• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.7
• /
• pp.929-939
• /
• 2011

The effects of micronization on in situ and in vitro nutrient disappearances of wheat, barley and corn were investigated in a series of experiments. In Experiment 1, chemical composition and in situ dry matter disappearance (DMD) of six varieties of wheat were determined. In addition, an in vitro study was completed using ground micronized and unmicronized wheat (var. Kansas). In Experiment 2, three varieties of wheat (Kansas, Sceptre and Laura) and in Experiment 3, three cereal grains (wheat, barley and corn) were either micronized for 1 min to attain internal kernel temperatures of 90-100$^{\circ}C$ or not (controls), and DM, protein and starch disappearances were estimated. In Experiment 2, an in vitro study was also completed using ground micronized and unmicronized wheat (var. Kansas). Wheat samples varied with respect to crude protein (10.0-21.2%), starch (61.6-73.9%), NDF (8.5-11.8%), volume weight (753-842 g/L) and kernel hardness (0.0-32.0). Rate (p = 0.003) and extent (p = 0.001) of in situ DMD differed among wheat varieties. Correlations between in situ kinetics, and chemical and physical properties of wheat varieties showed that protein content was negatively correlated with the rate of disappearance ($r^2$ = -0.77). Micronization of all grains markedly reduced (p = 0.001) the rate and extent of DM, and protein disappearances as compared to control samples. Micronization increased (p<0.05) the digestion of starch in wheat. However, release of ammonia into the incubation medium was markedly reduced (p<0.05), suggesting that micronization increased the resistance of protein to microbial digestion. Disappearances of DM, protein and starch differed (p = 0.001) among cereal grains with wheat>barley>corn. Micronization reduced the rate of DM disappearance (p = 0.011) and slowly degradable protein fractions (p = 0.03), however, increased (p = 0.004) slowly degradable starch fractions of all three cereals. Examination of in situ samples by scanning electron microscopy confirmed that microbial colonization focused on starch granules in micronized grains, and that the protein matrix exhibited resistance to microbial colonization. These results suggest that micronization may be used to increase the ruminal escape value of protein in cereal grains, but may lead to increased starch digestion if grains are finely ground.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.417-425
• /
• 2019

Biocontrol agents (BCAs) are widely used to protect plants from diverse biotic and abiotic stresses in agricultural and ecological fields. Among the various microbes, many subspecies of the gram-positive genus, Bacillus, have been successfully industrialized as eco-friendly biological pesticides and fertilizers. In the current study, we demonstrated that Bacillus thuringiensis C25 exhibited antagonistic effects on the mycelial growth of Rosellinia necatrix, a fungal phytopathogen. Scanning electron microscopy analysis revealed that B. thuringiensis C25 degraded the cell wall structures of R. necatrix mycelia. In the functional genomic analysis of B. thuringiensis C25, we annotated 5,683 genes and selected the gene sets that potentially encoded fungal cell wall degrading enzymes (CWDEs). The growth inhibition effects on R. necatrix were highly correlated with the transcriptional activity of the mycelial cell wall degrading genes of B. thuringiensis C25. The transcript levels of CWDEs, including CshiA, B, and Glycos_transf_2 genes in B. thuringiensis C25, were enhanced following co-cultivation with R. necatrix. In conclusion, our study suggested that B. thuringiensis C25 could serve as a suitable candidate for controlling R. necatrix and could facilitate elucidating the mechanisms underlying the antifungal activities of BCAs against phytopathogens.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.561-566
• /
• 2005

