• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.462-467
• /
• 2013

In this paper, we analyzed the effects of doctoring process on the patterns of Ag ink in gravure off-set printing. The parameters of doctoring process were the angle and the pressure, which was represented by the depth of blade movement to the gravure roll, of doctor blade to the surface of gravure roll, and the angle of patterns engraved on the gravure roll to the doctor blade moving direction. The proper parameters were extracted for the fine patterns and they were 15 mm for the pressure, $60^{\circ}$ for the blade angle. And the angle of patterns with respect to the blade movement should be less than $40^{\circ}$ for the best results. The gravure off-set printing with the above parameters was carried out to print gate electrodes and scan bus lines of OTFT-backplane for e-paper. The line width of $50{\mu}m$ was successfully obtained. The thickness of electrodes was $2.5{\mu}m$ and the surface roughness was $0.65{\mu}m$ and the sheet resistance was $15.8{\Omega}/{\Box}$.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.246-252
• /
• 1996

$Bi_{2}Te_{3}-Sb_{2}Te_{3}$, $Bi_{2}Te_{3}-Bi_{2}Se_{3}$ solid solutions are of great interest as materials for thermoelectric energy conversion. One of the key technologies to ensure the efficiency of thermoelectric device is to obtain chemically homogeneous solid solutions. In this work, the new process with rapid solidification followed by hot pressing was investigated to produce homogeneous thermoelectric materials. Characteristics of the materials were examined with XRD, SEM, EPMA-line scan and bending test. Property variations of the materials were investigated as a function of variables, such as excess Te quantity and hot pressing temperature. Quenched ribbons are very brittle and consisted of homogeneous $Bi_{2}Te_{3}$, $Sb_{2}Te_{3}$ solid solutions. When the process parameters were optimized, the maximum figure of merit was 3.073$\times$$10^{-3}K^{-4}$. The bending strength of the material, hot pressed at 45$0^{\circ}C$, was 5.87 kgf/${mm}^2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.206-211
• /
• 2005

The device makers want to make higher density chips on the wafer through scale-down. The change of WSix/poly-Si gate film thickness is one of the key issues under 100 nm device structure. As a new device etching process is applied, end point detection(EPD) time delay was occurred in DPS+ poly chamber of Applied Materials. This is a barrier of device shrink because EPD time delay made physical damage on the surface of gate oxide. To investigate the EPD time delay, the experimental test combined with OES(Optical Emission Spectroscopy) and SEM(Scanning Electron Microscopy) was performed using patterned wafers. As a result, a EPD delay time is reduced by a new chamber seasoning and a new wavelength line through plasma scan. Applying a new wavelength of 252 nm makes it successful to call corrected EPD in WSix/poly-Si stack-down gate etching in the DPS+ poly chamber for the current and next generation devices.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.278-280
• /
• 1999

This paper proposes controlling of temperature in an oven by using 4 bits Integral - Cycle Binary Rate Modulation (IBRM) method and ac line with frequency 50 Hz. Microcontroller MCS-51 controls IBRM according to Proportional Integral controller (PI) function. Discrete signals are used in the system modeled by using Ziegler Nichols principle for analyzing the stability before designing the system. This procedure makes it easy to investigate system response. The system is implemented by 4 bits digital circuit which gives 320 patterns of ac signal fur controlling the generation of energy for 3,000 watts thermal coil every 20 ms of each cycle. We divide scan time (Ts$\sub$n/) in to 20 intervals, 1 ms interval is selected to generate 16 patterns IBRM. Because of this method gives the ripple lower than 2% it generates less noise fur system. Moreover, we can consider whole system from the time model of control procedure and IBRM algorithm at 40-200$^{\circ}C$ with ${\pm}$ 1$^{\circ}C$ error in the 1 cubic meter oven.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.46-52
• /
• 2009

A Multi-Core/Multi-Thread architecture is adopted for the Shader processor to enhance the processing performance. The Shader processor is designed to utilize its processing core IP for multiple purposes, such as Vertex-Shading, Rasterization, Pixel-Shading, etc. In this paper, we propose a 'Rasterization based on Vector Algorithm' that makes parallel pixels processing possible with Multi-Core and Multi-Thread architecture on the Shader Core. The proposed algorithm takes only 2% operation counts of the Scan-Line Algorithm and processes pixels independently.

