• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.2
• /
• pp.49-67
• /
• 2020

This study was conducted to compare and analyze forest vegetation distributed in Geumosanseong-inside in Geumosan Provincial Park from 2017.10 to 2019.6. The vegetation structure was classified by the phytosociological method and TWINSPAN and the correlation between the community structure and the environmental factors was analyzed using DCCA ordination analydsis. The vegetation structures are Quercus mongolica, Fraxinus mandshurica, Q. acutissima, Larix leptolepis, Prunus padus and Morus alba community by the phytosociological method and 16 communities under TWINSPAN. The importance value of Q. mongolica(64.5) was the highest, and followed by F. mandshurica, L. leptolepis, Acer pseudosieboldianum, M. alba, P. padus, Q. acutissima, Sorbus alnifolia, P. serrulata var. pubescens, F. sieboldiana, Rhododendron schlippenbachii and Castanea crenata which is consistent with species having the dominance status by analysis of the vegetation structure. As the results of DBH analysis for taxon with high importance values, Q. mongolica and M. alba represented normal distribution, and thus, the dominance status of these species is likely to continue. L. leptolepis will maintain the dominance status due to high density of large individuals as compared with species above medium size. However, it will decrease because of high mortality after increase in age class. F. mandshurica and P. padus continue to show dominance status due to high density of young individuals as compared with species above medium size. Q. acutissima have high density of individuals above intermediate size and low density of young individuals, and thus, will maintain the dominance status. A. pseudosieboldianum, F. sieboldiana and R.schlippenbachii which are arborescent will present continuously high dominance status because of high density of young individuals. Soil analysis shows that whereas pH, Ca²⁺ and Mg²⁺ in the research area were lower than the average values of overall forest soil and O.M, T-N, C.E.C and P₂O₅ were higher. We expected that these results were due to agricultures until 50 years ago in Geumosanseong-inside. As a result of DCCA ordination analysis using eleven environmental factors and communities classified by the phytosociological method analysis showed that Q. mongolica was distributed in the environment with higher elevation and O.M and steep slope, and lower P₂O₅, Mg²⁺ and Ca²⁺. In contrast to F. mandshurica, Q. acutissima was distributed in higher K⁺ and lower pH. L. leptolepsis was distributed in various environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.1
• /
• pp.101-108
• /
• 2024

The total number of railroad stations managed in Korea is 322 (including general and wide-area railways), and a considerable number of stations are aging. In terms of the size of the existing railway station and the number of entrances, it has not been possible to secure adequate service capacity, and the demand for station improvement is increasing due to changes in surrounding conditions such as urban development. In the past, railroad stations were focused on the simple function of a connection passage in terms of maintenance or management, but in recent years, railroad stations are also changing to an atmosphere that they should be reborn as a user-centered comfortable, convenient, and safe service provision space. In this study, a case study related to the improvement of the old railway station was conducted to derive an improvement plan that meets the improvement standard of the old station, and the service level evaluation standard was developed. By introducing the concept of service level (LOS) in the development model, station congestion, station movement convenience, and station safety were selected as evaluation indicators. In addition, this development model applied an analytical stratification technique to divide various evaluation elements of each indicator into major and detailed elements and derive the relative importance of the elements by class. Priority for improvement was derived using the ratio of the number of E and F on the LOS for each facility. Based on this study, it is expected to be helpful in using it as an evaluation criterion for improving objective and equitable railway station.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.184-193
• /
• 2016

Purpose: To evaluate marginal leakage of bulk fill flowable composite resin filling with different curing time by using microcomputed tomography technology. Materials and Methods: 30 previously extracted human molars were randomly divided into 6 groups based upon restorative system and different curing time. Class II cavities (vertical slot cavities) were prepared. An individual metallic matrix was used to build up the proximal wall. The SonicFill or SureFil SDR flow was inserted into the preparation by using 1 bulk increment, followed by light polymerization for different curing times. The different exposure times were 20, 40, and 60 seconds. All specimens were submitted to 5,000 thermal cycles for artificial aging. Micro-CT scanning was performed by using SkyScan 1272. One evaluator assessed microleakage of silver nitrated solution at the resin-dentin interface. The 3D image of each leakage around the restoration was reconstructed with CT-Analyser V.1.14.4. The leakage was analyzed with the Mann-Whitney test. Results: Significant differences were observed between the light curing times, but no significant differences were found between the bulk fill composite resins. Increasing in the photoactivation time resulted in greater microleakage in all the experimental groups. Those subjected to 60 seconds of light curing showed higher microleakage means than those exposed for 20 seconds and 40 seconds. Conclusion: Increasing the photoactivation time is factor that may increase marginal microlekage of the bulk fill composite resins. Further, micro-CT can nondestructively detect leakage around the resin composite restoration in three dimensions.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.281-285
• /
• 2015

