• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.63-73
• /
• 2016

PURPOSES : The objective of this study was to analyze variations in the vehicle driving behavior characteristics on signalized intersections according to the use of traffic enforcement camera (red light camera). METHODS : In order to analyze the driving behavior characteristics on signalized intersections when red light camera are installed, the target sites for investigation were selected depending on whether the red light camera is installed and accident rates increased after the installation. In particular, to analyze the characteristics of dilemma zones in signalized intersections, approach speed and deceleration speed of 3 type vehicles (passing vehicles during a yellow light, stopping at a yellow light, passing vehicles during a green light) were examined. Based on these data, the starting point, ending point, and distance of the dilemma zones were calculated. Also, the locations of increased traffic accidents and decreased accidents after the installation of the equipment were distinguished when analyzing the traffic accident characteristics. RESULTS : Analysis results revealed that there was a tendency for the dilemma zone distance to decrease after the installation of equipment(red light camera) in most sites. This tendency was found to be due to the decrease in the approaching speed of vehicles at intersections after the installation of equipment, resulting in the starting and ending points of dilemma zone to become closer to the stop line. Moreover, analysis showed that the number of traffic accidents decreased for most intersections after the installation of equipment and safety of the intersections increased somewhat. CONCLUSIONS : In general, installation of equipment(red light camera) caused the intersections approaching speed and dilemma zone distance to decrease. Decision-making is difficult for drivers in the dilemma zone, so the decrease in the dilemma zone distance implies an improvement in traffic safety. Furthermore, the number of accidents within intersections significantly decreased after the equipment was installed, leading to the conclusion that installation of the equipment affected the decrease in traffic accidents.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.112-128
• /
• 2018

We are implementing pedestrian priority zone policy to certain districts to reduce greenhouse gas and to develop eco-friendly city which has more focus on pedestrians' walking environment. This policy has contributed to citizens' satisfaction level with improved public transportation service as well as more spacious streets for walk. Despite highly positive influence of pedestrian priority zone policy to the walking environment, we need to anticipate the impact of this to traffic environment as it may have bad effect to the overall traffic flow around the zone where the policy is implemented. This research has analyzed the change of characteristics of traffic accidents around the eco-traffic area of Hang-Gung dong, Suwon city, to understand impact of the pedestrian priority zone policy to the traffic surroundings, with pre-post analysis methodology. As a result, number of accidents related to pedestrians showed decrease as pedestrian priority zone is designed operated with focus to pedestrians. But accidents related illegal U-turn and violation of the traffic signal showed (significant) increase as there was a restriction of turns and decrease of overall traffic speed. To prevent the accidents above, we need to notice drivers to pay special attention before the pedestrian priority zone event, and information from this research should be given to the drivers through safety signs and mobile application at the place near to the event.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.251-259
• /
• 2013

This paper is aimed to introduce to a moving bollard (i.e., smart bollard) to improve the pedestrian safety along the crosswalk in the school zone as a means to physically separate pedestrians and approaching vehicles, to propose the appropriate criteria for its installation and implementation from the traffic engineering perspective, and to evaluate its effectiveness with the microscopic simulation model. The simulation results indicate that implementing the smart bollard results in the decrease of average approaching speed and traffic throughput and the most critical factors affecting its effectiveness are yellow time of the traffic signal directly associated with the location of the advance warning sign and its operation time, 5~6 seconds and 2~3 seconds, respectively.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2352-2366
• /
• 2024

Reinforced concrete (RC) shear walls with precast steel-concrete composite modular (PSCCM) are strongly recommended in the structural design of nuclear power plants due to the need for a large number of process pipeline crossings and industrial construction. However, the effect of the PSCCM on the mechanical behavior of the whole RC shear wall is still unknown and has received little attention. In this study, three 1:3 scaled specimens, one traditional shear wall specimen (TW) and two shear wall specimens with the PSCCM (PW1, PW2), were designed and investigated under cyclic loadings. The failure mode, hysteretic curve, energy dissipation, stiffness and strength degradations were then comparatively investigated to reveal the effect of the PSCCM. Furthermore, numerical models of the RC shear wall with different PSCCM distributions were analyzed. The results show that the shear wall with the PSCCM has comparable mechanical properties with the traditional shear wall, which can be further improved by adding reinforced concrete constraints on both sides of the shear wall. The accumulated energy dissipation of the PW2 is higher than that of the TW and PW1 by 98.7 % and 60.0 %. The failure of the shear wall with the PSCCM is mainly concentrated in the reinforced concrete wall below the PSCCM, while the PSCCM maintains an elastic working state as a whole. Shear walls with the PSCCM arranged in the high stress zone will have a higher load-bearing capacity and lateral stiffness, but will suffer a higher risk of failure. The PSCCM in the low stress zone is always in an elastic working state.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.115-115
• /
• 2018

