Bioassay techniques using young leaves and roots were developed to screen resistance of Atractylis spp. against Phytophthora drechsleri. Among 638 plants collected from various regions of Korea from 1994 to 1996, 67 were pre-screened in fields naturally infested with P. drechsleri, which is the causal pathogen of rhizome rot of Atractylis. Among the pre-screened sources, 18 (ca. 26.8%) were highly resistant to the pathogen in leaf inoculation. In the root inoculation test, abundant sporangia were formed in susceptible plant roots, while only a few or no sporangia were produced on the roots which were found resistant in the leaf inoculation test. Among the selected resistant plants, A. japonica 96066 and 96104 were used to cross with another species, A. macrocephala 96362 that showed high yield with good quality of rhizome but susceptible to the pathogen. The F$_1$hybrids designated as HA03 turned out to be resistant to the pathogen, indicating that resistant gene(s) was inherited. Among intra-species hybrids of A. japonica, HA07 and HA09 were resistant to the pathogen in leaf inoculation and moderate in root inoculation. However, HA08 was susceptible in both inoculation tests. This result suggests that the parent material might be genetically heterogeneous. Further genetic study should be carried out to verify this phenomenon.
Journal of Korean Society of Industrial and Systems Engineering
/
v.35
no.1
/
pp.101-106
/
2012
Ship handling simulator is a virtual ship navigating system with three dimensional screen system and simulation programs. FTS simulation can produce theoretically infinite experiment tests without time constraint, but which results in collecting determinstic observations. RTS simulation can collect statistical observations but has disadvantage of spending at least 30 minutes for a single experiment. The previous studies suggested that the number of experiment conditions to be tested could be reduced to obtain random data with RTS simulation by focusing on highly difficult experiment condition for ship handling. It has the limitation of not estimating the distribution of ship handling difficulty for the route. In this paper, similarity and clustering analysis are suggested for reduction methodology of experiment conditions. Similarity of experiment conditions are measured as follows: euclidean distance of ship handling difficulty index and correlation matrix of distance differences from the designed route. Clustering analysis and multi-dimensional scaling are applied to classify experiment conditions with measured similarity into reducing the number of RTS simulation conditions. An empirical result on Dangin harbor is shown and discussed.
Korean Journal of Computational Design and Engineering
/
v.19
no.2
/
pp.191-201
/
2014
A 3D CAD system that can be used on a smart device is proposed. Smart devices are now a part of everyday life and also are widely being used in various industry domains. The proposed 3D CAD system would allow modeling in a rapid and intuitive manner on a smart device when an engineer makes a 3D model of a product while moving in an engineering site. There are several obstacles to develop a 3D CAD system on a smart device such as low computing power and the small screen of smart devices, imprecise touch inputs, and transfer problems of created 3D models between PCs and smart devices. The author discusses the system design of a 3D CAD system on a smart device. The selection of the modeling operations, the assignment of touch gestures to these operations, and the construction of a geometric kernel for creating both meshes and a procedural CAD model are introduced. The proposed CAD system has been implemented for validation by user tests and to demonstrate case studies using test examples. Using the proposed system, it is possible to produce a 3D editable model swiftly and simply in a smart device environment to reduce design time of engineers.
International Journal of Advanced Culture Technology
/
v.8
no.3
/
pp.198-205
/
2020
The purpose of this study is to investigate the effect of real-time remote video instruction using zoom on learners' English reading achievement. The study also sought to identify the efficiency of zoom video lectures and consider supplementing them by surveying learners' opinions and satisfaction regarding zoom video lectures. To this end, control and experimental groups were set up, and two achievement tests and a questionnaire were conducted. The study's results demonstrated that zoom video lectures have a positive effect on learners' English reading achievement. The questionnaire found that learners are satisfied with zoom video lectures for the following reasons: 'increased interest in and motivation towards learning', 'self-directed learning', 'active interaction', 'ease of access', 'ease of information retrieval'. At the same time, the questionnaire also found that some learners are dissatisfied with zoom video lectures due to 'mechanical errors or defects', 'poor audio quality', and 'the need to add customized functions for efficient classes'. In practice, zoom video lectures must be supplemented with automatic attendance processing, convenient data upload and download, and more efficient video screen management. Given the recent increase in online classes, we, as instructors, must develop teaching activities and/or strategies for video lectures that can encourage active participation by learners.
International Journal of Concrete Structures and Materials
/
v.10
no.3
/
pp.337-353
/
2016
The successful completion of the present research would be achieved using ground waste glass (GWG) microparticles in self-consolidating concrete (SCC). Here, the influences of GWG microparticles as cementing material on mechanical and durability response properties of SCC are investigated. The aim of this study is to investigate the hardened mechanical properties, percentage of water absorption, free drying shrinkage, unit weight and Alkali Silica Reaction (ASR) of binary blended concrete with partial replacement of cement by 5, 10, 15, 20, 25 and 30 wt% of GWG microparticles. Besides, slump flow, V-funnel, L-box, J-ring, GTM screen stability, visual stability index (VSI), setting time and air content tests were also performed as workability of fresh concrete indicators. The results show that the workability of fresh concrete was increased by increasing the content of GWG microparticles. The results showed that using GWG microparticles up to maximum replacement of 15 % produces concrete with improved hardened strengths. From the results, when the amount of GWG increased there was a gradual decrease in ASR expansion. Results showed that it is possible to successfully produce SCC with GWG as cementing material in terms of workability, durability and hardened properties.
