• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.291.1-291
• /
• 2002

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.417-417
• /
• 2012

나노복합체를 이용하여 제작한 유기 쌍안정성 형태의 비휘발성 메모리 소자는 간단한 공정과 플렉서블 기기에 응용 가능성 때문에 많은 연구가 진행되고 있다. 나노복합체를 사용하여 제작한 비휘발성 메모리 소자의 전기적 성질에 대한 연구는 많이 진행되었으나, Scale-dwon 효과를 고려한 연구가 미흡하다. 본 연구에서는 polyestrene (PS) 박막 층 내부에 분산된 InP 나노입자를 사용한 메모리 소자를 제작하여 전기적 특성을 관찰하였다. InP 나노입자를 PS와 용매인 octadecene에 용해한 후에 초음파 교반기를 사용하여 두 물질을 고르게 섞었다. 고도핑된 Si 기판위에 100 nm 두께의 $SiO_2$ 위에 InP 나노입자와 PS가 섞인 용액을 스핀 코팅한 후, 열을 가해 용매를 제거하여 InP 나노입자가 PS에 분산되어 있는 나노복합체 박막을 형성하였다. 형성된 나노복합체 박막 위에 상부 전극으로 Al을 열증착하여 비휘발성 메모리 소자를 제작하였다. 제작된 메모리 소자는 Al 전극을 마스크를 사용하여 플라즈마 에싱 장비로 에칭을 하였다. 에칭된 소자와 에칭하지 않은 소자의 정전용량-전압 특성을 측정하였다. Flat band 이동은 에칭된 소자가 0.3 V이며 에칭하지 않은 소자는 1.3 V이다. 실험 결과는 에칭을 통해 전기장에 영향 받는 영역이 작아지므로 flat band 이동이 줄어들었다. 에칭방법을 통한 scale-down 효과로 정전용량이 줄어드는 것을 알 수 있었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.63-69
• /
• 2012

This paper describes novel scheme of a gray scale capacitive fingerprint image for high-accuracy capacitive sensor chip. The typical gray scale image scheme used a DAC of big size layout or charge-pump circuit of non-volatile memory with high power consumption and complexity by a global clock signal. A modified capacitive detection circuit of charge sharing scheme is proposed, which uses DLC(down literal circuit) based on a neuron MOS(vMOS) and analog simple multiplexor. The detection circuit is designed and simulated in 3.3V, $0.35{\mu}m$ standard CMOS process. Because the proposed circuit does not need a comparator and peripheral circuits, a pixel layout size can be reduced and the image resolution can be improved.

• Plant Journal
• /
• v.12 no.1
• /
• pp.24-28
• /
• 2016

In desulfurization facilities of oil-fired power plant, gypsum scale is attached in the absorber inner surface as the operating time increases. For this reason, the maximum possible load of the power generation is set down, resulting in further generation stop. Cleaning of absorber for scale removal can be determined at the time of setting down of the maximum possible load. In this study, 6 weeks before the maximum possible load of the power generation was down set, at the same time and desulfurization facilities outlet $SO_2$ concentration value was more than 130ppm, absorber differential pressure exceeded $380mmH_2O$, it was confirmed to be the time that has elapsed 44 weeks after the previous absorber cleaning. Cleaning time of the absorber was predicted to be a time which has elapsed 50 weeks from the previous cleaning time.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.421-431
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing due to the influence of global warming. In a situation where the installation of floating wind turbines is increasing around the world, concerns about the huge loss and collapse of floating offshore wind turbines due to strong typhoons are deepening. Regarding to the safe operation of the floating offshore wind turbine, the development of a new type of disconnectable mooring system is required. A new fairlead chain stopper considered in this study is devised to more easily attach or detach the floating offshore wind turbine with mooring lines comparing to other disconnectable mooring apparatuses. In order to investigate the structural safety of the initial design of fairlead chain stopper that can be applied to MW-class floating type offshore wind turbine, scale-down structural models were produced using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by performing the tensile tests. The finite element analysis of fairlead chain stopper was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the finite element analysis, the structural weak parts on the fairlead chain stopper were reviewed. The structural model tests were performed considering the main load conditions of fairlead chain stopper, and the test results were compared to the finite element analysis. Through the results of this study, it was possible to experimentally verify the structural safety of the initial design of fairlead chain stopper. It is also judged that the study results can be usefully used to improve the structural strength of fairlead chain stopper in a detailed design stage.

