• 제목/요약/키워드: scrT

검색결과 60건 처리시간 0.025초

Bifidobacterium longum의 Sucrose 대사 관련 scr 유전자군의 특성 규명 (Characterization of the scr Gene Cluster Involved! in Sucrose Utilization in Bifidobacterium longum)

  • 권태연;이종훈
    • 한국미생물·생명공학회지
    • /
    • 제32권3호
    • /
    • pp.199-205
    • /
    • 2004
  • Bifidobacterium longum SJ32 균주로부터 cloning한 sucrose phosphorylase 유전자를 포함하는 8.6 kb의 EclRI 단편의 염기서열을 결정하였다. 5개의 open reading frame이 존재하였고, 상동성 검색의 결과, sucrose대사에 관여하는 sucrose phosphorylase (ScrP), sucrose transporter (ScrT), GalR-LacI-type transcriptional regulator (ScrR) 유전자의 존재를 확인하였다. SJ32 균주의 scrPTR 유전자군은 다른 B. longum균주의 scrPTR과 배열이 동일하고, 각 유전자 산물이 아미노산 수준에서 94%이상의 상동성을 가지고 있지만, 주변 유전자는 다르게 나타나 B. longum균주 간의 scrPTR 유전자군의 horizontal transfer를 추정하게 한다. 대장균에서의 scrP와 scrT의 동시 발현은 세포 내로의 sucrose 유입을 증가시켜 sucrose phosphorylase의 활성 증가에 영향을 주는 것으로 나타나, scrT가 sucrose transporter유전자임을 뒷받침한다. 기존에 보고된 B. longum NCC2705균주의 유전체로부터 scrPTR외에도 sucrose대사에 관여하는 다양한 sucrose multiple transport system에 관여하는 유전자의 존재가 확인되어, B. longum이 다양한 sucrose유입체계를 보유하고 있음이 추정된다.

IEC60947-4에 따른 전자개폐기 전기적 수명시험설비의 과도현상을 고려한 SCR최적 정격선정에 대한 연구 (The transient analysis for choosing the optimal SCR ratings of AC3 utilization category testing equipment used for electrical durability test for magnetic switch)

  • 류행수;김갑동;한규환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 A
    • /
    • pp.354-356
    • /
    • 2004
  • This paper is the transient analysis for choosing the optimal SCR ratings of AC3 utilization category testing equipment(AC3 TE) used for electrical durability test for magnetic switch according to IEC60947-4 Annex B by utilizing EMTP -ATPDraw. Magnetic contactor closes and opens the motor load with ON/OFF switch of electronic contactor. It is also used for protecting and controlling the load. Magnetic contactor detects the over-current flow in the load with a over-current relay and disconnects the load by opening its control power. The key cost of AC3 TE is the SCR ratings. The more decreases SCR ratings, the more decreased the cost is, but it is impossible to ensure the reliability. On the other hand, the more increases SCR ratings, the more increased the cost is. Thereupon, in this paper after the testing circuit is simulated by using EMTP-ATPDraw the SCR ratings will be applied in order to guarantee the testing reliability of PT&T(Power Testing and Technology institute in LG Industrial Systems Co.,Ltd.).

  • PDF

SCR, MVSCR, LVTSCR의 Turn-on time 및 전기적 특성에 관한 연구 (Analysis of SCR, MVSCR, LVTSCR With I-V Characteristic and Turn-On-Time)

  • 이주영
    • 전기전자학회논문지
    • /
    • 제20권3호
    • /
    • pp.295-298
    • /
    • 2016
  • 본 논문에서는 기존 ESD 보호소자인 SCR과 MVSCR, LVTSCR의 Turn-on-Time 및 전기적 특성을 시놉시스사의 T-Cad 시뮬레이션을 통하여 분석하였다. 분석결과 세 소자 모두 대략 2V 에서 3V 내외의 홀딩전압 특성을 보였으며, SCR은 약 20V의, MVSCR은 약 12V, LVTSCR은 9V로 순차적으로 개선된 트리거 특성을 보였다. 턴-온타임 시뮬레이션 결과는 SCR이 2.8ns, MVSCR과 LVTSCR은 각각 2.2ns, 2.0ns로 LVTSCR이 가장 짧은 턴-온 특성을 보였다. 반면 IT2 는 SCR이 약 7.7A, MVSCR은 5.5A LVTSCR은 4A의 특성을 보였으므로 I/O 및 파워 클램프 단에 적용 시 동작전압에 따른 최적화된 소자를 선택해야 한다.

