• The KSFM Journal of Fluid Machinery
• /
• v.2 no.4 s.5
• /
• pp.24-30
• /
• 1999

An analytical study has been carried out to investigate the effects of the check valve installation on the volumetric and adiabatic efficiencies in a scroll compressor. Both the valve displacement limit and the valve stiffness affected the valve motion, the pressure upstream of the valve, and the pattern of the mass flow through the valve to the discharge plenum. Nonetheless, the presence of the check valve did not cause any noticeable change in the volumetric efficiency. Only a slight increase in the compression work was needed to overcome the pressure increase in front of the valve. The pressure build-up upstream of the valve can be alleviated with the larger limit of the valve lift and a smaller valve stiffness.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.1 s.6
• /
• pp.37-42
• /
• 2000

Analytical and experimental investigations have been carried out on the gas pulsations in the discharge paths of a high-side horizontal scroll compressor, where the gas discharged from compression chamber is made to pass through several chambers inside the compressor shell. Model of Helmholtz resonators in series has been applied to this configuration to predict gas pulsation phenomena along the passages, and the calculation results have been compared with measured pressure time traces. Good agreements between the analytical and experimental results have been obtained. It has also been found that the compressor performance is somewhat affected by the size of individual chambers inside the compressor shell.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.6
• /
• pp.1707-1714
• /
• 2016

Let $C{\subset}{\mathbb{P}}^r$ be a nondegenerate projective curve of degree d > r + 1 and of maximal regularity. Such curves are always contained in the threefold scroll S(0, 0, r - 2). Also some of such curves are even contained in a rational normal surface scroll. In this paper we study the minimal free resolution of the homogeneous coordinate ring of C in the case where $d{\leq}2r-2$ and C is contained in a rational normal surface scroll. Our main result provides all the graded Betti numbers of C explicitly.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.828-831
• /
• 2010

본 논문은 CAD/CAM Software의 Script 기능을 이용하여 정밀한 자유곡선을 정확하고, 빠르게 생성할 수 있도록 하기 위한 기법을 연구 결과로서, 적용대상은 Equiangular Scroll Curve 생성을 대상으로 하였다. 관련 식을 검토하기 위하여 Excel Software을 이용하여 검증하였고, Visual Basic Language를 이용하여 보다 편리하게 Scroll Curve를 생성하는 기법을 연구하였다. 그 결과 여섯가지 변수를 설정하여 각각의 Scroll Curve를 생성하여 그 결과를 CAD 화면에 Drawing하여 도면을 생성, 편집할 수 있도록 하였다. 그리고 타 Software와 호환이 가능하도록 하여 다양한 Software에서 사용이 가능하도록 할 수 있게 하였다.

• Journal of information and communication convergence engineering
• /
• v.2 no.4
• /
• pp.237-242
• /
• 2004

In this paper, we introduce a complex systems synchronization method using hyper-chaos circuit consist of State-Controlled Cellular Neural Network (SC-CNN). We make a complex systems using SC-CNN with the n-double scroll. A complex system is created by applying identical n-double scroll or non-identical n-double scroll and Chua's oscillator with weak coupled method to each cell. Complex systems synchronization were achieved using GS(Generalized Synchronization) method between the transmitter and receiver about each state variable in the SC-CNN.

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.217-222
• /
• 2003

In this paper, we introduce a hyper-chaos synchronization method using hyper-chaos circuit consist of State-Controlled Cellular Neural Network (SC-CNN). We make a hyper-chaos circuit using SC-CNN with the n-double scroll. A hyper-chaos circuit is created by applying identical n-double scroll or non-identical n-double scroll and Chua's oscillator with weak coupled method to each cell. Hyper-chaos synchronization was achieved using GS(Generalized Synchronization) method between the transmitter and receiver about each state variable in the SC-CNN.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.2
• /
• pp.59-64
• /
• 2010

A design method of Sirocco fan is developed for constructing 3-D impeller and scroll geometries, and for predicting both the aerodynamic performance and the noise characteristics of the designed fan. The aerodynamic blading design of fan is conducted by blade angle, camber line determinations and airfoil thickness distribution, and then the scroll geometry of fan is designed by using logarithmic spiral. The aerodynamic performance of designed fan is predicted by the meanline analysis with flow blockage, slip and pressure loss correlations. Based on the predicted performance data, fan noise is predicted by two models for cutoff frequency and broadband noise sources. The present predictions for the performance and the noise level of actual fans are well agreed with measurement results.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.65-68
• /
• 2004

The design procedure for centrifugal blower with high inlet resistance is not presented yet. Overall fluid dynamic performance is estimated for comparison between the case of atmospheric inlet condition and the present model. Detail information between blades is prepared by using a commercial program, SCRYU-Tetra. A centrifugal blower with large inlet pressure is adopted in an air purifier having filtering devices. As the inlet residence increases the flow rate of the system is decreased. In parallel, outlet area of the system affects the performance of the system in the sense of flow balance. Consequently, the flow balance between the inlet and outlet becomes an important parameter for the design of the scroll casing for the centrifugal blower with high inlet pressure.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.242-247
• /
• 2000

In this study, the Rayleigh's energy method and the Rayleigh-Ritz method on the basis of Flugge's shell theory was used to analyze the dynamic characteristics of the scroll compressor housing with clamped boundary condition. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.193-198
• /
• 2000

For an inverter-driven compressor, the discharge temperature increased with a rise of frequency, Therefore, it is necessary to control the discharge temperature at high frequencies in order to obtain system reliability and efficiency. This paper describes the effects of liquid injection system on the performance of an inverter-driven scroll compressor. Experiments were performed at ASHRAE-T conditions. Frequency was altered from 45 to 105Hz. As results of the present work, the refrigerant discharge temperature fur the injection system was dropped approximately $10{\sim}20^{\circ}C$ as compared to those for the non-injection system. The COP of the compressor was improved approximately $0.8{\sim}9.3%$ at high frequencies(75, 90, and 105 Hz).