• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.143-152
• /
• 2002

The growth of Polypyrrole film has been investigated during electropolymerization in an aqueous solution on bare and SAM modified gold electrodes by in-situ EQCM and ex-situ AFM. According to the result of cyclic voltammetry measurements, in the case of a bare gold electrode, the electrochemical deposition of polypyrrole were dependent on the limiting oxidative potential, but not on scan numbers. When the limiting potential higher than 0.8 V was applied on the electrode, the amount of polypyrrole deposited on a gold electrode was rapidly increased and the abnormal mass change attributed to the rearrangement of polypyrrole films was observed as the scan number increased. The polypyrrole film Prepared on electrodes modified with 1-dodecanethiol SAM or thiophene SAM grew 3-dimensionally with the rearrangement of film. However, in the case of BPUS SAM, 2-dimensional layer-by-layer growth of film was observed without the rearrangement of film. AFM images showed films with chain-shaped and/ or donut-shaped polymers when grown rapidly and a wrinkled film at the steady state condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.707-714
• /
• 2010

Since an LFSR(linear feedback shift register) as a pattern generator has solely linear dependency in itself, it generates sequences by moving the bit positions for pattern generation. So the correlation between the generated patterns is high and thus reduces the possibility of fault detection. To overcome these problems many researchers studied to have goodness of randomness between the output test patterns. In this paper, we propose the new and effective method to construct phase shifter as PRPG(pseudo random pattern generator).

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.

• The Korean Journal of Pain
• /
• v.18 no.1
• /
• pp.52-55
• /
• 2005

Complications following a well conducted epidural steroid injection are rare. A 50-year-old man developed a headache and neck stiffness 2 days after a lumbar epidural steroid injection. Under the impression of aseptic meningitis, fluid and nonsteroidal anti-inflammatory drug therapy was started immediately after cerebrospinal fluid (CSF) sampling. The CSF was turbid, and revealed a white blood cell count, protein, glucose and pressure of $550/{\mu}l$ (98% lymphocyte), 107.9 mg/dl, 48 mg/dl (serum 113 mg/dl) and $17cmH_2O$, respectively. The CSF stain and culture, and antibody test and polymerase chain reaction for pathogens were negative. A computed tomography (CT) scan of the brain revealed no abnormality, and a chest roentgenogram and the results of the neurological examination were normal. Under the impression of aseptic meningitis, the condition was managed conservatively, without antibiotics. Seven days later, the clinical symptoms had improved, and the patient discharged.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.343-346
• /
• 2009

Since an LFSR as a pattern generator has solely linear dependency in itself, it generates sequences by moving the bit positions for a pattern generation. So the correlation between the generated patterns is high and thus reduces the possibility of fault detection. To overcome these problems many researchers have studied to have goodness of randomness between the output test patterns. In this paper, we propose the new and effective method to construct phase shifter as PRPG.

• Journal of Genetic Medicine
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2008

Purpose : Fragile X syndrome (FXS) is the most common heritable cause of cognitive impairment. FXS is caused by hyperexpansion and hypermethylation of a polymorphic CGG trinucleotide repeat in the 5' untranslated region of the fragile X mental retadation-1(FMR1) gene. Combination of Southern blotting and simple polymerase chain reaction(PCR) amplification of the FMR1 repeat region is commonly used for diagnosis in females. To give a definite diagnosis in a female child suspected of having FXS, we carried out the molecular diagnostic test for FXS using the recently developed Abbott Molecular Fragile X PCR Kit. Methods : The PCR amplification of the FMR1 repeat region was performed using the Abbott Mdecular Fragile X PCR Kit. The amplified products were analyzed by size-separate analysis on 1.5% agarose gels and by DNA fragment analysis using Gene scan. Results : Agarose gel and Gene scan analyses of PCR products of the FMR1 repeat region showed that the patient had two heterozygous alleles with a normal 30 repeats and full mutation of >200 repeats whereas her mother had two heterozygous alleles with the normal 30 repeats and premutation of 108 repeats, suggesting that the premutation of 108 repeats in her mother may have led to the full mutation of >200 repeats in the patient. Conclusion : We diagnosed FXS in a female patient using a simplified molecular diagnostic test. This commercially available diagnostic test for FXS, based on PCR, may be a suitable alternative or complement method to Southern blot analysis and PCR analysis and/or methylation specific(MS)-PCR analysis for the molecular diagnosis of FXS in both males and females.