LVTSCR 기반의 2-Stack 구조 설계를 위한 ESD 보호회로에 관한 연구 (A Study on ESD Protection Circuit for 2-Stack Structure Design Based on LVTSCR)

  • 서정윤;도경일;채희국;서정주;구용서
    • 전기전자학회논문지
    • /
    • 제22권3호
    • /
    • pp.836-841
    • /
    • 2018
  • 본 논문에서는 대표적인 ESD 보호회로인 SCR, LVTSCR을 기반으로 하여 특정한 어플리케이션의 요구 전압에 맞추어 설계하기 위한 Stack 기술에 대하여 서술한다. 또한 기존 구조와는 다른 SCR 기반의 ESD 보호회로를 제시하여 Stack기술에 적용함으로써, 주요 파라미터인 트리거 전압과 홀딩 전압의 변동에 대하여 검증한다. 새로이 추가되는 SCR 기반의 보호 회로의 경우 추가적인 N+, P+ 영역의 삽입으로 인해 보다 높은 홀딩 전압을 갖는 ESD 보호회로이다. 또한 시놉시스사의 T-CAD 시뮬레이터를 이용하여 제안된 ESD 보호회로의 전기적 특성을 검증을 실시하였다.

SNCR/SCR Combined 시스템을 이용한 DeNOx 연구

  • 최상기;남창모;박상원;최성우
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2001년도 가을 학술발표회 발표논문집
    • /
    • pp.26-27
    • /
    • 2001
  • SNCR 기술을 이용한 NOx 저감은 반응온도 850~$1100^{\circ}C$에서 효과적이였으며, 몰비($NH_3$/NOx), $O_2$ 농도에 상당히 영향을 받고 있었다. 최적온도 $950^{\circ}C$, 몰비 1.5에서 약65%의 NOx 제거효율을 얻을 수 있으며, 온도구배가 없고 $O_2$ 농도가 2~4%로 낮아질 경우 더 높은 제거효율이 기대된다. SCR 기술에 의한 NOx 저감을 위해 $V_3$$O_{5}$/-$WO_3$/$TiO_2$ 상용촉매를 사용하였으며, 반응 온도는 200~$500^{\circ}C$ 범위로 확인되었으며, 약 84%의 NOx 제거효율이 몰비 1.5 에서 얻어졌다. $O_2$ 농도가 21%로 높아짐에 따라 상당히 효율이 떨어짐이 밝혀졌다. SNCR/SCR combined 시스템은 몰비=2.0, $T_{SNCR}$/=$850^{\circ}C$, $T_{SCR}$ /=$350^{\circ}C$ 반응조건에서는 약 93%의 NOx 저감효율을 보여주어 SNCR, SCR 단위기술보다 더 효과적이었다.

  • PDF

Application of SNCR/SCR Combined process for effective operation of SCR Process

  • 최성우;최상기
    • 한국환경과학회지
    • /
    • 제12권1호
    • /
    • pp.47-54
    • /
    • 2003
  • This paper have examined the optimum combination of SNCR and SCR by varying SNCR injection temperature and NSR ratio along with SCR space velocity. NOx reduction experiments using a SNCR/SCR combined process have been conducted in simple NO/NH$_3$/O$_2$ gas mixtures. Total gas flow rate was kept constant 4 liter/min throughout the SNCR and SCR reactors, where initial NOx concentration was 500 ppm in the presence of 5% O$_2$. Commercial catalyst, sulfated V$_2$O$\_$5/-WO$_3$/TiO$_2$, was used for SCR NOx reduction. The residence time and space velocity were around 1.67 sec, 2,400 h$\^$-1/ and 6,000 h$\^$-1/ in the SNCR and SCR reactors, respectively. SNCR NOx reduction effectively occurred in a temperature window of 900-950$^{\circ}C$. About 88% NOx reduction was achieved with an optimum temperature of 950$^{\circ}C$ and NSR=1.5. SCR NOx reduction using commercial V$_2$O$\_$5/-WO$_3$-SO$_4$/TiO$_2$ catalyst occurred in a temperature window of 200-450$^{\circ}C$ 80-98% NOxreduction was possible with SV=2400 h$\^$-1/ and a molar ratio of 1.0-2.0. A SNCR/SCR(SV=6000 h$\^$-1/) combined process has shown same NOx reduction compared with a stand-alone SCR(SV=2400 h$\^$-1/) unit process of 98% NOx reduction. The NH$_3$-based chemical could routinely achieve SNCR/SCR combined process total NOx reductions of 98% with less than 5 ppm NH$_3$ slip at NSR ranging from about 1.5 to 2.0, SNCR temperature of 900$^{\circ}C$-950$^{\circ}C$, and SCR space velocity of 6000 h$\^$-1/. Particularly, more than 98% NOx reduction was possible using the combined process under the conditions of T$\_$SNCR/=950$^{\circ}C$, T$\_$SCR/=350$^{\circ}C$, 5% O$_2$, SV=6000 h$\^$-1/ and NH$_3$/NOx=1.5. A catalyst volume was about three times reduced by SNCR/SCR combined process compared with SCR process under the same controlled conditions.