This study was conducted to test on the resistance of varieties bred by crossing with Asominori to bacterial leaf blight. Nakdongbyeo and Dongjinbyeo which were susceptible to HB 9011, 8 resistant varieties including Ilmibyeo derived from Asominori and Asominori, Hwangok, 13 varieties including Chukoku 45 which were resistance to HB 9011, HB 9022 and HB 9033 were used to screen their res ponce depending on the various screening methods such as the true resistance, the secondary infection resistance and the disease common field test methods, and the results are as follows: Among 13 varieties tested, 11 varieties including llmibyeo showed tme resistance to HB 9011. Less than 1.0cm of disease lesion were developed on these varieties. Disease lesion was not developed on most of the Asominori lines including Daechongbyeo against IIB9011 and 1lmibyeo was also resistance to HB 9011, on this variety disease lesion area rate was 1.2%, and 7 varieties including Hwajinbyeo showed field resistance to HB 9022. Disease lesion area rate were 19.6% on Nakdongbyeo. 15.6% on Dongjinbyeo, from 3.0% to 2.4% on Asominori lines, and 0.5% on the Asominori when screened at disease common area. Disease was not developed on Keumnambyeo. Significant correlation coefficiences were found between the results from the test methods of the true resistance, the field resistance ancl the field resistance at disease common field tests on Asominori lines, but in some cases, even the varieties on which disease lesions developed, showed field resistance to HB 9022 and HB 9033.
This study is aimed to investigate the role of paired boxed gene 1 (PAX1) methylation analysis by methylation-sensitive high-resolution melting (MS-HRM) in the detection of high grade lesions in atypical squamous cells cannot exclude high-grade squamous intraepithelial lesion (ASC-H) and compared its performance with the Hybrid Capture 2 (HC2) human papillomavirus (HPV) test. In our study, 130 cases with a diagnosis of ASC-H from the cervical cytological screening by Thinprep cytologic test (TCT) technique were selected for triage. Their cervical scrapings were collected and evaluated by using PAX1 methylation analysis (MS-HRM) and high-risk HPV DNA test (HC2), followed by colposcopy and cervical biopsy. Chi-square test were used to test the differences of PAX1 methylation or HPV infection between groups. In the detection of CIN2+, the sensitivity, specificity, the PPV, NPV and the accuracy of PAX1 MS-HRM assay and high-risk HPV (HR-HPV) tests were respectively 80.6% vs 67.7%, 94.9% vs 54.5%, 83.3%, vs 31.8%, 94.0% vs 84.4%, and 91.5% vs 57.7%. The PAX1 MS-HRM assay proved superior to HR-HPV testing in the detection of high grade lesions (CIN2+) in ASC-H. This approach could screen out the majority of high grade lesion cases of ASC-H, and thus could reduce the referral rate to colposcopy.
Journal of Korean Library and Information Science Society
/
v.35
no.1
/
pp.303-317
/
2004
The purpose of this study was to develop a framework for predicting searching performance through an understanding of how cognitive ability relates to searching process and outcome. Specifically, this study examined the relationship between spatial visualization, logical reasoning, integrative reasoning, and information searching process and outcome. Information searching process was assessed by seven search process indicators: (1) search command selection: (2) combination of search commands; (3) application of Boolean logic: (4) application of truncation; (5) use of limit search function; (6) number of search statements; and (7) number of search errors made. Searching outcome was assessed by the number of correct answers to search questions. Subjects first took three standardized cognitive tests that measured cognitive abilities, and performed online catalog searching in response to seven information search questions. The searches were logged using Lotus ScreenCam, and reviewed for the analysis. Factor analysis was used to find underlying structures of the seven search process variables. Multiple regression analysis was applied to examine the predictive power of three cognitive variables on three extracted factors, and search outcome. Results of the data analysis showed that individual differences in logical reasoning could predict information searching process and outcome.
Journal of the Korea Institute of Information and Communication Engineering
/
v.6
no.6
/
pp.974-979
/
2002
There are so many kind of a control program that is applied in various process fields such as power generation plant, water treatment plant, incinerator plant, chemical plant, cement plant etc.. Because an engineer in field edits and changes and debugs and tests properly control programs using text-based control language, it is very hard for the him to apply to plant. Therefore, this research implemented a graphical tool for control program builder that is applicable to various plants and usable engineers having a little knowledge for control language. I wish to run more efficiently precision process control offering function that can see visual expression about flow of control signal and intermediate output values of control program displayed in screen using this implemented function block builder.
The 40% of wall criterion, which is generally used for the plugging of steam generator tubes, may be applied only to a single crack. In the previous study, a total of 9 failure models were introduced to estimate the local failure of the ligament between cracks and the optimum coalescence model of multiple collinear cracks was determined among these models. It is, however, known that parallel axial cracks are more frequently detected during an in-service inspection than collinear axial cracks. The objective of this study is to determine the plastic collapse model which can be applied to the steam generator tube containing two parallel axial through-wall cracks. Nine previously proposed local failure models were selected as the candidates. Subsequently interaction effects between two adjacent cracks were evaluated to screen them. Plastic collapse tests for the plate with two parallel through-wall cracks and finite element analyses were performed for the determination of the optimum plastic collapse model. By comparing the test results with the prediction results obtained from the candidate models, a plastic zone contact model was selected as an optimum model.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.