An oleaginous fungus was isolated from soil and identified as Mortierella sp. (M-12) for producing arachidonic acid (AA). Cell disruption methods, extraction methods, and particle sizes of freeze-dried biomass were tested to achieve maximum extraction of total lipids and AA. M-12 grown in glucose yeast media at $25^{\circ}C$ for 7 days contained 35.5% total lipid, and 47% of the total lipid was AA. Lipid extraction yield from wet biomass was shown to be similar to that in a dry state. Maximum lipid extraction was achieved using a mixture of chloroform and methanol (2:1) as an extraction solvent. Different mechanical cell disruption methods did not affect lipid extraction yields. The smaller the particle size of the biomass, the better the lipid extraction yield was observed. Particle size of biomass was shown to more strongly affect lipid extraction than extraction time. The highest AA content was observed in the class of neutral lipids.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.1-13
• /
• 2007

In order to evaluate the local site effects at two town fortress areas in Korea where stone parapets were col-lapsed by historical earthquakes, site characteristics were assessed using site investigations such as borehole drillings and seismic tests. Equivalent-linear site response analyses were conducted based on the shear ways velocity ($V_s$) profiles and geotechnical characteristics determined from site investigations. The study sites are categorized as site classes C and B according to the mean $V_s$ to 30 m ranging from 500 to 850 m/s, and their site periods are distributed in the short period range of 0.06 to 0.16 sec, which contains the natural period of fortress wall and stone parapet. From the results of site response analyses in the study areas, for site class C indicating most of site conditions, contrary to site class B, the short-period (0.1-0.5 sec) and mid-period (0.4-2.0 sec) site coefficients, $F_a$ and $F_v$ specified in the Korean seismic design guide, underestimate the ground motion in short-period band and overestimate the ground motion in mid-period band, respectively, due to the high amplification in short period range, which represent the site-specific seismic response characteristics. These site-specific response characteristics indicate the potential of resonance in fortress walls during earthquake and furthermore could strongly affect the collapse of parapets resulted from seismic events in historical records.

• Analytical Science and Technology
• /
• v.28 no.5
• /
• pp.309-316
• /
• 2015

The analytical method of lead in plasma by ICP-MS was validated after securing environment within class 1,000 classification. We tested specificity and accuracy of within-run and between-run. According to measurement of the amount of suspended particulates in a clean room, 0.3~62 particles were detected in 0.3 µm size while 0.0~28.3 particles were observed in 0.5 µm size. Total suspended particulates met required environment with up to 90.3 particles. The MDL (Method detection limit) of the sample which has been fabricated using fetal bovine serum (FBS) blank was 1.77 ng/L, and LOQ (Limit of quantification) was 5.55 ng/L. The slope, intercept and correlation coefficient of the calibration curve were y=1.09×10⁻³x+4.88×10⁻² and r=0.9999, which showed good correlation. The specificity, within-run and between-run accuracy satisfied the standard at more than 50 ng/L. The average lead concentration in plasma of the general people, current workers and retired workers was 55.4 ng/L, 440 ng/L, and 132 ng/L.

• Journal of Engineering Education Research
• /
• v.11 no.1
• /
• pp.85-100
• /
• 2008

The purpose of this study is development of 'F1 in Schools Program' for elementary school student and validation of the program. Fifteen students were originally chosen from the W elementary school in Cheongju, Chungcheogbuk-Do. The children were tested on their understanding of science and 'F1 in Schools Program'. After developing the 'F1 in Schools Program', it was used in the classroom to evaluate applicability and to examine the responses from students, parents and schools. The program consists of 60 classes and the time of each class is 40 minutes. This study was conducted for 10 days from January 22nd, 2007 to February 2nd, 2007. CAD(Computer Aided Design), CFD(Computation Fluid Dynamics), CAM(Computer Aided manufacturing) and CNC Machine were used in this study and proved to be good materials for students in that they increased the students' participation and imagination. However, the children's cognitive and creative abilities as well as manuals written in English hampered the process. Most students, parents, schools seemed to be satisfied with use of the program. However, the schools showed that there was not enough understanding of the program as a whole. The processes with which students build and inspect using the $CO_2$Model Car not only improves the processing of the model but also enhanced the students scientific understanding related to the car speed.