SCR 폐촉매 침출액으로부터 습식제련법에 의한 바나듐, 텅스텐의 회수 (Recovery of the Vanadium and Tungsten from Spent SCR Catalyst Leach Solutions by Hydrometallurgical Methods)

  • 최인혁;문경혜;전종혁;이진영;라제쉬 쿠마 죠티
    • 자원리싸이클링
    • /
    • 제29권2호
    • /
    • pp.62-68
    • /
    • 2020
  • 2000년대에 접어들면서 선택적 촉매 환원(SCR) 촉매에 대한 광범위한 수요가 점차 증가하고 있다. SCR 촉매는 환경보호를 위해 질소산화물(NOx)의 배출 방지에 사용 된다. 일반적으로 SCR 촉매의 주성분은 TiO2(70~80 %), WO3(7~10 %), V2O5(~1 %) 등으로 구성되어있다. SCR 폐촉매는 대개 매립되어 폐기 되는데, 분해도가 극히 낮아 매립지에 영구적으로 남아있게 된다는 문제점을 가지고 있다. 따라서 환경을 보호하고 페촉매에 함유되어 있는 유가금속의 회수를 위하여 새로운 첨단기술의 개발이 필요하다. 이러한 SCR 폐촉매의 처리를 위해 침출 및 액-액 추출과 같은 습식제련법이 설계되고 개발되었다. 첫 번째 단계에서 SCR 폐촉매로부터 바나듐과 텅스텐을 선택적으로 침출한 후, 액-액 추출 공정에 의해 처리되었다. 바나듐과 텅스텐의 선택적 추출을 위해 D2EHPA, PC 88A, TBP, Cyanex 272, Aliquat 336과 같은 다양한 상용 용매추출제를 이용한 실험을 수행하였다. 바나듐과 텅스텐의 추출 및 분리를 위해 세정(scrubbing) 및 탈거(stripping) 연구가 수행되고 최적화 되었다. 3상의 생성을 억제하기 위해 iso-decanol 시약을 사용하여 최적화 하였다.

SCR 촉매 일체형 덕트 버너 개발에 대한 IoT 기초연구 (IoT Basic Study on Development of Duct Burner Integrated with SCR Catalyst)

  • 장성철;심요섭
    • 사물인터넷융복합논문지
    • /
    • 제7권3호
    • /
    • pp.75-80
    • /
    • 2021
  • NOx의 배출저감 방법으로 선박용 디젤엔진의 최적화만으로는 배기가스의 NOx 배출량 제한을 만족시킬 수 없기 때문에 반드시 배기가스를 후처리하여 NOx를 저감할 수 있는 방안이 요구된다. 본 연구에서는 현재 개발 중에 있는 선박용 SCR 촉매 유닛 일체형 덕트용 오일 버너 시스템에서 요소수를 NH3로 효과적으로 변환하기 위한 이류체 노즐과 믹싱 챔버 덕트에 관한 설계 타당성 여부를 속도분포 및 온도분포에 대한 전산열유동 해석을 통해 검토하고자 한다.

CLASSIFICATION OF TWISTED PRODUCT LIGHTLIKE SUBMANIFOLDS

  • Sangeet Kumar;Megha Pruthi
    • 대한수학회보
    • /
    • 제60권4호
    • /
    • pp.1003-1016
    • /
    • 2023
  • In this paper, we introduce the idea of twisted product lightlike submanifolds of semi-Riemannian manifolds and provide non-trivial examples of such lightlike submanifolds. Then, we prove the non-existence of proper isotropic or totally lightlike twisted product submanifolds of a semi-Riemannian manifold. We also show that for a twisted product lightlike submanifold of a semi-Riemannian manifold, the induced connection ∇ is not a metric connection. Further, we prove that a totally umbilical SCR-lightlike submanifold of an indefinite Kaehler manifold ${\tilde{M}}$ does not admit any twisted product SCR-lightlike submanifold of the type M×ϕMT, where M is a totally real submanifold and MT is a holomorphic submanifold of ${\tilde{M}}$. Consequently, we obtain a geometric inequality for the second fundamental form of twisted product SCR-lightlike submanifolds of the type MT×ϕM of an indefinite Kaehler manifold ${\tilde{M}}$, in terms of the gradient of ln ϕ, where ϕ stands for the twisting function. Subsequently, the equality case of this inequality is discussed. Finally, we construct a non-trivial example of a twisted product SCR-lightlike submanifold in an indefinite Kaehler manifold.

SCR 기반 고감내 특성을 갖는 기생 PNP BJT 삽입형 새로운 ESD 보호회로에 관한 연구 (A Study on a New ESD Protection Circuit with Parasitic PNP BJT Insertion Type with High Robustness Characteristics Based on SCR)

  • 채희국;도경일;서정윤;서정주;구용서
    • 전기전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.80-86
    • /
    • 2018
  • 본 논문에서는 기존 ESD 보호회로인 SCR, LVTSCR 보다 향상된 전기적 특성을 갖는 새로운 PNP 바이폴라 삽입형 ESD 보호회로를 제안한다. 제안된 회로는 기존 SCR에 대비하여 약 9V낮은 8.59V의 트리거 전압을 가지고, 기생 PNP가 하나 더 동작하면서 높은 감내특성을 갖는다. 또한 제안된 ESD 보호회로의 실제 설계 적용을 위해 변수 L을 늘리면서 기생 PNP의 베이스 길이를 늘려 홀딩전압을 증가시켰다. 제안된 소자의 전기적 특성 검증을 위해 Synopsys사의 T-CAD 시뮬레이터를 사용하였다.