• Molecules and Cells
• /
• v.43 no.5
• /
• pp.438-447
• /
• 2020

The aim of this study was to explore the role of IL-6-miR-210 in the regulation of Tregs function and atrial fibrosis in atrial fibrillation (AF). The levels of interleukin (IL)-6 and IL-10 in AF patients were detected by using ELISA. Proportions of Treg cells were detected by fluorescence activated cell sorting analysis in AF patients. The expression of Foxp3, α-SMA, collagen I and collagen III were determined by western blot. The atrial mechanocytes were authenticated by vimentin immunostaining. The expression of miR-210 was performed by quantitative real-time polymerase chain reaction (qRT-PCR). TargetScan was used to predict potential targets of miR-210. The cardiomyocyte transverse sections in AF model group were observed by H&E staining. The myocardial filaments were observed by masson staining. The level of IL-6 was highly increased while the level of IL-10 (Tregs) was significantly decreased in AF patients as compared to normal control subjects, and IL-6 suppressed Tregs function and promoted the expression of α-SMA, collagen I and collagen III. Furthermore, miR-210 regulated Tregs function by targeting Foxp3, and IL-6 promoted expression of miR-210 via regulating hypoxia inducible factor-1α (HIF-1α). IL-6-miR-210 suppresses regulatory T cell function and promotes atrial fibrosis by targeting Foxp3.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.540-543
• /
• 2007

The modulation transfer function (MTF) in a camera system is a measurement of how well the system will faithfully reproduce the original scene. The electro-optical camera system consists of optics, an array of pixels, and an electronics which is related to the image signal chain. The system MTF can be cascaded with each element's MTF in the frequency domain. That is to say, the electronics MTF including the detector MTF can be recalculated easily by the acquired system MTF if the well-known test optics is used in the measuring process. A Time-Delay and Integration (TDI) detector can make a signal increase by taking multiple exposures of the same object and adding them. It can be considered the various methods to measure the MTF of the TDI camera system. This paper shows the actual and practical MTF measuring methods for the detector and electronics in the TDI camera. The several methods are described according to the scan direction as well as the TDI stages such as the single line mode and the multiple-lines mode. The measuring is performed in the in the static condition or dynamic condition to get the point spread function (PSF) or the line spread function (LSF). Especially, the dynamic test bench is used to simulate on track velocity to synchronize with TDI read out frequency for the dynamic movement.

• Molecules and Cells
• /
• v.38 no.4
• /
• pp.304-311
• /
• 2015

Most follicles in the mammalian ovary undergo atresia. Granulosa cell apoptosis is a hallmark of follicle atresia. Our previous study using a microRNA (miRNA) microarray showed that the let-7 microRNA family was differentially expressed during follicular atresia. However, whether the let-7 miRNA family members are related to porcine (Sus scrofa) ovary follicular apoptosis is unclear. In the current study, real-time quantitative polymerase chain reaction showed that the expression levels of let-7 family members in follicles and granulosa cells were similar to our microarray data, in which miRNAs let-7a, let-7b, let-7c, and let-7i were significantly decreased in early atretic and progressively atretic porcine ovary follicles compared with healthy follicles, while let-7g was highly expressed during follicle atresia. Furthermore, flow cytometric analysis and Hoechst33342 staining demonstrated that let-7g increased the apoptotic rate of cultured granulosa cells. In addition, let-7 target genes were predicted and annotated by TargetScan, PicTar, gene ontology and Kyoto encyclopedia of genes and genomes pathways. Our data provide new insight into the association between the let-7 miRNA family in granulosa cell programmed death.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.1
• /
• pp.13-21
• /
• 2010

IEEE 1149.1 test architecture was proposed to support the test of elements within the boards. It is a large serial shift register that uses the TDI pin as an input and the TDO pin as an output. Even though it performs the board level test perfectly, there is a problems of running system level test when the boards are equipped to the system. To test real time operation signal on test pin, output speed of serial shift register chain must be above double clock speed of shift register. In this paper, we designed a runtime test architecture and a runtime test procedure under running system environments to capture runtime signal at system clock rate. The suggested runtime test architecture are simulated by Altera Max+Plus 10.0. through the runtime test procedure. The simulation results show that operations of the suggested runtime test architecture are very accurate.