• Journal of Korean Elementary Science Education
• /
• v.31 no.3
• /
• pp.386-397
• /
• 2012

The purpose of this study was to find a way to improve the science textbook graph through analyzing teachers' interpretation process with eye movement tracking when they try to read the science textbook graph. Participants in this project were 10 elementary school teachers while bar graphs, line graphs, pie charts in 2007 revision science textbooks were used as materials. SMI (SensoMotoric Instruments)' iView X TM RED 120 Hz was used in order to collect eye movement data. Although subjects paid attention to the title of the graph at first, the consequence of the eye fixation was changed by the composition of the graph in case of the rest of areas. In particular, the flow of visual attention and fixation time were affected by the form and configuration of the graph. The diversity of graph construction caused confusion in interpreting graphs; the manner of presenting title, the difference of background colors, size of characters, the name of X-axis and Y-axis. Out results showed that the conformation of graphs as well as the presentation of each factor should be composed in accordance with the educational purpose for helping users to easier understanding.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.3
• /
• pp.178-181
• /
• 2008

Although endovascular intervention is the first-line treatment of intracranial aneurysm, intraprocedural rupture or extravasation is still an endangering event. We describe two interesting cases of extravasation during embolotherapy for ruptured peripheral cerebral pseudoaneurysms. Two male patients were admitted after development of sudden headache with presentation of intracerebral and subarachnoid hemorrhage, respectively. Initial angiographic assessment failed to uncover any aneurysmal dilatation in both patients. Two weeks afterwards, catheter angiography revealed aneurysms each in the peripheral middle cerebral artery and anterior inferior cerebellar artery. Under a general anesthesia, endovascular embolization was attempted without systemic heparinization. In each case, sudden extravasation was noted around the aneurysm during manual injection of contrast after microcatheter navigation. Immediate computed tomographic scan showed a large amount of contrast collection within the brain, but they tolerated and made an unremarkable recovery thereafter. Intraprocedural extravasation is an endangering event and needs prompt management, however proximal plugging with coil deployment can be sufficient alternative, if one confronts with peripheral pseudoaneurysm. Peculiar angiographic features are deemed attributable to extremely fragile, porous vascular wall of the pseudoaneurysm. Accordingly, it should be noted that extreme caution being needed to handle such a friable vascular lesion.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.137-142
• /
• 1999

The purpose of this study is to develope a CAD-based tool for rasterization of polygonal vector map in AutoCAD. To identity the layer property of polygonal entity with user-defined coordinates as topology, algorithm in processing entity data of selection set that intersected with scan line was used, and the layers were extracted sequentially by sorted intersecting points in data-list. In addition to the functions for querying and modifying topology, two options for mapping were set up to construct plan projection type and to change meshes' properties in existing DTM data. In case of plan projection type, user-defined cell size of 3DFACE mesh is available for more detailed edge, and topological draping on landform can be executed in case of referring DTM data as an AutoCAD's drawing. The concept of algorithm was simple and clear, but some unexpectable errors were found in detecting intersected coordinates that were AutoCAD's error, not the utility's. Also, the routines to check these errors were included in algorithmic processing. Developed utility named MESHMAP was written in entity data control functions of AutoLISP language and dialog control language(DCL) for the purpose of user-oriented interactive usage. MESHMAP was proved to be more effective in data handling and time comparing with GRIDMAP module in LANDCADD which has similar function.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.555-560
• /
• 2008

두 장의 2차원 영상을 가지고 3차원을 재구성하기 위해서는 스테레오 정합을 이용한다. 이러한 이유로 그 동안에 많은 스테레오 정합에 대한 연구가 진행되었다. 스테레오 정합은 컴퓨터 기술의 발전과 더불어 좀 더 빠르고 높은 정확성을 보이고 있다. 하지만 속도와 정확성을 동시에 만족시키면서 대형영상에서도 동작할 수 있게 메모리을 적게 사용하는 방법은 많지가 않다. 본 논문에서는 이런 요구 조건을 만족시키기 위하여 새로운 스테레오 정합방법을 제시한다. 우리가 제시하는 새로운 방법은 다중 방향성 Greedy 알고리즘과 RANSAC을 반복적으로 사용하여 영상전체에 대한 스테레오 정합을 시도하는 방법이다. 우선 Greedy 알고리즘을 이용하여 여러 방향의 scan-line을 따라 깊이값 영상을 구한다. 그리고 이 여러 장의 깊이값 영상들의 분포를 RANSAC을 이용하여 신뢰영역을 찾아낸다. 구해진 신뢰영역을 바탕으로 Greedy 알고리즘과 RANSAC을 수 차례 반복하여 신뢰영역을 확장해 나가면 최종 깊이값 영상을 얻는다. 우리가 제안하는 알고리즘은 적은 메모리로도 큰 영상의 정합이 가능하고, 속도와 정확도 측면에서도 우수한 결과를 보인다.