• Physical Therapy Korea
• /
• v.20 no.1
• /
• pp.28-35
• /
• 2013

The purpose of this study was to determine the effects of warm-up and cool-down exercises on pain and muscle activation of delayed onset muscle soreness after intense exercise. Delayed onset muscle soreness was caused by the eccentric exercise in the elbow flexor muscle of the non-dominant upper limb. Forty-four subjects volunteered to participate in this study and were randomly assigned to one of the following groups: warm-up and cool-down group, only warm-up group, only cool-down group, or control group with no intervention. The level of perceived pain using the visual analogue scale and electromyographic activation change in maximal voluntary isometric contraction were measured 4 times at the following times: 10 min, 24 hr, 48 hr, and 72 hr after the exercise. The results revealed the main effect between the groups and interaction effect between the group and measurement session (p<.05). The warm-up and cool-down group showed most favorable results with respect to reduced perceived pain level and increased muscle strength in most measurement sessions, and the only warm-up group showed significantly more decreased pain level than the control group at 24 hr and 48 hr and more increased muscle activation than the cool-down group at 48 hr (p<.05). However, there were no significant differences in pain level and muscle activation between the only cool-down group and control group at all measurement sessions (p>.05). The findings suggest that the warm-up exercise performed before an intense exercise had beneficial effects on the symptoms of delayed onset muscle soreness, whereas cool-down exercise performed after the intense exercise did not.

• The Journal of Pediatrics of Korean Medicine
• /
• v.26 no.4
• /
• pp.61-70
• /
• 2012

Objectives: Literature Study of clinical cases with Traditional Chinese Medicine (TCM) as reference for Korean medicine based treatment of juvenile patients with Down's syndrome. Methods: 4 TCM journals with the highest impact factors were searched and selected among the journals listed in www.cnki.net. The search keywords were "蒙古症", "唐氏症(産生唐氏症)", "唐氏症候群", "先天愚型", "伸舌樣痴呆", "21三体綜合徵", "三染色体症", "Down's syndrome", and "Mongolism". Accordingly, searched papers were analyzed. Results: Total 6 studies were selected: RCT(5), case report(1). Among the RCT related studies, 2 studies tested the effect of Electroacupuncture (電鍼), 1 study tested the effect of Electroacupuncture and Pharmacopuncture (藥鍼) treatment together, and 2 studies tested the effect of Electroacupuncture and Herbal Medicines (藥物) co-treatment. In all the studies, the study groups showed significantly improved intelligence quotient (IQ) in comparison with the control groups. The case report showed improvement of cognitive ability and other clinical parameters as a result of Acupuncture (鍼) and Herbal Medicines co-treatment in juvenile patients with Down's syndrome. Conclusions: Clinical studies testing the effect of TCM for the treatment of Down's syndrome have been conducted in small scales, and all the studies showed a certain level of brain function improvement of the patients in the study groups. These results implicate that the methods in Korean medicine can be highly potential treatment options for the treatment of Down's syndrome. Conduction of accurate and well-controlled studies in large scale would be required to prove the effect of Korean medicine for the treatment of patients with Down's syndrome.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.3
• /
• pp.79-86
• /
• 2011

Background : The purpose of this study was to investigate on the ankle pain, Range of Motion(ROM) and balance ability with old man have fall down experience used to ankle strengthening exercise for 6 weeks. We introduced ankle strengthening exercise in this study in order to recover the pain, ankle ROM and balance ability. Methods : Twenty-four old mans have fall down experience were included for the study. Among them, twelve old mans(experimental group) were ankle strengthening exercise and physical science methods(H/P, TENS, U/S), another twelve old mans(control group) were treated by physical science methods(H/P, TENS, U/S). Each group made use of Visual Analogue Scale(VAS) to pain and goniometer to ankle ROM and Berg Balance Test(BBS) to balance ability to compare the possible changes of pain, ROM and balance ability in two groups after treatment. Results : In experimental group, pain reduced, ankle ROM has increased in dorsi-flexion, plantar-flexion and balance ability has increased for 6 weeks. In control group, pain reduced, ankle ROM has not changed in dorsi-flextion, plantar-flextion and balance ability has not changed for 6 weeks. Conclusion : According to the results, we concluded that ankle strengthening exercise for 6 weeks is effective for reducing pain and increasing ankle ROM and balance ability. Therefore, we thought the old man have fall dawn experience need ankle strengthening exercise for prevention repeatedly fall down.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2009

A study for the nonlinear solution strategies to predict the ultimate behavior of a curved PSC cable-stayed bridge with complex geometry and highly nonlinear characteristics is presented. The load and displacement control strategies are used and found to be stable for the nonlinear solution of the PSC bridge up to the moderately excessive load. The ultimate analysis of curved PSC cable-stayed bridge using these solution strategies is not converged due to the propagation of the cracks in the wide range of the concrete elements and excessive variation of the stresses in the concrete elements and cables according to the complex geometry. The load control strategy using scale-down of the unbalanced loads is proposed as an alternative method for the case that the solution is not converged due to the severe nonlinearities involved in the PSC structures like a curved PSC cable-stayed bridge. Through the ultimate analysis of the PSC girder, the accuracy and the stability of the proposed solution strategies are evaluated. Finally, the numerical results for the ultimate analysis of the curved PSC cable-stayed bridge using scale-down of the unbalanced loads are compared with those obtained from other investigator. The validity of the proposed nonlinear solution strategy is demonstrated fairly well.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.57-64
• /
• 2002

This paper describes the results of a series of experiments executed by using two pilot-scale oxv-fuel burners are designed for maximum capacity of 50,000 kacl/hr, 300,000 kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, swirl vane angle and inlet oxygen temperature on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and inlet oxygen temperature. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, Optimum excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.