• Journal of Technologic Dentistry
• /
• v.28 no.2
• /
• pp.331-346
• /
• 2006

Free-end partial dentures, which are supported by teeth surrounded by dental root membranes and elastic mucous membrane tissues, may cause stress to the abutment teeth due to external force imposed on the denture base, increase the mobility of the abutment teeth, and bring about a change in the periodontal tissue. General retainers used in partial dentures are categorized into clasp, attachment, and Konus crown. Stress imposed on the abutment teeth and mobility of the denture base have relations with the lifetime of a crown and abutment teeth, and have direct relations with the chewing ability. Thus, a need arises to make a comparative analysis of stress of the three direct retainers on the abutment teeth and interpret the mobility of the denture base. This study designed three kinds of removable partial dentures (one kind of attachment partial denture, one kind of Konus crown partial denture, and one kind of clasp partial denture), and fabricated Dentiforms of bilateral partial dentures (Kennedy Class I) with lower left 1st premolar and lower right 1st and 2nd premolars being as the abutment teeth. A strain gauge was installed in the mesial and distal surface of the lowerr left 1st premolar (No. 34) of the fabricated dentiform and in the lower part of the denture base, and installed were a clasp partial denture, an attachment partial denture, and a Konus crown partial denture. Then, the vertical static load of 5kgf and 7.5kgf at the occlusion surface of the lower left No. 6 molar was generated for a total of 20 frequencies of load each using a push-full gauge, and thus a change in the output of the strain gauge was measured. With the respective application of Konus crown, attachment and RPI clasp in the free-end partial denture, surveyed was the distribution of stress imposed on the abutment teeth and the denture base according to the location of occlusion force load so as to come up with the following results. 1. Konus crown and attachment partial dentures generated much stress, and more stress on the abutment teeth than RPI clasp dentures did. Attachment dentures tended to further intensify stress on the abutment teeth than Konus crown dentures did. 2. Attachment dentures and Konus dentures imposed less stress on the denture base than RPI clasp dentures did. There was no stress difference between Attachment and Konus crown dentures. 3. Dentures that were designed with the application of retainers using sturdy linkage methods tended to be less mobile.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.1
• /
• pp.56-65
• /
• 2002

The purpose of this study was to investigate the level of alienation, depression, suicidal ideation and delinquency in high school students and to explore the relationships between the variables. The respondents, 226 students attending a high school located in Chonnam province made up the convenience sample. Data were collected using a structured questionnaire which included the alienation scale, suicidal ideation scale, BDI, and delinquency scale. Data collection was done between June 20 and July 6, 2001. Data were analyzed with the SAS program and included descriptive statistics, t-test, ANOVA and Pearson's correlation coefficients. There were no significant association between alienation and general characteristics of the students. The scores for depression were significantly higher in female students, in students who had recently dropped in their school ranking compared to students who had improved. The scores of suicidal ideation were significantly higher in male students. Also, the scores of delinquency were significantly higher in male students, and students in the high economic class and those with low school rankings. There were significant positive correlations between alienation and other ; alienation and depression (r= .432, p= .000), alienation and suicidal ideation (r= 267. p= 000), and alienation and delinquency (r= 150, p= .024). Findings from this study suggest that subsequent practical study in consideration of Korean sociocultural background is needed to identify the cause of alienation and develop supportive strategies to maintain mental health in high school students. Also, study on alienation of students should be based on family, community and popular culture in combination with improvements in school environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.413-420
• /
• 2020

The Tactical Information and Communication Network system provides real-time multimedia services such as voice and data by utilizing the Mobile Subscriber Access Point. At this time, an external transmission path is constructed through the Low Capacity Trunk Radio and the High Capacity Trunk Radio system. The communication devices of each wireless transmission system are mounted on a tactical vehicle and a secondary battery is used to prevent a power interruption when the supply power to the tactical vehicle is transferred to the integrated power control device. In this paper, the basic design of the Wireless Power Transfer device for charging the battery of the integrated power control system of the mobile base station system using the Loading Distribution Method and checking the number of primary windings and the core material selection by the air gap through the Finite Elements Method.