Polycrystalline silicon films were deposited using hot wire CVD (HWCVD). The deposition of silicon thin films was approached by the theory of charged clusters (TCC). The TCC states that thin films grow by self-assembly of charged clusters or nanoparticles that have nucleated in the gas phase during the normal thin film process. Negatively charged clusters of a few nanometer in size were captured on a transmission electron microscopy (TEM) grid and observed by TEM. The negatively charged clusters are believed to have been generated by ion-induced nucleation on negative ions, which are produced by negative surface ionization on a tungsten hot wire. The electric current on the substrate carried by the negatively charged clusters during deposition was measured to be approximately $-2{\mu}A/cm^2$. Silicon thin films were deposited at different $SiH_4$ and $H_2$ gas mixtures and filament temperatures. The crystalline volume fraction, grain size and the growth rate of the films were measured by Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The deposit ion behavior of the si1icon thin films was related to properties of the charged clusters, which were in turn controlled by the process conditions. In order to verify the effect of the charged clusters on the growth behavior, three different electric biases of -200 V, 0 V and +25 V were applied to the substrate during the process, The deposition rate at an applied bias of +25 V was greater than that at 0 V and -200 V, which means that the si1icon film deposition was the result of the deposit ion of charged clusters generated in the gas phase. The working pressures had a large effect on the growth rate dependency on the bias appled to the substrate, which indicates that pressure affects the charging ratio of neutral to negatively charged clusters. These results suggest that polycrystalline silicon thin films with high crystalline volume fraction and large grain size can be produced by control1ing the behavior of the charged clusters generated in the gas phase of a normal HWCVD reactor.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.31-42
• /
• 2001

In this study, we obtained fundamental data about Korean raw lacquer's physical and chemical properties to produce high quality lacquer. The tested raw lacquers were obtained from Won-ju in Korea, Shanxishang, Guizhoushang, Anhuishang in China. The drying time of refining lacquers, tensile strengths of dried films and uniformity of films are measured. The refined lacquers were prepared by experimentally scaled refining equipment. Films of lacquer were applied on glasses by film applicator. This films were tested by universal strength test machine. The films were pictured by scanning electron microscopy and confocal microscopy to define the uniformity of them. The refining method were not different among three different kind of raw lacquers which were different their collecting time and places. But the viscosity of them were quite different. When black refined lacquer is made with iron powder, the adding time of iron powder is critical to control the viscosity of it. The refining times, viscosity and tensile strength of refined lacquers were not depended the method of refining condition but the place of collecting of raw lacquer.

• The Journal of the Korean bone and joint tumor society
• /
• v.5 no.1
• /
• pp.9-16
• /
• 1999

A new method of limb sparing by resection, extracorporeal irradiation and reimplantation has several theoretical advantages. This method preserves the mobility of a joint and avoids the problem of loosening or breakage of tumor prosthesis. This study involved using extracorporeal irradiated autogenous joint transplantation for reconstruction after en bloc resection, and observed the periods of functional union and histological changes in irradiated tissue of the knee joint. This study also aimed to clarify whether the degeneration of articular cartilage is induced in rabbits by a single 50Gy dose of irradiation at the knee joint. Twenty New Zealand rabbits about three kilograms were randomized into two groups of 10 rabbits each. In group 1, as control, we resected the knee joint followed by reimplantation without irradiation. Group 2 received extracorporeal irradiation on the resected knee joint followed by reimplantation. Following are the results of these observations. The osteotomy site showed external callus formation in the roentgenographic finding eight weeks after reimplantation. There was marked degenerative changes in the collagen fiber of the irradiated anterior cruciate ligament and meniscus during the fourth week, but new blood-vessel formation was observed in the vicinity. There was degenerative changes in the collagen fiber of articular cartilage treated extracorporeal irradiation at four and eight weeks in the scanning electron micrographic findings. These findings was in contrast to those of subchondral bone which showed decreased cellularity and empty lacuna at four and eight weeks. Autoradiography demonstrated active [$^3H$]uridine incorporation by irradiated chondrocyte at eight weeks after reimplantation. These results indicate that when destruction of the articular cartilage and soft tissue of the knee joint is not severe, extracorporeal irradiation and reimplantation can be used with several advantage in maintaining movement of the joint while avoiding problems of tumor prosthesis and rejection, and therefore extracorporeal irradiated autogenous joint transplantation can be used as a limb-sparing procedure for temporary biological spacer in the childhood bone tumor around the knee.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.212-226
• /
• 2010