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.97-106
• /
• 2001

This paper considers automated storage and retrieval systems with double shuttle. We developed the expected travel time model based on the first come first served rule. An heuristic procedure by retrieval order sequencing was presented which aimed to improve the operation efficiency laking advantage of ＂No cost zone＂. Through sensitivity study, we evaluated the performance of the double shuttle system working on the four command cycle.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.135-140
• /
• 2004

Wear mechanisms may be briefly classified by mechanical, chemical and thermal wear. A plane strain finite element method is used with a new material stress and temperature fields to simulate orthogonal machining with continuous chip formation. Deformation of the workpiece material is healed as elastic-viscoplastic with isotropic strain hardening and the numerical solution accounts for coupling between plastic deformation and the temperature field, including treatment of temperature-dependent material properties. Effect of the uncertainty in the constitutive model on the distributions of strait stress and temperature around the shear zone are presented, and the model is validated by comparing average values of the predicted stress, strain, and temperature at the shear zone with experimental results.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.130-135
• /
• 2017

This study deal with the traffic accident. The purpose of this study is to develop the accident density models reflecting the transportation and socioeconomic characteristics based on 230 zones of Korea. In this study, The models which are tested to be statistically significant are developed through multiple linear regression analysis. The main research results are as follows. First, in the transportation-based model, road length, avenue ratio, number of intersections and tunnels are analyzed to be positive to the model, however, school zone is analyzed to be negative to the model. Second, in the socioeconomic-based model, population density, transportation vulnerable ratio, children and truck ratio are analyzed to be positive to the model. Finally, in the integrated models, road ratio, population density, transportation vulnerable ratio, children ratio, truck ratio and number of companies are analyzed to be positive, however, school zone is analyzed to be negative to the model. This results could be expected to give good implications to accident-reduction policy-making.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.3
• /
• pp.354-365
• /
• 2019

Megabenthos samples were collected using 10-min trawls towed at 17 stations from 2015 to 2016. The dominant species (>1% of the total density) were Stegophiura sterea (10.4%) and two subtropical species, Mactrinula dolabrata (9.0%) and Acila divaricate (8.3%), respectively. The community structure of the megabenthos fell into four groups: the southeast, the southernmost region off Jeju Island, the frontal zone of the South Sea with C3, and a diagonal area from the south coast to the western side of Jeju Island. The total numbers of species, diversity, density and biomass were higher in the C3 region of the South Sea. Environmental factor analysis showed that differences in the megabenthos community were related to depth, gravel contents, and sorting value (${\sigma}$). These results indicate that changes in the marine environmental conditions in the South Sea of Korea affect the megabenthos species' composition and diversity.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.489-498
• /
• 2016

The objective of this study is to develop road traffic accident model involving child pedestrian especially at school zones and its surrounding area. The analysis is based upon traffic accident data collected near sixty elementary schools in City of Cheongju during 2012 and 2014. This study results in two statistical models ; one is to predict the number of road traffic accidents involving children, and the other is to predict EPDO(Equivalent Prperty Damage Only). These models are represented as Poisson models. which are statistically significant with the likelihood ratios of 0.533 and 0.273. The common explanatory variables of these models are the ratio of road section with more than 4 lanes, the number of entrance and exit, the number of signalized crosswalk in school zone, the number of school zone signage including road surface marking, and the number of speed limit signs. The specific variables are the length of road stretch in school zone, the number of reflector mirrors, and the number of signalized crosswalk outside school zone. It is concluded that these types of road safety facilities can reduce the number of traffic accidents involving children at school zones and its surrounding area.