary status of sea water and shellfish after rainfall events was also evaluated. The flow rates of 13 streams around Geoje Bay showed 6 to 7-fold increases after 15 to 21 mm of rainfall. Peak pollution was observed in the Naegan Stream, the Gandeok Stream and the Seojeong Stream. The calculated impact area of inland pollution sources was 3.1 $km^2$ immediately after 15 mm of rainfall and expanded to 3.5 $km^2$ after 24 hours. These calculations of impacted area matched results from fecal coliform analyses with sea water. The distance between the major pollution source in the bay (the Gandeok Stream) and the station with the worst bacteriological water quality immediately after 15 mm of rainfall, which was below the Korean standard, was 0.8 km in a straight line; this distance increased to 2.0 km after a period of 24 hours. The area impacted by inland pollution sources after a 15 mm rainfall event was wider than after a 21 mm rainfall. Although the flow rate from inland pollution sources was higher, the concentration of fecal coliform in the discharged water was lower after higher rainfall events. These observations corresponded with the results of fecal coliform analyses with sea water samples. According to the evaluation of the influences of inland pollution sources and fecal coliform analyses on sea water and shellfish samples in Geoje Bay, pollutants from inland sources did not reach the boundary line of the shellfish growing area after rainfall events of 15 or 22 mm. The bacteriological water quality of the shellfish growing area in Geoje Bay met the Korean standard and US NSSP requirements for approved shellfish growing areas.

• 한국수산과학회지
• /
• 제21권5호
• /
• pp.288-291
• /
• 1988

마비성패류독으로 독화된 진주담치를 시료로 하여 축양 또는 가공방법에 따른 제독실험을 한 결과를 요약하면 다음과 같다. 1. 독화된 진주담치를 순환수조에서 축양하였을 때는 유의할 만한 제독효과는 나타나지 않았으나 유수수조에서 축양한 경우는 5일만에 약 $94\%$가 감소하였다. 2. PSP를 0.1N HCl 용액으로 유출하였을 때가 증류수로 추출하였을 때 보다 그 독성이 약 2-5배 높았다. 3. PSP가 $100\~150{\mu}g/100g$ 정도로 독화된 진주담치를 수도수에서 30분간 자숙하였을 때 그 독성은 동물실험결과 검출되지 않았다. 4. PSP가 $175{\mu}g/100g$ of digestive gland인 진주담치를 $116^{\circ}C$에서 65분간 가압살균하였을 때는 동물 실험결과 독성이 검출되지 않았으나 독소함양이 $9539{\mu}g/100g$ of digestive gland인 고독력의 진주담치는 같은 조건에서 가압살균하여도 $171{\mu}g$의 독력이 잔존하였다.

• 한국수산과학회지
• /
• 제21권5호
• /
• pp.297-302
• /
• 1988

마비성패류독으로 독화된 진주담치를 시료로 하여 축양 또는 가공방법에 따른 제독실험을 한 결과를 요약하면 다음과 같다. 1. 독화된 진주담치를 순환수조에서 축양하였을 때는 유의할 만한 제독효과는 나타나지 않았으나 유수수조에서 축양한 경우는 5일만에 약 $94\%$가 감소하였다. 2. PSP를 0.1N HCl 용액으로 유출하였을 때가 증류수로 추출하였을 때 보다 그 독성이 약 2-5배 높았다. 3. PSP가 $100\~150{\mu}g/100g$ 정도로 독화된 진주담치를 수도수에서 30분간 자숙하였을 때 그 독성은 동물실험결과 검출되지 않았다. 4. PSP가 $175{\mu}g/100g$ of digestive gland인 진주담치를 $116^{\circ}C$에서 65분간 가압살균하였을 때는 동물 실험결과 독성이 검출되지 않았으나 독소함양이 $9539{\mu}g/100g$ of digestive gland인 고독력의 진주담치는 같은 조건에서 가압살균하여도 $171{\mu}g$의 독력이 잔존하였다.