Objective: The aim of this study was to evaluate the effect of remineralization and inhibition to demineralization after fluoride gel (acidulated phosphate fluoride, APF) or hydroxyapatite (HAp) paste application on interdentally stripped teeth. Methods: After interdental stripping, 1.23% APF or 5%, 10% HAp paste were applied for 7 days for remineralization. Afterwards, teeth were exposed to lactate carbopol buffer solution for demineralization. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were used to compare change in surface contents and crystal structures after remineralization, and then after demineralization. Results: EDS analysis indicated that calcium (p < 0.001) and phosphate (p < 0.01) contents were increased after 10% HAp paste application on stripped enamel, calcium (p < 0.05) and phosphate (p < 0.01) contents were increased after 5% HAp paste application, and fluoride (p < 0.01) contents were increased after 1.23% APF application. SEM image showed that enamel surfaces became smoother and crystal structures became small and compact after APF or HAp application. After demineralization, calcium (p < 0.05) and phosphate (p < 0.05) contents remained increased on the enamel remineralized with 10% HAp paste, and phosphate (p < 0.05) contents remained increased on the enamel remineralized with 5% HAp paste. After demineralization, surfaces looked less destroyed in the enamel remineralized beforehand than those of the control, and small pores between crystal structures, formed by remineralization were remained. Conclusions: Hydroxyapatite paste and fluoride gel were helpful to remineralize and inhibit deminerlization on stripped enamel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.537-543
• /
• 2019

Alumina(Al₂O₃) is a ceramic material used in industry with a range of particle sizes and characteristics. In this study, a boehmite sol was prepared by a hydrolysis and peptizing process using the Sol-Gel method from aluminum isopropoxide (AIP). γ-Al₂O₃ was prepared by drying and calcining. To prevent particle agglomeration during the manufacturing process, four kinds of polyvinyl alcohol (PVA) with molecular weights of 9,000~10,000, 31,000~50,000, 89,000~98,000, and 130,000 were added and three concentrations of HNO₃ (0.1, 0.3, 0.5 molar ratio) were added to determine their effects on the particles. The crystal structure, composition, particle size and shape of the prepared γ-Al₂O₃ were confirmed through x-ray diffraction (XRD), x-ray fluorescence analyzer (XRF), particle size analyzer (PSA), and field emission scanning electron microscopy (FE-SEM). As a result, γ-Al₂O₃ with a purity of approximately 98.2% was synthesized, and the particle size decreased and the uniformity increased with increasing ratio of HNO₃ addition and PVA molecular weight. From these results, the particle size can be controlled during the manufacturing process of γ-Al₂O₃ by controlling the addition ratio of PVA and HNO₃.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2020

Objectives: The purpose of this case study is to assess workers' exposure to carbon nanotubes(CNTs) and characterize particles aerosolized during the process of producing CNT-enabled polytetrafuoroethylene(PTFE) composites at a worksite in Korea. Methods: Personal breathing zone and area samples were collected for determining respirable concentrations of elemental carbon(EC) using NIOSH(National Institute for Occupational Safety and Health) Method 5040. Personal exposure to nano-sized particles was measured as the number concentration and mean diameter using personal ultrafine particle monitors. The number concentration by particle size was measured using optical particle sizers(OPS) and scanning mobility particle sizers(SMPS). Transmission electron microscopy (TEM) area samples were collected on TEM grids and analyzed to characterize the size, morphology, and chemistry of the particles. Results: Respirable EC concentrations ranged from 0.04 to 0.24 ㎍/㎥, which were below 23% of the exposure limit recommended by NIOSH and lower than background concentrations. Number concentrations by particle size measured using OPS and SMPS were not noticeably elevated during CNT-PTFE composite work. Instant increase of number concentrations of nano-sized particles was observed during manual sanding of CNT-PTFE composites. Both number concentrations and mean diameters did not show a statistically significant difference between workers handing CNT-added and not-added materials. TEM analyses revealed the emission of free-standing CNTs and CNT-PTFE aggregate particles from the powder supply task and composite particles embedded with CNTs from the computer numerical control(CNC) machining task with more than tens of micrometers in diameter. No free-standing CNT particles were observed from the CNC machining task. Conclusions: Significant worker exposure to respirable CNTs was not found, but the aerosolization of CNTs and CNT-embedded composite particles were observed during handing of CNT-PTFE powders and CNC machining of CNT-PTFE composites. Considering the limited knowledge on the toxicity of CNTs and CNT composite particles to date, it seems prudent to take a precautionary approach for the protection of workers' health.

