• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.133-139
• /
• 2007

Future MEMS systems will be composed of larger varieties of devices with very different functionality such as electronics, mechanics, optics and bio-chemistry. Integration technology of heterogeneous devices must be developed. This article first deals with the current development trend of new fabrication technologies; those include self-assembling of parts over a large area, wafer-scale encapsulation by wafer-bonding, nano imprinting, and roll-to-roll printing. In the latter half of the article, the concept towards the heterogeneous integration of devices and functionality into micro/nano systems is described. The key idea is to combine the conventional top-down technologies and the novel bottom-up technologies for building nano systems. A simple example is the carbon nano tube interconnection that is grown in the via-hole of a VLSI chip. In the laboratory level, the position-specific self-assembly of nano parts on a DNA template was demonstrated through hybridization of probe DNA segments attached to the parts. Also, bio molecular motors were incorporated in a micro fluidic system and utilized as a nano actuator for transporting objects in the channel.

• 대한조선학회지
• /
• 제24권4호
• /
• pp.1-8
• /
• 1987

In this paper negative drift forces are discussed, which act on a two-dimensional cylinder exposed to slightly modulated waves in water of finite depth. By combining matched asymptotic expansion method with multiple scale technique, it is clearly shown that the slowly-varying drift force can be negative under certain circumstances: i) Incident waves are irregular or slightly modulated. ii) The water depth is finite compared to the wave length of carrier waves. iii) The gap between the keel of the cylinder and ocean floor is narrow. Then the negative drift forces are caused by the unbalance of hydrostatic force associated with set down. Real fluid and wave breaking effects are not considered.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.49-65
• /
• 1992

The writer did a survey of current textile patterns for the purpose of identifying a motif trend. After identifying a current motif trend the writer used an IBM PC 386 Computer and Lumena Software to design actual patterns. The results are as follows: 1. The most common currently used prints are floral patterns. 2. Knowing that floral patterns are most popular, the writer established a motif using the Rose of Sharon, the national flower of Korea. 3. Using computer graphics to move, enlarge and scale-down motif, the writer has been able to design various textile patterns. 4. Creating patterns with computer graphics was not only more efficient, but it also produced more accurate designs and a greater variety of designs. 5. Using the many computer graphic functions avaliable, a greater variety of patterns changes and compositions can be displayed than would be possible if produce by hand. 6. Computer simulations of textiles and clothing made it possible to evaluate the printed fabric or finished product. Faults in the printed fabric or clothing could be corrented before production. Through simulation then it is possible to create higher quality garments and readuce costly mistakes. Thereby greater profits will be realized from the finished garments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.240-243
• /
• 2002

본 논문에서는 칼라 이미지에서 색상 요소를 기초로 하여 얼굴영역을 추출하고 얼굴의 특징요소를 추출하는 방법을 제안한다. 얼굴 영역을 추출하기 위하여 일반적인 얼굴색상분포를 이용하여 색상변환을 하였다. 얼굴 특성요소를 찾기 위하여 윤곽선검출을 이용하였다. 얼굴영역의 상단부분에서 눈의 요소를 찾고, 눈과 입의 지정학적 위치를 이용하여 입의 후보영역을 지정하고 입을 찾도록 하였다. 검색영역을 좁혀 계산량을 줄임으로서 탐색시간을 줄일 수 있고, 일반적인 얼굴색상분포를 이용하여 얼굴 영역을 검출함으로서 얼굴표정, 얼굴색변화, 기울짐에 대해서도 얼굴영역을 검출할 수 있었다.

• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.77-83
• /
• 2009

Operating medium or large scale industrial boilers in partial load condition, the burner should undergo the off-design points resulting in poor exhaust gas characteristics. To obtain the stable turn down performance, two or more burners can be used for the industrial boiler. In case multiple burners are adopted, the heat transfer can be enhanced by arranging the burners properly. In the present study, numerical simulations have been conducted for the combustion chamber of a 2 t/h class industrial boiler in order to clarify the heat transfer characteristics at the combustion chamber.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.569-572
• /
• 2010

초음속 추력편향 노즐의 시험 평가를 위한 시험 장치를 설계 하였다. 본 시험 장치는 축소된 모델추력편향장치를 이용하여 초음속 추력 편향시의 축추력, 모멘트, 배기가스 속도 및 압력 등을 측정하여 다양한 기하학적 변수에 대한 노즐의 성능특성을 이해하고자 한다. 본 시험장치는 고압 공기저장장치, 유량조절 및 측정장치, 시험노즐과 계측시스템으로 구성되어 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1280-1285
• /
• 2004

Microsystem technology has been applied to space technology and became one of the enabling technology by which low cost and high efficiency are achievable. Micro propulsion system is a key technology in the miniature satellite because micro satellite requires very small and precise thrust force for maneuvering and attitude control. In this paper research on micro solid propellant thruster is reported. Micro solid propellant thruster has four basic components; micro combustion chamber, micro nozzle, solid propellant and micro igniter. In this research igniter, solid propellant and combustion chamber are focused. Micro igniter was fabricated through typical micromachining and evaluated. The characteristic of solid propellant was investigated to observe burning characteristic and to obtain burning velocity. Change of thrust force and the amount of energy loss following scale down at micro combustion chamber were estimated by numerical simulation based on empirical data and through the calculation normalized specific impulses were compared to figure out the efficiency of combustion chamber.

• 설비공학논문집
• /
• 제14권1호
• /
• pp.55-62
• /
• 2002

In this paper, several types of infiltration prevention devices that are currently in use have been studied through experimental investigation. Firstly, the types of infiltration prevention devices were defined through investigating actual conditions of refrigerated warehouse in operates. Based on this investigation results, measured change of temperature and figured out air change rates of the type of infiltration prevention devices by using scale down model. After that, found the amount of air change rate in order to estimate the load of air change easily in facility plan.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.14-17
• /
• 2002

The HDP (High Density Plasma) CVD process consists of a simultaneous sputter etch and chemical vapor deposition. As CMOS process continues to scale down to sub- quarter micron technology, HDP process has been widely used fur the gap-fill of small geometry metal spacing in inter-metal dielectric process. However, HBP CVD system has some potential problems including plasma-induced damage. Plasma-induced gate oxide damage has been an increasingly important issue for integrated circuit process technology. In this paper, thin gate oxide charge damage caused by HDP deposition of inter-metal dielectric was studied. Multiple step HDP deposition process was demonstrated in this work to prevent plasma-induced damage by introducing an in-situ top SiH$_4$ unbiased liner deposition before conventional deposition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.419-421
• /
• 2003

송전선로에서 발생하는 전자계에 대한 관심이 증가함에 따라 이를 저감하는 방법에 대한 연구도 활발하게 진행되고 있다. 본 논문에서는 송전선로에 적용할 수 있는 전자계 저감방법중 하나인 수동루프에 대한 성능을 송전선로의 축소모형 실험을 통해 나타내고 그에 대한 결과를 이론적인 계산 값과 비교하였다. 약 1/20 크기로 축소한 송전선로 모형을 제작한 다음 몇 가지 전압, 전류를 인가하여 선로 주변 전자계를 측정하여 그 결과를 정리하였다.