• The Journal of Internal Korean Medicine
• /
• v.35 no.1
• /
• pp.12-23
• /
• 2014

Objectives : The purpose of this study was to report possibility of acupuncture or moxibustion for the treatment of Parkinson's disease (PD) by reviewing literature about its effectiveness. Methods : In this review, PubMed, SCOPUS, Science Direct and CINAHL of EBSCOhost were used to search medical journals, using keywords "Parkinson's disease and acupuncture" and "Parkinson's disease and moxibustion". The search range included randomized controlled trials (RCT) about Parkinson's disease combined with another disease and other treatments with acupuncture or moxibustion. Non-randomized controlled trial (nRCT), case study, animal experiment, human experiment, review, survey, essay, letter, and protocol for review were excluded. Results : From 311 studies, 111 were selected during the title and the screening. Finally, 16 RCTs (15 for acupuncture research and one for moxibustion) were included in this review, after scanning and matching the inclusion and exclusion criteria. The number of patients varied between 5 and 88. A total of 12 studies using electroacupuncture (EA) were classified into acupuncture studies. The body acupuncture studies numbered 4, scalp acupuncture 4, body and scarp acupuncture mixed studies 4, and bee venom, ear and abdomen acupuncture were each one study. In evaluation methods, total effective rate method was used in 9 studies, the Unified Parkinson's Disease Rating Scale (UPDRS) was used in 8, and the Webster score in 2. In addition, the Berg balance scale (BBS), 30 m walking time, steps to walk 30 m, PD motor function score, and Motor Performance Series by Schoppe (MLS) method were used for evaluation. In 15 of the 16 studies, the verum acupuncture group showed significant improvement compared with the control. In 9 studies using total effective rate method, the effective rate was reported as 80.0-97.3% in verum acupuncture groups and 52.6-86.4% in controls. Conclusions : Acupuncture may be a plausible alternative method to care for the long term symptoms and treat movement impairment of Parkinson's disease. However, to confirm this result, high quality studies including randomized, placebo-controlled double-blind trials are warranted.

• Journal of Dairy Science and Biotechnology
• /
• v.25 no.1
• /
• pp.55-60
• /
• 2007

Contents of scorched particles in infant formula were studied to provide a scientific evidence for standardization of Food Regulation in Korea. The specification of scorched particles in infant formula in Korea was satisfied with CODEX, USDA and so on. But food regulations for scorched particles in baby food are not mentioned in Korea. Nowadays social interests of scorched particles in infant formula are being increased in the respect of safety for baby food. The composition and contents of scorched particles were analyzed with Scanning Electron Microscope-Energy Dispersive X-ray Spectrometer(SEM-EDS) and Inductively Coupled Plasma Mass Spectrometer(ICP-MS). The results indicate that the scorched particles consist Ca, Na, Fe, Mg and trace elements derived from the ingredient of infant formula. Infant formula are composed of milk, skimmed milk, whey, mixed vegetable oils, minerals and vitamins. These results also show that the contents of scorched particles of infant formula in Korea are little or similar level to those reported in other countries. In general, heavy metals derived from scorched particle are originally used as a source of minerals in infant formula. And it has been thought that they doesn't effect on Provisional Tolerable Weekly Intake set by FAO/WHO for contents and composition of scorched particles.